Hi gang. Just put an FXS port on a Zap interface for the first time. I can't figure out which parameters in zapata.conf are global and which ones can be channel specific & nested. I have mucked around with it but I can't seem to make any effect on the gain levels on a per channel basis. dring1context=pbx } dring1=0,0,0 } obviously global because it sets conditions for dring2context=fax } all inbound calls dring2=387,321,0 } signalling=fxs_ks } is this the "lead" or should channel be the lead group=1 channel=1-2 rxgain=6 } can this go here to effect just chan 1-2? txgain=0 } signalling=fxo_ks group=2 mailbox=500 channel=3 rxgain=0 txgain=0 mailbox=0000 channel=4 rxgain=0 txgain=0 Thanks, dbc. -- David Cook (Canada)