similar to: Ztdummy not loaded

I need a timing device for the DL360G2 for conferencing and meetme. For a timing device I have 2 X100P cards but neither will work in my DL360G2. The system will not even boot with either card in the system. Other PCI cards seems to work fine. I called Digium support and was told that there must be a conflict between the card and my Compaq DL360G2. I then moved on to ztdummy. I'm sure the

Does anyone know where to disable rtc support on redhat 9.0 using make menuconfig? I thought I disabled it but still got the following error when trying to make zaprtc: zaprtc.c:109: storage size of `rtc_irq_timer' isn't known zaprtc.c:719: storage size of `rtc_fops' isn't known zaprtc.c:107: warning: `DECLARE_WAIT_QUEUE_HEAD' declared `static' but never defined make: ***

I followed the Wiki instructions to get zaptel to work on Fedora core 2. It looked like everything went perfect including the loading of ztdummy. However, I am having meetme and MOH problems synonymous with ztdummy not loading. Take a look at my lsmod...Any ideas? (I am running stable Asterisk on a DL360 - Dual processor) Module Size Used by snd_pcm_oss 46201 0

Any help would be appreciated as I am a novice trying to work around a difficult situation. This is what the zaprtc helpfile says: zaprtc, getting zaptel timing out of your realtime clock ======================================================== Make sure that you _dont_ have rtc support compiled into your kernel! INSTALL: make USE: make load REMOVE: make unload I interpreted this as

Hi, I don't have a zaptel device for conferencing. I read from the lists, that ztdummy and zaprtc need to be installed to get conferencing. I could able to compile successfully with ztdummy and when i receive the call it says, -- Goto (13732,s,1) -- Executing MeetMe("SIP/-08118800", "1234") in new stack == Parsing

I originally built my Asterisk server without installing the Zaptel package as it was going to be a purely SIP based system. However when I went to setup conferencing using meetme I found out that app_meetme is dependant on the ztdummy for timing. I have now installed the zaptel package and I believe the ztdummy module is loading ok [root@astro asterisk-1.4.0-beta2]# lsmod Module

Any thoughts on the following? I am running asterisk from CVS (downloaded yesterday's version, just to be sure) on a test system with no digium cards in it, so I have installed ztdummy (see logs and screenshots below) as a timing source. When I call the music on hold extension from a Sipura Sip connected analog phone, I hear nothing and start getting Warning[98310]: chan_sip.c:674

Hello all, I really appreciate the replies I've gotten about this so far (especially the support for wanting to run it on Solaris!). The core issue seems to have been missed, though -- is there any way to run a complete Asterisk solution on Solaris 10 (including music-on-hold and conferencing)? This probably comes down to a few issues: - Is ztdummy (a component of Zaptel) *really*

Kristian, I have 2 X100P cards but neither work on my Compaq DL360 G2. The system will not even boot! Take a look at my initial post and let me know if you have any other advice. Regardless, thanks for your post! ------------------------------------------------------------------------ - I need a timing device for the DL360G2 for conferencing and meetme. For a timing device I have 2 X100P cards

I am interested to learn if I need to have ztdummy installed if I do not have any zaptel hardware in my machine? I have found a lot of references with RTP problems which were related to RTP timing (or lack of it). My problem is that voice coming from SIP hardware is OK, but voice going from asterisk to SIP hardware is choppy, full of noise or completely cut-off. Am I going to solve my problem

I have an asterisk box with no zap hardware in it. I use the ztdummy for music on hold. However, the music is very distorted. I rmmod ztdummy, and the Music sounds great. Michael

Hi there I am currently using Asterisk with Meetme on a 2.4 linux kernel. I am using Ztdummy with usb-uhci driver for timing. It seems to work ok, although I haven't tried it with more than 5 users. However, I am now looking to move into a production environment and some people have said that it is better to have a Zaptel card. I would be installing Asterisk on a 2.6 linux kernel for the

Hi, Just need to check somthing.. Am I correct in saying that conferencing does not work on a system that does not have a Digium board installed?? Thanks.. -- ______________________________________________ http://www.linuxmail.org/ Now with e-mail forwarding for only US$5.95/yr Powered by Outblaze

This is not directly * related, but could be. My company is using a VoIP conferencing solution that is suffering from developer neglect. I've considered trying to leverage *, and our internal developers can build the management interfaces. If that plan is not accepted by management, I need to find a commercial solution that works. Requirements: H.323 SIP G7.11/G7.29 Multiple unique

Hi, I've managed to build the zaptel modules including ztdummy; ztdummy is installing fine in the modules list and the relevant device structures are present. lsmod | grep ztdummy gives:- ztdummy 5160 0 zaptel 186916 1 ztdummy rtc 12372 1 ztdummy Where I'm stuck is I am now at a loss as to how to configure my /etc/zaptel.conf and

Hi to everybody, seems that I cannot load the zaptel modules: ztdummy says the following: [root@Hayabusa misc]# modprobe ztdummy /lib/modules/2.4.22/misc/ztdummy.o: unresolved symbol zt_unregister /lib/modules/2.4.22/misc/ztdummy.o: unresolved symbol zt_transmit /lib/modules/2.4.22/misc/ztdummy.o: unresolved symbol zt_receive /lib/modules/2.4.22/misc/ztdummy.o: unresolved symbol zt_register

Hello list I'm having some trouble getting * to recognize ztdummy on a new install (Fedora Core 3). I installed the module, and it shows up when I do an 'lsmod': Module Size Used by ztdummy 3796 0 zaptel 206852 1 ztdummy crc_ccitt 2113 1 zaptel I did 'service start zaptel' and everything appears cool.

Hi all, I have a problem starting the ztdummy. Here is what happens: [root@asterisk /]# modprobe ztdummy Notice: Configuration file is /etc/zaptel.conf line 0: Unable to open master device '/dev/zap/ctl' 1 error(s) detected FATAL: Error running install command for ztdummy After this, ztdummy is visible with lsmod, but when I try MeetMe, I get following: == Parsing

Hi, I need to run ztdummy for Paging, but now that this is all become dahdi I don`t really know where to start. I did build dahdi before building asterisk, but that`s it. I find it hard to find any documentation referring to dadhi instead of zaptel. I have no Digium hardware, but I still need the ztdummy timer (or whatever it`s called now). How do I get myself going? Regards,

I previously had Asterisk 1.0.7 running on a Linux 2.4.x kernel with ztdummy. I was able to do things like meetme and music on hold. I recently installed Asterisk 1.0.9 on a different machine with a Linux 2.6.x kernel running ztdummy. I installed and configured everything the same way, but when I try to call into a conference room I get the error message stating, "that is not a valid