similar to: Incoming CallerID management

I'm using happily this cheap phones, but I still have a little problem. Configuring the phone is extremely easy on * and I've a couple of them perfectly working, except when i try to call some toll-free number (in italy 800xxxxxxx ). If the number called is an IVR system, often with GrandStream (but also with Cisco 7905.h323) it's impossible to make the menu choices via the Dialpad.

I need to configure an * box to connect to a primary * box which is attached to a PRI in order to make calls using both the same E1 connection. I know the best solution is to use IAX (altough i could connect the IP phones on the remote site directly to the main * box that is VPNed with the remote one). I've some doubt on how to config IAX to work in this situation. I think that: On the

Hi For a customer, I am trying to setup 3 different companies on one asterisk box, and I need to assign extension 200 in three different companies. I was using different contexts, but was unable to get it to work. So, my basic question is - In Asterisk, Can we have same extension number in different contexts? For example: [Context_company_1] exten => 200,1,,,

I have a new Asterisk system going into production next week and I'm a bit stumped as to the best way to handle the Dialplans for it. The Asterisk system is replacing 4 separate PSTN lines with both SIP & PSTN inputs. The setting up of the dial plan is giving me some design headaches, which probably means I'm missing something obvious and doing this the hard way. I have separate

Hi Folks I have had a look through the Features list, and I see that the system does support an auto attendant, however is it possible to have say 5 telephone numbers that a person would dial and have 5 different messages I.e Dial 555-1121 and you get a message for companyA call centre Dial 555-1131 and you get a message for companyB call centre Dial 555-1141 and you get a message for companyC

If I have a global variable in my dialplan and I change it, does that change immediately take affect for all calls that are active? Here is my situation. The company I work for has two office groups that share a building. The two offices are separate companies but support one another and want to be able to transfer calls as if they were all on the same phone system. Each company has 4

We are running our * server as a virtual PBX for 6 companies. I am having all of the Allison prompts plus our own custom IVR prompts being re-recorded for each company, in a different voice (marketing thing) with a different personality (perky, corporate, earthy) . I'm curious if someone could point out a dirty trick to get the voice to play right, for internal and external callers,

I've to project and build a fresh new box with * on. Basically, i'll have this situation: The office is connected to the phone carrier with a PRI. I need to let users continue to use their analog phones in a office, and an IP-phone based solution on the remote office, that will call using outside using the PRI on the first one. PRI---> Asterisk ---> Analog phones |

After a long working evening yesterday, now my * box place and receive calls with H323,SIP and ISDN line. Calling from the office to an outside line, happens: - If I call a mobile number and the called answers, all goes ok - If I call a number at home/office, and it's answered , all goes ok - If I call a toll-free number with an IVR system, nothing happens: it continues to ring indefinitely

Greetings. Today I've installed a fresh new E100P on a EuroISDN PRI. It seems to work well, accepting calls, but, when I start *, I have the screen flooded with this message: PRI got event: 8 (or 6) If i look into /var/log/asterisk/messages i've this Error: File chan_zap.c, Line 5341 (zt_pri_error): PRI: Read on 35 failed: Unknown error 500 Repeated indefinitely. Also, i've a

Is there any way to run asterisk without a fxo card? I am looking only run SIP and a single fxs card.

I've got a need to do something like the following: [foo-context] exten => _.,1,SetCIDNum(123) exten => _.,2,SetCIDName(XYZ) include => local include => tollfree But of course, this example won't work. The goal here is this: if a call ends up being handled by the "local" or "tollfree" contexts, I want those SetCID*** commands executed. Otherwise, I

Can I configure Samba4 in such a way that I have two separate **forests** on a single machine? let?s say one for CompanyA and other for companyB? So essentially does Samba4 support multiple server instances like Samba3 as described here http://wiki.samba.org/index.php/Multiple_Server_Instances? If it does not yet, are there any known blockers in supporting this or it?s just a question of time

I'm using Asterisk 1.0.9, a Digium TE210P dual T1 card, and two Rhino channel banks (one 12FXO/12FXS, the other 24 FXS). So it's an analog phone on the inside connected to one of the FXS ports, and PSTN line connected to one of the FXO ports. My problem is that as soon as I hear the _first_ ring when I dial out through the PSTN line, I hear a tiny echo on the phone (I estimate between

Hello, I'm trying to understand why when I make a call from a SIP phone to an external number who has an IVR system in which I've to choose some options using the dialpad, it does'nt recognise the key pressed and remains still waiting for my choose. I'm tryng using Grandstream 102, and i've tryed with all the 3 modes possibile: Dtmf inband, rfc2833 and INFO (obviously

I need help creating a channel for my phone device (Quicknet PhoneJack). I have installed and loaded the driver and phone devices listen in /dev (phone0 - phone15). [phone.conf] mode=dialtone format=slinear device => /dev/phone0 fxoks=2 ;Quicknet PhoneJack [extensions.conf] ... exten=>_NXXNXXXXXX,1,Dial,Phone/phone0 ... When I try to make a call, I get the following output: Executing

Hi all, I was wondering if there is a function kind of similar that splits a dataframe, applies a function to each row and returns in a data frame. I know ddply but this one isn?t useful in this situation. I have a dataframe with values for each day (rows) for different objects (columns). I have values for several years. Now, I want to do calculations on only the data of that year. With the

Hello all, i'm experiencing a list of unpredictables hangup on SIP phones using a PRI E100P Card. All i can see in logs is " WARNING[81931]: File chan_zap.c, Line 5402 (zt_pri_error): PRI: Read on 37 failed: Unknown error 500" I receive a lot of these errors in asterisk/messages. It doesn't seem to be strictly linked to hangups, since i have dozen of these messages per

Hi everybody, Firstly I'm going to describe the scenario where I'm working. I use a E400P with Asterisk CVS-05/22/03-11:14:50, and I'm working with asterisk trow AGI scripts (Perl). The configuration of extension.conf is: exten =>_s,1,Answer exten =>_s,2,AGI,script.agi Inside the AGI script is call Dial application as follows: print "EXEC Dial

Hi evereybody, I'm trying to use musiconhold during dial tones. But I only can call earing dial tones instead of music. Now will see my configuration files. AGI File(using AGI script to EXEC DIAL) print "EXEC Dial Zap/g2/numberc||m\"; $res=checkresult(); Extension.conf exten =>_numberb,1,Answer exten =>_numberb,2,SetMusicOnHold,default exten =>_numberb,3,AGI,dial.agi