similar to: TE410P timing and multiple, different spans

Greetings... We've been having some interoperability issues between Asterisk and an AudioCodes Mediant 2000, and, well, I gotta use the Mediant 2000 somewhere. So, I've been pondering using iptel.org's SIP server (SIP Express Router) as a "front end" for PSTN calls going out to the Mediant, while using Asterisk for everything else. Has anyone done something similar, or

Does anyone have a quick and dirty script for defragmenting mailboxes? i.e.: -rwx------ 1 root root 80553 Oct 20 16:27 msg0000.gsm -rw-r--r-- 1 root root 218 Oct 20 16:27 msg0000.txt -rwx------ 1 root root 781164 Oct 20 16:27 msg0000.wav -rwx------ 1 root root 79360 Oct 20 16:27 msg0000.WAV -rwx------ 1 root root 7260 Oct

Since it's all the craze, I might as well post our current Asterisk usage. :-) EQUIPMENT: - Beefyish box (dual Xeon 2.4GHz, gig of RAM, more-than-adequate disk space, etc) in a 1U chassis. - A second, slightly less beefyish box of specs I don't have handy right now, also in a 1U. - 2xTE410P CONNECTIONS: - 1 PRI to telco for local outbound/direct-dial inbound, 300 numbers

I have a problem that sometimes lines will go into what I call never never land. The Asterisk system will put a line with <Zombi> on it when you type show channels it will make the analog phone line dead. And on the CLI it says: astsvr*CLI>Zap/1-2<ZOMBIE>(macro-twoline-exten,s,1)Up Dial Zap/1-2|20|r I have tried to release it with soft hangup Zap/1 & also soft hangup

I have a Mediatrix 1204 FXO gateway setup for SIP. I would like to know if anyone has gotten this item to work with Asterisk. I need to get a 2 or 4 port FX0 gateway working with asterisk. The Idea is the following. PBX at lets say any Hotel(Analog lines FXS) - FX0 Gateway(1204) -- {Internet} -- Asterisk - local IVR system. (IVR is not at present running Asterisk old dialogic system has FX0

Greetings... I'm working on getting an AudioCodes Mediant 2000 big box o' PRI's going with Asterisk, and am running into a problem with DTMF handling. The box is sending DTMF packets to Asterisk as INFO packets, and they are apparently being seen by Asterisk. However, the DTMF knowledge doesn't seem to actually do anything -- the VM system doesn't recognize the digits,

Hi everybody, I want to read to debug messages and try to interpret them but they happen too fast, how can I log these guys to a file, or is there a file like this already? I checked the /var/log/asterisk but there isn't much interesting there yet? How can i turn on logging for SIP,IAX and other things? Thanks, Umut

Hi I am trying to call from Linphone on extention 109 to Xlite on extention 108 and I get this error ---------------------- to 216.75.167.18:5068 WARNING[98315]: File pbx.c, Line 1133 (pbx_extension_helper): No application 'Dial ' for extension (sip, 108, 1) == Spawn extension (sip, 108, 1) exited non-zero on 'SIP/sergeXlite-be43' --------------------- Can you tell me what

I was wondering what are the values for sending dmtf via sip info. I mean, when I use dtmf relay via sip info, the sip/sdp message contains a Signal=X where X is the dmtf. That's ok for dtmf 0-9 . but what when dtmf is * or # ? we must send signal=# ? I ask that because I noticed that budgetones phone sends out * as signal=10 and # as signal=11 . but asterisk don't detect them, 'cause

Hi all! I am looking for some free software to monitoring all the calls that are being done in my network. Which telephone are connected, how long are the calls, quality of service, bandwidht,etc. If someone knows about a good one, plesea tell me. Regards, Mireia

Hey all...I'm just getting my * setup and right now all I have is an FXO but no FXS. I wan't to get rid of telemarketers by having * pick up the phone if there is no CID present, give the caller the Zapateller tones and then ask the user to input their phone number via Privacy Manager (yes I realize that this won't get us any where given that I can't re-ring the phones without FXS

Here's a clip of comments lifted from a Cisco bug list. This will be perhaps useful to those of you who have just purchased a Cisco phone off eBay. JT ------------- (1) Short problem description: Documentation on how to load SIP image on phone with skinny software (2) Longer problem description (what happens): If the phone is loaded with the Cisco Skinny code, then there is a small

Hello Everyone, What kind of hardware setup would I need to do if I want a T1 connection to PSTN and have 48 users in office with analog phones. Will something work if I have a T410P card in asterisk and have one T1 going to PSTN and other two to a channel bank. I would then connect the 48 phones (FXS) to the channel bank! Thanks. Deepak

1st. - I'm from Poland, we don't have (yet, and hopefully forever) software patents. Is there any free g.729.1 implementation for asterisk? I want to use it for my private use (dialing into inet->PSTN gateway), and I don't want (now) to buy codec, as I don't know if I will be using this service in future (now I just want to test it). Any solutions? Maybe even

See attached for new platform timeline; please include platform@fd.o on all proposals/followups/flames/whatever. Oh, and for note's sake, Chris Lee is the other release team member at the moment. ----- Forwarded message from Daniel Stone <daniel@freedesktop.org> ----- Date: Sat, 31 Jul 2004 01:40:19 +1000 From: Daniel Stone <daniel@freedesktop.org> To: platform@freedesktop.org

Hi, One other question I was wondering about. Is the reason that we hear the crosstalk with fec and packet loss percentage>0 is that Opus uses information from the left channel to try to error correct the right channel and vice versa? I am trying to understand the origin of the crosstalk. Thanks. -Jon > On Jan 27, 2017, at 12:29 PM, Jon Lederman <jon at soniccloud.com> wrote: >

Hey List-ee's! We're on Asterisk 1.2 with a PRI/T1 and maybe 50 phones. Issue: When a conference is ongoing (meetme), if a call is placed to a PRI # (CALLER A) the audio from the conference is heard by that caller while the # they dialed is ringing in the background. The opposite also occurs where an outside caller will be heard in the conference channel as well. Frequency: 2-3 times

Hi Jean-Marc, Thank you. Yes, we do need both channels independent. So, if we encode each channel separately, we will be sacrificing the compression ratio we would achieve with stereo encoding, correct? So, based on what you say here is my understanding. Please confirm this is correct or not: 1) If we use fec, we can reduce cross-talk but increasing bitrate. However, that should result in

Thank you. Very helpful. > On Jan 27, 2017, at 12:40 PM, Jean-Marc Valin <jmvalin at jmvalin.ca> wrote: > > On 27/01/17 12:29 PM, Jon Lederman wrote: >> Thank you. Yes, we do need both channels independent. So, if we >> encode each channel separately, we will be sacrificing the >> compression ratio we would achieve with stereo encoding, correct? > > Not

I've just encountered an odd problem with our Digium TE410P card and was wondering if anyone has experienced something similar before. We utilize all 4 ports with 2 of them connected to the PSTN as E1 with the second 2 ports connecting to a device which accepts T1. We are essentially acting as an E1 to T1 converter. This machine has been operational for close to 6 months without a problem.