asterisk users - Mar 2005 - PRI Call Reference Length not Supported

Using CVS-HEAD libpri, CVS-HEAD zaptel, CVS-STABLE asterisk.

Everything compiled fine. No problems loading chan_zap.so.

Incomming calls to PRI work fine. Outbound is a different story:

    -- Executing Dial("SIP/64.72.107.4-4122fb40",
"ZAP/R1d/18005551212|60")
in new stack
    -- Called R1d/18005551212
    -- Channel 0/23, span 1 got hangup
Mar 13 13:19:29 WARNING[28835]: chan_zap.c:7149 zt_pri_error: PRI: Call
Reference Length not supported: 0
    -- Zap/23-1 is circuit-busy
    -- Hungup 'Zap/23-1'
  == Everyone is busy/congested at this time

I've never experienced this before. Anyone have any ideas? I'm going to
revert back to STABLE versions of libpri and zaptel and see if I get the
same error.

-Matthew

check your entensions.conf file /etc/asterisk/extensions.conf

..... ${ETEN:${TRUNKMSD}})

we had same problem this was the fix



----- Original Message ----- 
From: "Matthew Boehm" <mboehm@cytelcom.com>
To: "Asterisk Users" <asterisk-users@lists.digium.com>
Sent: Sunday, March 13, 2005 1:23 PM
Subject: [Asterisk-Users] PRI Call Reference Length not Supported

> Using CVS-HEAD libpri, CVS-HEAD zaptel, CVS-STABLE asterisk.
>
> Everything compiled fine. No problems loading chan_zap.so.
>
> Incomming calls to PRI work fine. Outbound is a different story:
>
>    -- Executing Dial("SIP/64.72.107.4-4122fb40",
"ZAP/R1d/18005551212|60")
> in new stack
>    -- Called R1d/18005551212
>    -- Channel 0/23, span 1 got hangup
> Mar 13 13:19:29 WARNING[28835]: chan_zap.c:7149 zt_pri_error: PRI: Call
> Reference Length not supported: 0
>    -- Zap/23-1 is circuit-busy
>    -- Hungup 'Zap/23-1'
>  == Everyone is busy/congested at this time
>
> I've never experienced this before. Anyone have any ideas? I'm
going to
> revert back to STABLE versions of libpri and zaptel and see if I get the
> same error.
>
> -Matthew
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users

On Sun, Mar 13, 2005 at 01:23:55PM -0600, Matthew Boehm
wrote:
> Using CVS-HEAD libpri, CVS-HEAD zaptel, CVS-STABLE asterisk.
> 
> Everything compiled fine. No problems loading chan_zap.so.
> 
> Incomming calls to PRI work fine. Outbound is a different story:
> 
>     -- Executing Dial("SIP/64.72.107.4-4122fb40",
"ZAP/R1d/18005551212|60")
> in new stack
>     -- Called R1d/18005551212
>     -- Channel 0/23, span 1 got hangup
> Mar 13 13:19:29 WARNING[28835]: chan_zap.c:7149 zt_pri_error: PRI: Call
> Reference Length not supported: 0
>     -- Zap/23-1 is circuit-busy
>     -- Hungup 'Zap/23-1'
>   == Everyone is busy/congested at this time
> 
> I've never experienced this before. Anyone have any ideas? I'm
going to
> revert back to STABLE versions of libpri and zaptel and see if I get the
> same error.
Can you post a pri debug while this occurs... I put a lot of changes
into libpri recently.  I don't think that any of them should affect the call
reference, but I'm curious to see what's happening.

Matthew Fredrickson