Hi,
This is what I have and is working just fine. I disabled Asterisk gatekeeper
and registered directly to a Cisco CallManager 3.3.4 via h323 trunk.
;
; Configuration file of OpenH323 channel driver
;
;-----------------------------------------
; General configuration options
; (ports, jitter, GK, ...)
;-----------------------------------------
[general]
;
; Address to bind to for incoming connections.
; Default is ALL.
;
listenAddress=0.0.0.0
; Port to listen to.
; Default value is 1720.
;
listenPort=1720
;
; Port to connect to.
; (Used only when we don't have a gatekeeper)
; Default value is 1720.
;
connectPort=1720
;
; Configure TCP port range to be used by H.323
;
tcpStart=10000
tcpEnd=20000
;
; Configure UDP port range to be used by H.323
; Note: The port range used by RTP are configured from
; "rtp.conf"
;
udpStart=10000
udpEnd=20000
;
; Enable fast start (yes,no).
;
fastStart=no
;
; Enable H.245 tunnelling (yes,no).
;
h245Tunnelling=no
;
; Enable early H.245 messages in call SETUP message.
;
h245inSetup=no
;
; Enable in-band-DTMF detection.
; (Note: Netmeeting uses in-band DTMFs)
;
inBandDTMF=no
;
; Enable silence suppression.
;
silenceSuppression=no
;
; Set jitter buffer (in milliseconds, 20...10000).
;
jitterMin=20
jitterMax=100
;
; Set IP Type-of-Service byte for RTP channels.
; Valid values for this option are:
; lowdelay, throughput, reliability, mincost, none
;
ipTos=none
;
; Set the maximum number of inbound/outbound/simultaneous
; H.323 connections.
;
outboundMax=10
inboundMax=10
simultaneousMax=10
;
; Set the bandwidth limit for H.323 connections.
; The value is in Kbps.
;
bandwidthLimit=1024
;
; Set tracing options for the wrapper library and for the
; OpenH323 library.
; libTraceFile can be 'stdout' or a full path name to the tracefile.
; Only trace info for OpenH323 is logged in libTraceFile.
;
wrapLibTraceLevel=3
libTraceLevel=3
libTraceFile=/root/h323.log
;
; Disable gatekeeper or specify a gatekeeper.
; Valid values for this option are:
; DISABLE,
; DISCOVER,
; <gatekeeper's DNS name>,
; <gatekeeper's ip>,
; GKID:<gatekeeper's id>
;
;gatekeeper=192.168.2.2
gatekeeper=DISABLE
AllowGKRouted=yes
;
; Set the gatekeeper password
;
;gatekeeperPassword=secret
;
; Set the gatekeeper registration timeout
;
gatekeeperTTL=600
;
; Set the mode for sending user-input
; Valid values for this option are:
; Q931 - Q.931 Keypad Information Element
; STRING - H.245 string
; TONE - H.245 tone
; RFC2833 - RFC2833
;
userInputMode=TONE
;
; AMA flags (default, omit, billing, documentation)
;
amaFlags=default
;
; Account code
;
accountCode=H323
;
; Set the default context of H.323 calls.
;
;context=voip-h323
context=from-pstn
;-----------------------------------------
; Configure H.323 aliases, prefixes and
; related ASTERISK's contexts
;-----------------------------------------
[register]
;
; Aliases/prefixes associated with the default context
; defined in section [general].
;
alias=asterisk
alias=123
;
; Aliases/prefixes routed in "all-aliases" context.
;
context=all-aliases
alias=ASTERISK
alias=666
;
; Aliases/prefixes routed in "more-aliases" context.
;
context=more-aliases
alias=665
;
; Aliases/prefixes routed in "all-prefixes" context.
;
context=all-prefixes
gwprefix=00
gwprefix=01
;
; Aliases/prefixes routed in "more-stuff" context.
;
;context=from-pstn
;alias=fax
;gwprefix=14002
;-----------------------------------------
; Specify and configure CODEC related
; options
;-----------------------------------------
[codecs]
;
; Define the codec list of the channel driver.
; Every "codec" option may have a "frames" option
; associated with it.
; Valid values for the "codec" option are:
; G711U - G.711 u-Law
; G711A - G.711 A-Law
; G7231 - G.723.1(6.3k)
; G72316K3 - G.723.1(6.3k)
; G72315K3 - G.723.1(5.3k)
; G7231A6K3 - G.723.1A(6.3k)
; G7231A6K3 - G.723.1A(6.3k)
; G726 - G.726(32k)
; G72616K - G.726(16k)
; G72624K - G.726(24k)
; G72632K - G.726(32k)
; G72640K - G.726(40k)
; G728 - G.728
; G729 - G.729
; G729A - G.729A
; G729B - G.729B
; G729AB - G.729AB
; GSM0610 - GSM 0610
; MSGSM - Microsoft GSM Audio Capability
; LPC10 - LPC-10
; Number of frames in RTP packet (if not specified) is 1.
;
codec=G711A
frames=20
;codec=G711U
;frames=20
;codec=GSM0610
;frames=4
;codec=G7231
;frames=2
;codec=G729
;frames=2
-----Original Message-----
From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Kanuri, Seshu
(Company IT)
Sent: Wednesday, July 27, 2005 4:40 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [Asterisk-Users] H323 Configuration file
Folks!
I would appreciate if someone could send me a simple working h323
configuration file oh323.conf that is part of asterisk@home installation.
I have tried to use the oh323.conf content listed on WIKI but it is just not
working as my H323 endpoint ( PA168 based ATCOM Phone) cannot register. I
need a working example of this file for similar phone.
Seshu
--------------------------------------------------------
NOTICE: If received in error, please destroy and notify sender. Sender does
not waive confidentiality or privilege, and use is prohibited.
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users