Displaying 20 results from an estimated 9000 matches similar to: "ISDN BRI hardware"
2004 May 05
7
* & ISDN-BRI-PTP & DID & ISDN4Linux does not show incoming number
Hi,
I am using Asterisk on a DSS1 ISDN-BRI with ISDN4Linux (and a Fritz Card PnP).
The ISDN-BRI is in PTP-Mode (Point to Point "german: Anlagenanschluss")
which is enabled within I4L with "hisaxctrl fcpcipnp0 7 1".
Everything works fine except that I can not see the called number/MSN
of incoming calls within Asterisk and because of this I can not route
incoming calls
2003 Jun 20
3
best ISDN BRI solution for DID
I want to test asterisk with its DID functions on a smaller scale without the expense of a PRI. I am in the US, and want the most reliable/stable, and feature rich solution that I can have.
What ISDN card would be reccommended?
My clec switch operator says he can/will send DID info to my BRI's if I wish. Can Asterisk, or one of its addons support this?
What BRI solution would be
2004 Aug 19
7
Where to purchase ISDN (BRI) cards in Australia (preferably)
Hello all,
I was wondering if anybody knows where one might obtain a PCI ISDN
card supporting a single BRI for use with Asterisk in Australia (and
using something like chan_capi).
Because of the Isdn4Linux DTMF issue, I don't want one of those cards.
I've already spent too much time messing about with my current card.
I'm after something like the AVM Fritz! cards. I found one place
2003 Sep 15
4
ISDN BRI active adapters with NT mode - any alternatives ?
Having ISDN FXOs and a bunch of ISDN DECT base stations, I went looking
for a CAPI compatible active BRI adapter capable of NT mode. I have
found that the 'Eicon Diva Server 4BRI' fulfills theses requirements.
However, at EUR 1387 for four BRI interfaces, it does not come cheap.
Are there other users of similar hardware that can point me to
alternatives ?
2003 May 22
6
OT: BRI ISDN question
I am going to try and use a passive AVM fritz BRI card for my * setup..
Here is the thing.. I need to order my BRI from BT.. The service that looks to be the one to use is what they call ISDN 2e becasue this has the option to setup hunt groups across multiple ISDN2e lines so I could add another line later to get 4 channels..
According to the BT website in order to use the hunt grouping across
2003 Sep 15
1
Anyone using National ISDN (NI-1) BRI under Linux?
I have a North American BRI configured as National ISDN (NI-1) on an
SBC (Nortel?) switch. SBC calls this "FastTrak ISDN", and it's
surprisingly inexpensive -- less than two POTS lines.
I've been trying to find an inexpensive PCI interface solution to
connect this to Asterisk as voice lines. I prefer ISDN BRI over POTS
lines because of the improved signalling, fast dialing,
2004 Aug 13
3
Will this ISDN card work for me?
I'm looking for an ISDN card that will work for me using either the
i4l or capi with asterisk under Linux. I'm in the US, so I need an
ISDN-U interface.
Can anyone tell me if this card will work for me?
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=14922&item=6700879965&rd=1&ssPageName=WDVW
There are a lot available, and for what seems to be a good price,
if
2003 Nov 08
5
Eicon Diva Server 4BRI
Hi Everybody,
Has anybody tried the above (or indeed any other 4XBRI cards) successfully
with Asterisk. As far as I can see the above mentioned card is an active
ISDN card but supported by it's own I4L driver. This leads to interesting
questions particularly regarding echo cancellations (which usually doesn't
work on the cheap passive cards with one exception as far as I can see).
2004 Sep 27
3
chan_capi, Eicon Diva server BRI, kernel 2.6?
Hi list,
Does chan_capi work with kernel 2.6? The Eicon Diva server card loads
fine judging from /var/log/messages but Asterisk gives an error when
trying to load the chan_capi module. I'm using chan_capi-0.3.5,
zaptel-1.0.0, libpri-1.0.0 and asterisk-1.0.0 on a Fedora box with
kernel 2.6.8-1.584. Zaptel and ilbpri work fine as does *. I have seen a
msg that may be related and don't know
2004 Jun 15
3
Outgoing DTMF when using BRI & i4l (Eicon Diva) - problems
Hello all,
This afternoon I had a BRI line installed by Telstra (our telco in
Australia). I'm using an Eicon Diva 2.02 PCI ISDN card with the isdn4linux
driver.
Incoming and outgoing calls with Asterisk work fine (and with no echo - my
main reason for getting ISDN). However, I can't seem to get outgoing DTMF
working (incoming works fine).
