mishka at efro.us
2010-Sep-29 20:57 UTC
[asterisk-users] can't get libpri/PRI to work, missing PRI commands
I'm putting together a PBX using a TE420P card configured for E1s that is connected to an Errickson MTS. successfully compiled and installed libpri 1.4.11.3, DAHDI 2.3.0.1+2.3.0 and Asterisk 1.6.2.9. everythings seems to be working. SIP phone to SIP phone (POLYCOM) calls work fine however, network calls do not. When I went to debug PRI, the only command that showed up when I did ">CLI core show help pri" was 'pri intense debug span' which seemed strange to begin with and when I did ">CLI pri intense debug span 1", I got something strange like "'pri set debug 2 span 1' is not a valid command". Tried reinstalling everything but keep getting the same result. Also, when I try to make call from SIP phone to a wireless phone and vise versa on our GSM network, I get something like "Call to extension ######## rejected because the extension is not found in context POLYCOM#" but it is definitely in the extensions.conf with a line "exten => 1,1,Dial(dahdi/g1/#########xxx)". Please help... Thanks
Lee, John (Sydney)
2010-Sep-30 07:49 UTC
[asterisk-users] can't get libpri/PRI to work, missing PRI commands
In Asterisk, the funny thing is if a certain component is not installed properly or the config file has a typo or something, this will be shown up as a non-existent command in Asterisk command line interface.> -----Original Message----- > From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users- > bounces at lists.digium.com] On Behalf Of mishka at efro.us > Sent: Thursday, 30 September 2010 6:57 AM > To: asterisk-users at lists.digium.com > Subject: [asterisk-users] can't get libpri/PRI to work, missing PRI > commands > > I'm putting together a PBX using a TE420P card configured for E1s thatis> connected to an Errickson MTS. successfully compiled and installedlibpri> 1.4.11.3, DAHDI 2.3.0.1+2.3.0 and Asterisk 1.6.2.9. everythings seemsto> be working. SIP phone to SIP phone (POLYCOM) calls work fine however, > network calls do not. When I went to debug PRI, the only command that > showed up when I did ">CLI core show help pri" was 'pri intense debug > span' which seemed strange to begin with and when I did ">CLI priintense> debug span 1", I got something strange like "'pri set debug 2 span 1'is> not a valid command". Tried reinstalling everything but keep gettingthe> same result. Also, when I try to make call from SIP phone to awireless> phone and vise versa on our GSM network, I get something like "Call to > extension ######## rejected because the extension is not found incontext> POLYCOM#" but it is definitely in the extensions.conf with a line"exten> => 1,1,Dial(dahdi/g1/#########xxx)". Please help... > > Thanks > > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users