asterisk users - Jul 2003 - Busy detect on pri channel?

Did anybody figure out how to make dial detect a busy on a zaptel channel on a 
pri interface when using overlap dialing? According to the documentation dial 
should return to priority n+101, if the called party is found to be busy. I can 
see a DISCONNECT message with "user busy" coming from the network when
I turn on
pri debugging, but the dial application does not seem to notice. 

On a related issue: Is there a way of retriving isdn causes for the last call? I
think it would be very useful for a lot of applications to distinguish in 
between say "network congested", "number unallocated" and a
regular hangup.

Thilo

At 3:14 AM +0200 7/26/03, salmon@netzquadrat.de wrote:
>From: salmon@netzquadrat.de
>To: asterisk-users@lists.digium.com
>Subject: [Asterisk-Users] Busy detect on pri channel?
>Reply-To: asterisk-users@lists.digium.com
>Date: Sat, 26 Jul 2003 03:14:59 +0200 (CEST)
>
>Did anybody figure out how to make dial detect a busy on a zaptel channel on
a
>pri interface when using overlap dialing? According to the documentation
dial
>should return to priority n+101, if the called party is found to be 
>busy. I can
>see a DISCONNECT message with "user busy" coming from the network 
>when I turn on
>pri debugging, but the dial application does not seem to notice.
>
>On a related issue: Is there a way of retriving isdn causes for the 
>last call? I
>think it would be very useful for a lot of applications to distinguish in
>between say "network congested", "number unallocated"
and a regular hangup.
>
>Thilo
No, there is no way to tell how a Dial failed, which is getting to be 
a very large problem with overlap dialing, and cascading dialing in 
the various dialplans I assemble for my clients.

See my long-winded commentary:
    http://lists.digium.com/pipermail/asterisk-users/2003-April/009797.html

Method 2 is my favorite.  Note that this would not be a difficult 
feature to add, but it would be tedious since every type of channel 
would need to have every Dial exit area set the $RESULTCODE value. 
Perhaps I'll add that to the feature request list when I return from 
my trip...

JT