I made a call from my desk phone (Cisco 7940G)
2003 Nov 21
2
Which ISDM BRI Card for Asterisk?
Hello all,
I wonder to have some feedback on using ISDN BRI Cards with Asterisk and
the Echo problem.
I have tried a simple BRI card with i4l driver and encounter huge echo
problem. I have tried to solve it with a Sw chocanceller without
success. What I'd like to know is wether some of you have used other BRI
Cards (I have seen reference to Eicon cards on this list) and if the
echo
2005 Jul 07
2
asterisk and wireless on site personal paging system
hi,
we are currently planning are large site which will migrate from an old
siemens hicom pbx to asterisk.
the customer is currently using a paging system (small receivers which
display a callback number and a base station (transmitter) with several
antennas at the site)
the problem is, that the currently operative base station uses 4 ISDN
BRI interfaces. But the protocol is old germany 1TR6
2003 Jul 24
2
isdn4linux
Hello All,
I was just after a few pointers. I have just setup my Redhat 9 linux box
with asterisk. Internal SIP call working fine.
My Eicon ISDN card turned up today so - plugged it in and went through
the modem.conf. It reports unable to open /dev/ttyI0
The problem is I have never used ISDN with Linux - let alone a telephony
app - and I have no idea even where to start. Some pointers
2004 Dec 13
3
Busy message on ISDN cards?
Hi all,
I'm new to asterisk and not too knowledgeable on ISDN, so please be gentle :)
I have a dual-channel Eicon Diehl Diva card in a Debian Woody box with
kernel 2.4.27, connecting to a Telstra (Australia) Onramp Home Highway
ISDN line. I'm pretty certain the card and line both work since
they've been used in this machine for PPP before this (but with an
older kernel with DoV
2004 Apr 29
4
Outgoing DTMF on BRI
If I want to send outgoing DTMF over a BRI interface, can I do it with
'isdn4linux' or must I use the 'capi' library?
--
. . ___. .__ Posix Systems - Sth Africa
/| /| / /__ mje@posix.co.za - Mark J Elkins, Cisco CCIE
/ |/ |ARK \_/ /__ LKINS Tel: +27 12 807 0590 Cell: +27 82 601 0496
-------------- next part --------------
A non-text attachment was
2003 Apr 21
2
Eicon BRI-card
Hello,
I try to use Asterisk with an Eicon-card called "DIVA Server 4BRI-8M PCI" but I don?t get it to work. I?m running on RH8.0. The Eicon-card supports isdn4linux.
In the modem.conf file i have put following:
-----------
[interfaces]
; By default, incoming calls should come in on the "remote" context
context=remote
; Modem Drivers to load
driver=i4l
; Type of dialing
2004 Sep 21
2
ISDN problem: lacking dialtone
Hi all,
this is a rather "newbie-oriented" question, so please bear with me...
The system running Asterisk has been provided with an AVM FRITZ!Card
PnP. SuSE Linux 9.0 recognizes it right after booting the system and it
seems to be configured (MSN) correctly...
The hwinfo looks like this:
---
pbx:/etc/asterisk # hwinfo --isapnp
11: ISA(PnP) 01.0: 10300 ISDN Adapter
[Created at
2003 Apr 30
2
Eicon driver?
Hello,
Does anyone know what driver to use with an "Eicon Diva Server 4BRI" card?
My modem.conf:
--------------
[interfaces]
context=remote
driver=i4l
msn=16453
device => /dev/ttyds01
--------------
I get the following error:
--------------------------
== Loading modem driver chan_modem_i4l.so => (ISDN4Linux Emulated Modem Driver)
WARNING[8192]: File chan_modem.c, Line 383
2003 Mar 02
1
ISDN connection problem (i4l, not asterisk)
Sorry for a slightly off-topic question, but I'm getting desperate.
I tried to use asterisk to talk w/ ISDN line and tracked the problem to i4l.
I have a Diva PCI 2.02 (S/T) card and am running RH8 w/ 2.4.20 kernel
(first version that supports the 2.02 w/ hisax driver). The switch is a
5ESS running NI-1 protocol. The card sync's up and reports other traffic
on the line, but fails to
2005 Feb 28
3
Digium E1/T1 card with mgetty+sendfax
Hi,
For the project I've used the Eicon DIVA card. It has 8 BRI ports,
and for about 25% of the time there are 7 or 8 in use. So we want
to replace it with an E1 card. Only issue is, replace it with what?
The idea we have been playing with was to get a Digium E1 card (we
already have bought lot of Quad E1 cards :-) and then just put it
back to back against Asterisk server. And instead of