similar to: rxgain and txgain in zapata.conf

In trying to get the asterisk and faxing working I had to resolve to using iaxmodem and hylafax. I have incoming working, but outgoing the other fax rings but it would appear from web searches that the fax signals are too low to be "heard" I can read about rxgain and txgain for zapata. my fax setup goes direct from aterisk <-SIP-> SIP Provider <- Fax Machine -> It never

Hi, does anyone have test numbers in Germany that would allow me to tune my rxgain/txgain settings? I know there are numbers provided by other providers in UK e.g. but have yet failed to find a number in Germany (esp. by Deutsche Telekom). Kind regards, JP

I am trying to obtain optimum gain settings for a bank of analog lines connected to a channel bank. My telco has provided a 'Type 102' test line to use for incoming level calibration. This is functionally equivalent to app Milliwatt(), but provides tone from the CO inwards. Question is, how should one use this a 0dbm test source with ztmonitor? Am I correct in understanding that a 0dbm

Upgraded to Asterisk CVS-v1-0-12/23/04-18:34:44 and txgian / rxgain don't seem to work any more. Is this a know problem? I am using two X100P cards. -Thanks

I'm a bit confused on how to setup Zaptel.conf and Zapata.conf when there is a TDM400P and a TE410P installed after upgrade. The TDM400P has 2 FXS in position 1 & 2 and 1 FXO in the fourth position. I see boot, WCT4xxP loading first and WCFXS loading second. According to my understanding, given above, the TE410P should be configured first, then the TDM400P. However, I'm not sure

I currently have two channel groups in my zapata.conf file. I would like one group to be immediate=yes and the other immediate=no Does not seem to matter which way I go, the first entry in overrides my explicit setting for the second group. I am running * 1.0.9 on FC1 [trunkgroups] ;trunkgroup => 1,24 trunkgroup => 1,48,72 ;spanmap => 1,1,0 spanmap => 2,1,0 spanmap => 3,1,1

I am looking for docs on how to diagnose and adjust the rx/tx gain in zapata.conf. The wiki has a link to this article but it no longer exists on the server. http://lists.digium.com/pipermail/asterisk-users/2004-November/071301.html

Hello All This or similar topics have already been mentioned but without any solution yet. I have built a oneway conference system for a client using one caller's input and broadcast it to all the other participants using app_meetme. E.g. one talker multiple listeners. Unfortunately some of the talkers (I have got multiple rooms) are not loud enough (e.g. use just half the amplitude, so

Hi, I know that this issue has been discused guite a lot, but I haven't managed to get a definite answer. Is those two values supposed to be floats (e.g. 3.5) or integers with the percent symbol (e.g. 20%)? Thanks, Yiannis.

Do bristuffed zaptel (zaphfc) supporting rxgain/txgain in zapata.conf? I'm changing rxgain in zapata.conf, and reloading zaptel, but sound level on ISDN(HFC) is always the same (loud).

When I reload the config, I see this error in the CLI. However, I don't see what I have done wrong: == Parsing '/etc/asterisk/zapata.conf': Found May 30 16:38:42 WARNING[12630]: chan_zap.c:10088 setup_zap: Ignoring signalling -- Reconfigured channel 1, FXO Kewlstart signalling May 30 16:38:42 WARNING[12630]: chan_zap.c:10088 setup_zap: Ignoring signalling -- Reconfigured

Hi asterisk GURUs I have an issue with a call forwarding setup, I have the next zapata conf: -----------------zapata.conf----------------- [channels] context=incoming signalling=fxs_ks usecallerid=yes hidecallerid=no echocancel=yes echocancelwhenbridged=yes rxgain=0.0 txgain=0.0 channel=1 -----------------zapata.conf----------------- And in extensions.cof I have a

Hi gang. Just put an FXS port on a Zap interface for the first time. I can't figure out which parameters in zapata.conf are global and which ones can be channel specific & nested. I have mucked around with it but I can't seem to make any effect on the gain levels on a per channel basis. dring1context=pbx } dring1=0,0,0 } obviously global because it sets conditions for

I'm having a problem defining my channels Here is my zapata.conf ----------------------------------------------------------------------------------------------------- ; Zapata telephony interface ; ; Configuration file [channels] ; rxwink=300 ; Atlas seems to use long (250ms) winks usecallerid=yes hidecallerid=no callwaiting=yes callwaitingcallerid=yes threewaycalling=yes

I have echocancel=yes in zapata.conf but when I do a zap show channel 1, I notice echo cancellation is turned off. I followed the article that talks about the order in which the statements need to be in zapata.conf to get echo canceling to work: http://lists.digium.com/pipermail/asterisk-users/2005-June/110615.html But it is still not working. Does anyone know how to get echo

And I'll resend this one too. Silly scalix. --Rob -----Original Message----- From: Rob Thomas Sent: Thursday, 22 June 2006 12:19 AM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: RE: [Asterisk-Users] zapata.conf: recent changes? Looks like you've stopped compiling libpri. All those options that are being ignored, are being ignored because they're

hi! when i have busy signal on analog line (zap card) it doesn't detect that line is busy ? is it possible to change detected sequence (frequency) of busy tones on line (zapata.conf ??) tnx, Thomas my zapata.conf [channels] language=en context=lin1 signalling=fxs_ks channel => 1 group=1 echocancel=yes echocancelwhenbridged=yes rxgain=3.0 txgain=3.0 busydetect=yes

Hey everyone, I have been trying to figure this out and I am just getting no where with it. The office is using Polycom IP 601 phones. Everything sounds great in terms of quality on both heads. However, users of the phone are having trouble with their headsets and handsets. Some users are hearing their voices back come back on the phone. If they adjust their volume lower, then it goes away,

I am finding that I have to increase the txgain in zapata.conf to 8 when my X101P is connected to my BT phone line, otherwise people can hardly hear me. This then gives echo issues. Do other people have the same problem on BT lines. I was wondering if I should give BT a call and get them to increase the gain on the line. Strange though as the rxgain is OK and I don't have this problem with

Has anyone got a sensible zaptel.conf and zapata.conf for 2 TDM400P's working with UK set-up. They're set-up with 7 analogue phones and 1 PSTN port. Currently zaptel.conf has fxoks=1-7 fxsks=8 loadzone=uk defaultzone=uk It's really zapata.conf that would be useful. Currently using the zaptel/asterisk that comes with Ubuntu (latest) which needed a bit of tweaking (1.2.16), but could