similar to: retrieving dialed number when overlap dialing?

Hi, I am lost trying to figure out how to enable overlap dialing for calls coming in and coing out on a pri span. DISA looked promising at first, but does not seem to support overlap dialing. Just picking up a call by and trying to dial out does not seem the way to do it either. I tried: [dialincontext] exten => 12341234,1,Goto(dialoutcontext,s,1) [dialoutcontext] exten => s,1,Wait,1

Did anybody figure out how to make dial detect a busy on a zaptel channel on a pri interface when using overlap dialing? According to the documentation dial should return to priority n+101, if the called party is found to be busy. I can see a DISCONNECT message with "user busy" coming from the network when I turn on pri debugging, but the dial application does not seem to notice.

Did anybody ever come across an affordable, residential cable/dsl router with support for QoS? The ones I've seen so far (Netgear, D-Link and W-Linx) do not seem to support it. I noticed that even email can damage a G.711 stream on an 128kbit uplink, leave alone file-sharing applications. I understand this is strictly related to *, but nevertheless of interest to many of us. Thilo

I am trying to setup an extension in asterisk which dials an extension on the NEC DSX. i.e. If an asterisk user dials 402 I want it to connect to the NEC DSX @ 192.168.1.57 and connect to extension 402. ( 404 would be the NEC DSX sip account that I have the credentials for ). [402] deny=0.0.0.0/0.0.0.0 secret=pass1 dtmfmode=rfc2833 canreinvite=no context=from-internal host=dynamic type=friend

[ZapRAS triggering a kernel panic] >> Kernel panic: Aiee, killing interrupt handler! >> In interrupt handler - not syncing >> HDLC Receiver overrun on Channel Tor2/0/2/25 (master: Tor2/0/2/25) > > Hrm, I haven't seen this before. Please contact me off-list and I'll > give you more debugging instructions that may be helpful, as well as > enquire additionally

Hi, I've got an important question: I use an E100P directly connected to PSTN, but it does not *really* work as it should be: exten => 1000,1,Dial(Zap/1/1234) BUT: It does NOT dial "1234" but it says in debug mode: -- Called 1/72976451 Apr 26 00:53:00 WARNING[10251]: chan_zap.c:5979 zt_pri_error: PRI: !! Facility message shorter than 14 bytes -- Channel 1, span 1 got

Nevermind. Figured this out. I needed the following in extensions.conf to enable outbound dial. exten => _9.,1,Dial(Zap/2/${EXTEN:1},70,Tt) Thanks -----Original Message----- From: Info [mailto:info@psgsite.com] Sent: Tuesday, August 17, 2004 9:27 AM To: 'asterisk-users@lists.digium.com' Subject: RE: dialing out Thanks to Greg Hill for pointing me to the 'sip debug on'

Thanks to Greg Hill for pointing me to the 'sip debug on' cmd that helped me resolve the sip connection problem! The other issue I'm trying to resolve is configuring outgoing calls. I need to configure outgoing calls to use the FXO card in the PBX (zaptel device) via sip connected ip phones when a user dials 9. I need to support local and long distance dialing. Below is an excerpt of

ser forwards a sip message with extension 99999996 to asterisk which plays my 'userisoffline' message and hangs up and should stop here but instead asterisk continues to process the match everything extension ._ and dials out which is not what I want... if I change the starting priority of the Dial app to a higher level than 3 asterisk stops after the hangup but then doesn't accept

Hello, I'm using asterisk 1.0.7. with a somewhat advanced setup with IAX and CAPI as channels. A call comes in via IAX2 and should be redirected to CAPI. So I wrote the following dialplan: [fromiax] exten => _8XXX,1,Answer exten => _8XXX,2,Dial(CAPI/265:B${EXTEN:1},,r) [fromcapi] exten => 265,1,Answer exten => 265,2,Dial(IAX2/PoC/11@from-lw) exten => 265-BUSY,1,Busy exten

I see in the changelog that ENUM support has been added.. anyone know what this is? -- ______________________________________________ http://www.linuxmail.org/ Now with e-mail forwarding for only US$5.95/yr Powered by Outblaze

Hi, is there a way to enable dtmf detection on zap channels? I am trying to pickup, play a ringtone and the dial out. I.e. exten => s,1,Wait,1 exten => s,1,Answer exten => s,2,Playtones(dial) exten => s,3,DigitTimeout,5 exten => s,4,ResponseTimeout,10 exten => _X,1,StopPlaytones exten => _X,2,Dial,Zap/g8/BYEXTENSION|10

So I reached the point where my PRI is accepting incoming calls, but I cannot dialout. I must be doing something stupid, but I can't figure it out. The Asterisk box is sitting between the Mitel and the phone company, and has PRI lines to each. Asterisk was built from CVS r1-0 Log for a call from mitel heading outbound: ------------------------- -- Accepting call from '' to

Hello friends: I am facing cutoffs randomly when negotiating calls. The PBX dials the destination, the provider (softswitch) receives the request *[1]* and sudenly the PBX hangs up the call* [2]* while the provider is still dialing it, as a consequence the remote peer receives a ghost call. Along the atempt I could see six times a messages regarding NAT isuues *[3]* I hope anyone can give me an

An application I am running provides a dial tone to my users, read 9 digits, checks whether or not the called party number should be allowed and then dials out using overlap dialing on a pri channel. I.e. exten => _XXXXXXXXX,1,AGI(pm-check-destination.agi) exten => _XXXXXXXXX,2,Dial,Zap/g1/BYEXTENSION|60|CH The AGI-Skript takes about 0.3 to 0.5 seconds (it does a number of rather complex

Hi Dan, i did it wrong, sorry: curl -v -H "Content-Type: application/json" -u asterisk:asterisk -X POST " http://localhost:8088/ari/channels/newChannelId" <http://localhost:8088/ari/channels/1400609726.3/play?media=sound:hello-world> --data '{ "endpoint": "SIP/Alice", "variables": { "CALLERID(name)": "Alice" ,

The following strange conditions is happening while I try to dial a SIP user from another SIp user. SIP to Zap dialing is fine, as all 4 users can call PSTN. I'm using Asterisk SVN-branch-1.2-r51359M Example: extension 3210 calls extension 3213. They are all registered properly: chrom01*CLI> sip show peers Name/username Host Dyn Nat ACL Port Status 3213/3213

Hi, I have cvs updated all my modules (zapata, libpri, zaptel and asterisk). I have also read in the archives & seems that no-one has run into this problem. What I'm trying to do is simple. Just make and outbound call using the /var/spool/asterisk/outgoing directory. I copied /usr/src/asterisk/sample.call and only changed the context & extension. I configured my Zap1 to the same

[Apr 26 10:47:01] NOTICE[32151]: chan_sip.c:16223 sip_poke_noanswer: Peer '3516533812' is now UNREACHABLE! Last qualify: 86 [Apr 26 10:47:11] NOTICE[32151]: chan_sip.c:12723 handle_response_peerpoke: Peer '3516533812' is now Reachable. (98ms / 2000ms) [Apr 26 12:08:49] WARNING[32273]: app_dial.c:1242 dial_exec_full: Unable to create channel of type 'SIP' (cause 20 -

Hi asterisk users, I have a inssue with incoming calls with wcfxo card, while receiving a call, I?ve configured my dialplan to forward the call to all mi home voip extensions and that works just fine, but while in the call, after a few seconds, the pbx starts the simple switch once more and keeps ringing the voip extensions log as follows: