similar to: ISDN Fritz & RedHat 8.0

Hi, I successfully installed 2 avm card in my asterisk box but I'm unable to make call. My capi.conf is: msn=0721111,07211115 incomingmsn=* controller=1,2 softdtmf=1 context=default echocancel=yes callgroup=1 devices=2,2 my capi info : Contr1: 2 B channels total, 2 B channels free. Contr2: 2 B channels total, 2 B channels free. my extensions.conf : exten =>

Hi * Fans, I have some fritz cards now, followed instructions from stuart hirsts email of Jun 28: -> Thanks for your info but I think I have it working at last. Below are the steps I took which might help others. 1) Download the PCI AVM drivers from ftp://ftp.avm.de/cardware 2) Download the Chan_capi from http://www.junghanns.net/asterisk/ 3) tar -xvzf fcpci-suse8.0-03.09.10.tar.gz which

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Not strictly Asterisk related, but I'm trying to get an AVM Fritz! card to work with Asterisk on a Fedora Core 3 box. I've grabbed the official AVM Fritz CAPI driver from the AVM website and compiled against the current kernel. However, as soon as I modprobe it I get: CAPI Subsystem Rev 1.1.2.8 fcpci: module license 'Proprietary'

HI all, Has anyone succesfully installed an AVM Fritz! card on Fedora 7 using the drivers at ATrpms recently? http://atrpms.net/dist/f7/fcpci/ I tried with a clean F7 build on my EPIA 5000 yesterday, after modifying /etc/capi.conf (removing the coment # in front of fcpci line) I received the following error when executing 'capiinit' - FATAL: Error inserting fcpci

Hello, I have problem with capi, I can't install it. I have putted all info what I did and what I get :). I think you can suggest me how to solve this problem.and thanking you in anticipation. I have ISDN Frtiz!Card PCI v2.1and I want to install it to my ubuntu box (kernel: 2.6.17-10-server). Using command "lspci -vv" , I can see that kernel finds this card: *02:0d.0 Network

A plea to all! Has anyone had any success with two or more avm fritz pci cards with either misdn, chan_misdn, or chan_capi, and any version of linux 2.6.x? I have managed to get misdn to load under 2.6.13 and detect two cards using misdn-capi and chan-capi (using capiinfo and capi info under asterisk) - but the second card/controller doesn't answer or dial calls. But if I try misdn

Hello everyone, I have been using an AVM Fritz! card with chan_capi and mISDN for quite a while in PTM mode and it was working finely. Now, I needed more DID/MSN, so I switched to PTP. But now nothing works anymore :( I am using Asterisk on Debian Sarge stable and installed Asterisk along with chan_capi from apt-get. I installed mISDN from the CVS of isdn4linux.de. It is : - Asterisk

Hi list, i'm keen to move to Asterisk 1.6, so really need to update my system which is running Mandrake 9.2 although it has been solid for years, fo Fedora 8. I have a Fritz! card for ISDN BRI, I have installed the drivers/kernel drivers from ATrpms (http://dl.atrpms.net/all/fcpci-03.11.07-14.fc8.i386.rpm and http://dl.atrpms.net/all/fcpci-kmdl-2.6.23.14-115.fc8PAE-03.11.07-14.fc8.i686.rpm)

Hello List! I have this "simple" problem: fileserver:/usr/src# capiinit start modprobe: Can't locate module kernelcapi ERROR: cannot load module kernelcapi Although, i think i hav everything build in, and loaded: ~# grep -i capi linux-2.4.27/.config CONFIG_ISDN_CAPI=y CONFIG_ISDN_CAPI_MIDDLEWARE=y CONFIG_ISDN_CAPI_CAPI20=y CONFIG_ISDN_CAPI_CAPIFS_BOOL=y

I've put my fire proof suit on ready to ask a question ;o) Redhat 9 Kernel 2.4.20-8 AVM Fritz PCI Problem 1... i have followed instructions from:- http://www.voip-info.org/wiki-Asterisk+AVM+Fritz+CAPI+Driver+Install http://www.voip-info.org/wiki-Asterisk+How+to+connect+with+CAPI (Plus many many other sites found via google over the last 16 hours) after modifying the makefile & defs.h,

Hi, First, here is my config: Kernel version 2.4.25 on a Fedora distro, Asterisk and a Fritz! Isdn PCI Card (v2). I try to make the CAPI drivers deal with Asterisk but I can't try to figure out to get of this issue. As I see, Fritz modules are integrated with the kernel, so I directly loaded the 'hisax_fcpcipnp' module from it. I install also Capi modules by downloading archives of the

Hi again! > I have excellent success with the tiny "fcpci" and chan_capi, which is > also working great with capi4hylafax. See > net-dialup/fcpci-0.1-r1 in gentoo (should not be difficult to use this > on other distros, but I have never done so). Do not confuse this with > the "fritzcapi"! I managed to install fcpci and it seems to run fine (capiinfo

Hi Everyone, Long time reader, first time poster. FINALLY got my First AVM Fritz Card up and running under Centos 3.4 Installed the second....modified the drivers etc as per the instructions found at the wiki System boots Modprobe capi all good modprobe fcpci all good modprobe f2pci the kernel then goes into Panic If Modprobe f2pci before fcpci the kernel still goes into panic.

I tried that but it still doesn't work... I think I don't have the correct approach. Have I to install any ISDN drivers (=modules ?) BEFORE dealing with CAPI ? If yes, why shouldn't I use the hisax drivers (which are kernel ones) instead of fcpci drivers (which doesn't seems to work, by the way...) And finally, how is it possible to link the two modules together? As you can see,

All, I have been trying to get CAPI4Linux working on my machine and being frank am failing miserably! I am looking for any help available, I am real newbie (so please be gentle) and choose to run Mandrake 9.2 as it appears quite friendly (or so I thought!). I have been following the guidance found at http://www.voip-info.org/wiki-Asterisk+How+to+connect+with+CAPI for the AVM card (actually I

Hi List, I am experiencing an issue in a server that I have installed asterisk; configured an AVM FRITZ card to work with the capi module. Once istalled the card works perfect; however every time I reboot the machine I found that I have to re install the capi4k-utils before I can load asterisk otherwise the capi module will not loadup. Can anyone direct me in the right direction in order to

Hello, Has anybody installed 2 Fritz pci cards in an asterisk box ? I can't make them work : each card is working fine when installed alone (with chan_capi), but I get a kernel freeze when doing 'insmod' with both cards installed. I am using Mandrake 10.1 with kernel 2.6, so the hack described at http://www.quiss.org/caiviar/Two-Fritzcards-HOWTO cannot be used (the hack requires

Someone have info about install an AVM fritz into FC3 ? I'm getting problems with kernelcapi, after succesfully installed the fcpci support. Thanks -- Adri? Vidal adriavidal@gmail.com Mail is better with 1Gmail

I am going to try and use a passive AVM fritz BRI card for my * setup.. Here is the thing.. I need to order my BRI from BT.. The service that looks to be the one to use is what they call ISDN 2e becasue this has the option to setup hunt groups across multiple ISDN2e lines so I could add another line later to get 4 channels.. According to the BT website in order to use the hunt grouping across

Hi everyone, I have Asterisk SVN-trunk-r7498 running for a few months and I'm quite happy with it. However, I am experiencing a quality issue with my AVM Fritz!card PCI which is used with chan_capi. When somebody calls me on this line he hears a lot of noise and I hear "scratches" and "plops". It is very annoying. Below is is my /etc/asterisk/capi.conf I've tried to