similar to: Using OH323 and Gatekeeper

Hello I am a newbie to Asterisk. We have set up Asterisk on a PC with Redhat 9.0. We have installed H323 openphone on our PC's. We are wondering what a gatekeeper does. It seems we need one but what I have seen in this group is that a gatekeeper must be installed on another box on the network. As all our PC's on the network use Microsoft OS is there a free gatekeeper software for

Use oh323. Download the openh323 and pwlib tarballs from openh323.org Follow Jeremy's instructions in the /asterisk/channels/h323/ directory EXACTLY! good luck Regards, Sean Langley, P.Eng Firmware Engineer General Dynamics Canada (403)730-1482 sean.langley@gdcanada.com > -----Original Message----- > From: Senad Jordanovic [mailto:senad@cwcom.net] > Sent: Friday, September 12,

Hello All, I am trying to setup a SIP to H323 system using SER, Asterisk And GnuGK. Following is the configuration: CISCO ATA (NAT) -> SER -> ASTERISK -> GNUGK My Cisco ATA is registered with SER and When I dial a number, SER forwards the call to Asterisk, and Asterisk forwards the call to the GateKeper. This is ok, call reaches the gatekeeper, however the gatekeeper drops the call

Is anyone using the subject phone without the proprietary call setup equipment? How do you configure this phone to use the * pbx? I am hoping to go out and buy a couple of phones but the dealer here says I need to spend another $15K or so for the call manager equipment. Regards, Sean Langley, P.Eng Firmware Engineer General Dynamics Canada (403)730-1482 sean.langley@gdcanada.com

Hello every one, I have got a H323 gatekeeper for testing. The informations are something like this: account code: test01 gk ip address:192.168.10.12 I don't know how to set it in the h323.conf or oh323.conf, I have tried it for almost one day but I always got the error. Help me please. Regards. -------------- next part -------------- An HTML attachment was scrubbed... URL:

All - NEED HELP BADLY.. Using Asterisk with H323 Channels.. Everything is installed but we cannot register w/ Lucent gatekeeper. We ran ethereal and found that it was making GRQ (Gatekeeper discovery requests).. We had provided the name of the Gatekeeper (it's IP) and cannot determine why it's trying to do a GRQ. We want it to go straight into RRQ or ARQ and skip the GRQ.. Netmeeting does

I have tried everything. to register with this gatekeeper to make and receive calls These are the details I received from the voip provider: protocol H.323 Gatekeeper Address - AVS@210.21.118.XXX Port - 1719 RAS - 53 Q931 - 80 h245 - 1722 RTP - 1722 Username - H323 I have 2 phone number/accounts with this gatekeeper that I need to register to. ID - HMA0200.10szxn-xxxx e.164 - 22xx2912

Hi, I've oh323 chan installed and working to make calls from SIP to H323 devices. The problem is can no hear sound with the H323 device. I think this is some related with codecs o nat, because the H323 have one public IP from a different subnet from the asterisk box. If I use netmeeting in gateway mode, the call can be completed and I can talk with a SIP device, but in gateway mode I can not

Dear friends, I have compiled and installed h.323 in my asterisk. And I have a service from a H.323 VoIP provider who give me user, password and gatekeeper IP address. All configured. But when I start my asterisk i receive the following error and h.323 calls can not be making and/or receiving. [chan_h323.so]=> (The NuFone Network's Open H.323 Channel Driver) == Parsing

During debugging of H323 trunk side (using Jeremy Macnamara's H323 driver in ~/channels/h323) a couple of things come don't quite work as advertised... 1/ the following line in extensions.conf explicitly sets the outgoing caller ID (required in my case for downstream GK processing..) exten => _1NX.,1,SetCallerID,6400047602100 exten => _1NX.,2,Dial,H323/${EXTEN:1} what

Hi all! Please I need someone that have already done an H.323 - SIP gateway to help me with some problems. I can stablish calls from a SIP telephone to a H.323, but I can't do vice versa... (problems with port 1719- when the gatekeeper tries to contact with asterisk at this port, it is unrecheable...). Please someone can help me? Regards, Mireia

Hello everybody, I?ve been pulling my hair for a week now over a problem, and I really don?t know where to look anymore. Here?s my setup: There is an Innovaphone IP3000 VoIP gateway on the LAN (10.253.30.254). I can use it to send and receive calls from physical phones attached to it. I have setup Asterisk 1.0.3, with H323 and openH323, and on the same server I also setup GnuGK (10.253.30.1). I

I'm trying to configure Chan_H323 to register with GnuGK... without success... i've failed finding sample configurations. I'd greatly appreciate anyone who can provide sample config of H323.conf and gnugk.ini I am tyring to configure Asterisk as a neighbor in GnuGK. I'm always getting this error on Asterisk. ERROR[16384]: chan_h323.c:1987 load_module: Gatekeeper registration

Hello, i want to use asterisk as a gateway for H323-Phones. But i cant get it work. I'm using a gatekeeper on another computer. My IP-phone is registered there. Does anybody can sent me an oh323.conf and extension.conf as examples? Thanks in advance Erik Bastian -- NEU : GMX Internet.FreeDSL Ab sofort DSL-Tarif ohne Grundgebühr: http://www.gmx.net/dsl

Dear All, I have installed GNU gatekeeper in my machine. I tested the calls using gatekeeper successfully. Now I have tried to Disable the gatekeeper in oh323.conf file gatekeeper=DISABLE Now I have tried to call, but the connection is not established. I have got following warning message in console. " WARNING[8446]: chan_oh323.c:3555

Hello everybody, First time installer and I need the lists advice. My plan is to use asterisk PBX with some hardware to terminate my calls coming from several operational gnugk gatekeepers. Do have RH9 and downloaded the latest asterisk from CVS. Compiled according instructions and is running fine. Could hardly find any info on h323 implementation untill the REAME in the channels directory.

Folks! I would appreciate if someone could send me a simple working h323 configuration file oh323.conf that is part of asterisk@home installation. I have tried to use the oh323.conf content listed on WIKI but it is just not working as my H323 endpoint ( PA168 based ATCOM Phone) cannot register. I need a working example of this file for similar phone. Seshu

Hi all, i have big problems to make a h323 call over the gatekeeper from my provider. The provider demanded following account data: H323 ID: XXX-XXX-XX-X DetinationNumer: XXXXXXXXXXX I have configured the oh323.conf following: gatekeeper=XX.XX.XXX.XXX alias=XXX-XXX-XX-X Isx the alias equal to the h323id ? And how i have to make a call with the dial app ? I have following config: exten

Is H323 built into the current CVS? If so, could someone give me an idea of a simple config? thanks, darran -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20030429/fffec1d1/attachment.htm

Hi all, I try to ask helps again about chan_h323 extensions. I define this in h323.conf: [general] port = 1720 bindaddr = 0.0.0.0 allow=gsm allow=ulaw gatekeeper = DISABLE context=default [gm1] type=friend host=192.168.1.20 context=default [gm2] type=friend host=192.168.1.25 context=default and I have in extensions.conf : [demo]