Use oh323. Download the openh323 and pwlib tarballs from openh323.org Follow Jeremy's instructions in the /asterisk/channels/h323/ directory EXACTLY! good luck Regards, Sean Langley, P.Eng Firmware Engineer General Dynamics Canada (403)730-1482 sean.langley@gdcanada.com> -----Original Message----- > From: Senad Jordanovic [mailto:senad@cwcom.net] > Sent: Friday, September 12, 2003 8:18 AM > To: asterisk-users@lists.digium.com > Subject: [Asterisk-Users] h323 v oh323 > > > I have been reading archive post in regards to h323 support, > and I am not > clear on this: > > 1. > Is h323 enabled and ready to use if one compiles asterisk, > zaptel and libpri > (as shown on asterisk.org) ? > > 2. > If it is, is it h323 or oh323? > > 3. > If it is not, does one just need to follow instructions in > /asterisk/channels/h323/ > in order to get it enabled. > > 4. > I have an Ericsson webswitch 100 G4 (4 FXO ports). Once h323 is > enabled/configured > in *, WHY there is no any authentication needed on Ericsson > box for placing > the calls? > I presume, that when Ericsson, "assigns" LAN IPs, that only > those boxes can > communicate with it? > Is that correct? > > > Thanks > > > Senad > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users >
why not h323? Andrea Langley, Sean wrote:> Use oh323. > > Download the openh323 and pwlib tarballs from openh323.org > > Follow Jeremy's instructions in the /asterisk/channels/h323/ directory EXACTLY! > > good luck > > Regards, > > Sean Langley, P.Eng > Firmware Engineer > General Dynamics Canada > (403)730-1482 > sean.langley@gdcanada.com > > > >>-----Original Message----- >>From: Senad Jordanovic [mailto:senad@cwcom.net] >>Sent: Friday, September 12, 2003 8:18 AM >>To: asterisk-users@lists.digium.com >>Subject: [Asterisk-Users] h323 v oh323 >> >> >>I have been reading archive post in regards to h323 support, >>and I am not >>clear on this: >> >>1. >>Is h323 enabled and ready to use if one compiles asterisk, >>zaptel and libpri >>(as shown on asterisk.org) ? >> >>2. >>If it is, is it h323 or oh323? >> >>3. >>If it is not, does one just need to follow instructions in >>/asterisk/channels/h323/ >>in order to get it enabled. >> >>4. >>I have an Ericsson webswitch 100 G4 (4 FXO ports). Once h323 is >>enabled/configured >>in *, WHY there is no any authentication needed on Ericsson >>box for placing >>the calls? >>I presume, that when Ericsson, "assigns" LAN IPs, that only >>those boxes can >>communicate with it? >>Is that correct? >> >> >>Thanks >> >> >>Senad >> >>_______________________________________________ >>Asterisk-Users mailing list >>Asterisk-Users@lists.digium.com >>http://lists.digium.com/mailman/listinfo/asterisk-users >> > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > >
Langley, Sean wrote:>Use oh323. > > >um no, its H323.>Download the openh323 and pwlib tarballs from openh323.org > >Follow Jeremy's instructions in the /asterisk/channels/h323/ directory EXACTLY! > >OH323 is that third party driver that is out there. You cannot follow directions for H323 and expect OH323 to work. Jeremy McNamara
cheers, and Thanks Senad -----Original Message----- From: asterisk-users-admin@lists.digium.com [mailto:asterisk-users-admin@lists.digium.com]On Behalf Of Tilghman Lesher Sent: 13 September 2003 23:41 To: asterisk-users@lists.digium.com Subject: Re: [Asterisk-Users] h323 v oh323 On Saturday 13 September 2003 17:31, Senad Jordanovic wrote:> Any knows a link where to download: > > Open H323 v1.11.7 > and > PWLib v1.4.11http://www.openh323.org/bin/ -Tilghman _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users