similar to: PRI protocols

I'm having difficulty getting a PRI working between asterisk and a Merlin Legend. I have been attempting to get it going as esf, b8zs & 5ess (although I have tried other switchtypes...). I found the following info in the Legend docs: If the switch type is 5ESS, the protocol MUST be set for ATT Custom. If switch type is DMS-100, the protocol MUST be set for NTNAPRI The README in

> -----Original Message----- > From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users- > bounces@lists.digium.com] On Behalf Of Troy Settle > Sent: Wednesday, September 14, 2005 7:03 AM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [Asterisk-Users] MAX PRI for single server (was:Not > enoughlinesavailable for Asterisk implemetation)

Hi, Is libpri rpm version 1.4.12 for CentOS 5.6 made available ? [root@ ~]# rpm -qa | grep libpri libpri-1.4.11.5-1_centos5 [root@ ~]# cat /etc/redhat-release CentOS release 5.6 (Final) [root@ ~]# [root@ ~]# yum list updates | grep libpri [root@ ~]# Please suggest/guide further. Regards, Kaushal

Hi Guys, I am running a PBXinaFLASH server. I replaced contents of /usr/src/libpri with the new version of Libpri v1.4.11. The installed one was v1.4.10. System is running Asterisk 1.4.21.2. I did the following after: cd /usr/src/libpri/ make make clean make install Install end with these lines.....: *ln -sf libpri.so.1.4 libpri.so* *mkdir -p /usr/lib* *mkdir -p /usr/include* *install -m 644

I have a dataset with two variables that are factors: 1) Decision Making Satisfaction (DMS), values = A - Completely, B - Mostly, C - Partly, D - Not at all 2) IT Satisfaction values (ITS), values = A - Completely, B - Mostly, C - Partly, D - Not at all I would like to produce a table (matrix) and a chart of the factors, with counts at the cross sections: A B C D A B

Hi All; I have an E1 card with two ports for ISDN PRI. Do I need to install DAHDI in addition to LIBPRI? For placing outside calls (outgoing) via the PRI, then in the extension.exe file, I will use the Dial function? But how can I determine that I need to use the PRI channels and not the analoge channels? Last point: how can I know that asterisk is containing libpri? In other words, how can I

If you are looking for real high density VOIP termination I would look at > something like a Lucent APX 8000, configure correctly it can pass 2500+ > g.729 calls to the PSTN course we paid lots of $ for ours. > > Chris > Chris, My experience has been that the APX and TNT products require a single SIP proxy, how are you load balancing 2500 calls? If all of the traffic is

I have not been able to get two B-channel transfer to work on DMS100 PRI. I consistently get the following errors: [Nov 6 11:12:49] ERROR[2774]: chan_zap.c:8178 zt_pri_error: ROSE RETURN ERROR: [Nov 6 11:12:49] ERROR[2774]: chan_zap.c:8178 zt_pri_error: OPERATION: RLT_OPERATION_IND [Nov 6 11:12:49] ERROR[2774]: chan_zap.c:8178 zt_pri_error: ERROR: RLT Not Allowed I have tried on two

Okay, now I am really confused. I have two PRI's coming in from two different Carriers (QWEST and ELI), both of them are supposed to be setup to pass name and number on incoming calls. Problem that I am having is that I am not receiving inbound caller id name on either PRI, the only thing that both carriers have in common is that I am terminating into a DMS switch at the carrier.

Using CVS-HEAD libpri, CVS-HEAD zaptel, CVS-STABLE asterisk. Everything compiled fine. No problems loading chan_zap.so. Incomming calls to PRI work fine. Outbound is a different story: -- Executing Dial("SIP/64.72.107.4-4122fb40", "ZAP/R1d/18005551212|60") in new stack -- Called R1d/18005551212 -- Channel 0/23, span 1 got hangup Mar 13 13:19:29 WARNING[28835]:

I have an issue with one of my installations running Asterisk 1.4.20 that I need some help with. Not sure if this is new or not but Zaptel or Libpri is not releasing channels properly. I have had issues with calls that stay up for eight hours, long distance on the telco side, so it is more than just a nuisance. Does anyone know if there was a related bug in the 1.4 branch of Asterisk, Zaptel,

hello, In a machine I've got : CLI> pri set debug off No such command 'pri set debug off' (type 'core show help pri set' for other possible commands) CLI> core show help pri pri intense debug span <no description available> pri service disable channel Remove a channel from service pri service enable channel Return a channel to service pri set debug

First of all, I'd like to send a big "thank you" to all the folks who have helped me get this far. Now on to the next problem. Here's my current network setup: The Big I ---+--- FreeBSD FW --- * (10.0.0.253) ---- PC (10.0.0.1) | +--- Laptop (public IP) natd is set up with the following rules: redirect_port udp 10.0.0.253:10000-20000 10000-20000

I'm putting together a PBX using a TE420P card configured for E1s that is connected to an Errickson MTS. successfully compiled and installed libpri 1.4.11.3, DAHDI 2.3.0.1+2.3.0 and Asterisk 1.6.2.9. everythings seems to be working. SIP phone to SIP phone (POLYCOM) calls work fine however, network calls do not. When I went to debug PRI, the only command that showed up when I did ">CLI

hi, i have the problem that i'm not able to set and receive the Service Indication (SIN) from our E1-PRI and from our ericsson BP250. The problem is, that the Bearer Capability (BC) together with the High Level Compatibility (HLC) and Low Level Compatibility (LLC) forms the Service Indicator (SIN). The SIN is used to determine if the call is voice, fax or data. It's essential to set

Hi Guys, Running the following with a Sangoma A101D PRI card: *Asterisk 1.4.21.2* *LibPRI version: 1.4.10* No inbound or outbound calls can be made. In fact Asterisk CLI doesn't show any activity. Problem goes away on restart of the system or maybe asterisk. I see post about upgrading Libpri to 1.4.10.2 and then I see posts that even that didn't work. Anyone can weigh in this please?

Anyone using 5ess with success? I have a customer that wants to use it. Seems to WORK for a short time then there are errors on the D-channel and their side (nortel switch) shuts down the channel. They were saying something about a slip error. I dont know this term. I am using dahdi 2.1.0.4 and asterisk 1.4.22 and libpri 1.4.7 Any ideas? jerry

On Tue, Apr 3, 2018 at 4:57 PM, Matt Fredrickson <creslin at digium.com> wrote: > On Tue, Apr 3, 2018 at 4:38 PM, Tony Mountifield <tony at softins.co.uk> > wrote: > > In article <CAHZ_z=w5DMg93gShtC93kuC+fnmraPgV46BS956U5BQXVgyhxg@ > mail.gmail.com>, > > Matt Fredrickson <creslin at digium.com> wrote: > >> On Tue, Apr 3, 2018 at 5:44 AM, Tony

Anyone configured a E1 PRI in Kuala Lampur, Malaysia with TM Malaysia? What signaling did they provide, framing, formatting? primary-4ess Lucent 4ESS switch type for the U.S. primary-5ess Lucent 5ESS switch type for the U.S. primary-dms100 Northern Telecom DMS-100 switch type for the U.S. primary-dpnss DPNSS switch type for Europe primary-net5 NET5 switch type for UK,

Hi list, I'm trying to setup an asterisk 1.8.0 with MFC/R2, but I'm having these error messages loading chan_dahdi: > module load chan_dahdi.so ERROR[9241]: chan_dahdi.c:11848 mkintf: Signalling requested on channel 1 is MFC/R2 but line is in ISDN PRI signalling ERROR[9241]: chan_dahdi.c:16180 build_channels: Unable to register channel '1-15' I got the config in