similar to: Nortel 350

I have a question hoping someone can help me with. I just purchased a 350 from http://lktelecom.zoovy.com/product/HPT350. I have been reading some posts and heard that these phones won't work with Asterisk.. Is this true? I had a previous Nortel Phone working in this enviroment. Well anyway here's my problem. The phone keeps ringing.. It won't stop.. Which makes the phone

I am working with the telantek.adsi file, and I was wondering how I would create a softkey for Transfer. I tried making a key definition and using SENDDTMF "#", but that didn't work. Is there another way I could do this? Also, does anybody have any ADSI scripts for use with Asterisk that they would like to share? Thank you for your time. __________________________________ Do you

I know I heard people looking for inexpensive ADSI phones a while back. Can't vouch for these guys, but this looks like a reasonable deal for what perhaps are new phones. No experience with ADSI, myself, but thought I'd pass it along. These folks also carry the Nortel analog units that do intercom and 2-line, as has been discussed in prior threads. JT ---------------------

Since Colin Anderson -- in a previous thread -- asked the question about whether ADSI was dead, I thought it was worth discussing. We've been using Nortel Vista 350s in our office up until now. The phones are from Telus, I don't know if there's any way to unlock them. It would appear Telus hasn't done much in the way of updating software for these phones; or if they have, they

I just need to buy 5-6 ADSI Phones. I wondering which of these models to choose - aastra 390 - I don't know is this an ADSI phone at all. Is there versions with and without ADSI - aastra 350 - I'm sure that it have ADSI. If there is some other good working model, it will be great, if someone points me. Thanks

Hi All, I know, IAX is NAT friendly, but... I have a problem running gnophone from a box behind NAT firewall. I can register gnophone with * through NAT, but when I try to make a call it instantly disconnects. CLI iax show peers command tells me that peer is unreachable. However this peer is registred. Gnophone also tells me that it is registred. It seems that registration handshake has

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I've searched the mailing list quite extensively, but didn't come up with anything promising (some things wer helpful, though). Does anyone know if Nortel M Series (specifically the 2008, 2616, 7208, and 7310) phones can be made to work with the TDM400P card or if they are ADSI compatible at all? I kind of doubt they will work if they are

What is the state of speex support in asterisk? I saw the codec seems to be there. Can speex be used on IAX2 links? Is there much work still to be done? many thanks, --J.

Hi, Not sure if anyone will be intersted but I have put together an install guide for Asterisk on RedHat 9.. Its nothing special but it may be of use to the newbies.. Like me.. If you would like a copy let me know and I will send it to you.. later.. -- ______________________________________________ http://www.linuxmail.org/ Now with e-mail forwarding for only US$5.95/yr Powered by Outblaze

We are currently working to trunk from a Nortel 81C to an Asterisk Server 1.4 running on Red Hat Linux. We have two PRI trunks which work with the exception of the clock slips, which is causing the Nortel to reset the PRIs once a hour. Thanks for any suggestions. 81C MSDL Asterisk Digium TE110P REQ prt TYPE adan dch 10

Hi Everyone, I've been in contact with a few members off list about this, and I still can't figure out what to do (aside from buying a more current ADSI compatibile screenphone). The problem is that I have a Locked Nortel Vista-350 phone and I cannot update the ADSI scripts. I have used the reset time/date trick, and then was able to partially upload the ADSI information to the

Hi, After spending some time trying to get a DG-104S working behind NAT, I finally found the problem. I made the incorrect assumption that nat=yes in mgcp.conf works just like sip.conf. The channels within a gateway are treated more closely to zap channels than sip channels (from a .conf standpoint). What this means is that you have to put nat=yes BEFORE any subchannel definitions: This

What kind of channelbank/FXS port are you connecting to? I've seen problems connecting to some of the older versions of the Adtran Total Access 750's. I wouldn't doubt there would be problems on other channelbanks with older firmwares. Of course, no firmware on CAC AB1's I have the AAstra 480, Adtran 750 Channelbank (updated firmware), T100P card, and it worked fine on the

I recently set up Asterisk with an Adtran TA750. All is well except the phones do not show the MWI. I have configured zapata.conf properly, as all phones will receive a stutter dial tone if there is a message waiting in it's assigned mailbox. Does anybody know how I might fix this problem? Thank you for your time __________________________________ Do you Yahoo!? Yahoo! SiteBuilder - Free,

I have ADSI working on my Aastra (Vista/Nortel) 350 phone and everything is working fine. However, I want the asterisk.adsi to load into the 'self-load' slot but can't figure out what the correct FDN for doing this is. Does anyone know the right FDN for the SL slot on these phones? Also, does anyone have any cool/interesting ADSI scripts they wouldn't mind sharing? I'm

I have a linejack and a phone jack in my asterisk server working well between the SIP phones and the phonejack. what I cannot get to work is the outbound linejack Phone/phone0 trunk line? how can I get a SIP or Phone/phone1 phonejack phone to dial 9 then outside number and pickup Phone/phone0 and dial it? right now it accepts a 95551212 but busy's on the last digit 2. no outside dial.

I have just received a T100P and an Adtran TSU 600 in the mail. I seem to be having a problem with the T100P card. So far I have done the following: vi zaptel.conf fxoks=1-22 fxsks=23-24 ... vi zapata.conf ... signalling=fxo_ks ... channel => 1-22 ... signalling=fxs_ks ... channel => 23-24 I then run modprobe zaptel modprobe wct1xxp ztcfg -vv There are no errors to report. In

Greetings, I have just purchased several Astra 390 phones ready for asterisk. I have placed a line with adsi=yes in the Zapata.conf file just before channel => 13 I have also added an extension exten => 6199,1,ADSIProg(asterisk.adsi) exten => 6199,2,Hangup in the extensions.conf file. When I try to program the phone I get the following: Asterisk CVS-03/28/04-12:02:10,

I'm sure there must be a setting I'm missing somewhere, so I thought I might was well ask here. Conversations are punctuated by sudden replacement of a given syllable or so of conversation with a DTMF tone. I would hope perhaps there's some kind of setting that has to do with the way it detects inband DTMF? I'm pretty sure it's an artifact of this particular ATA; my

I wonder if anyone out there has a perspective on this. There are a welter of tickets out there on the matter, most of them closed. This problem began for me over a year ago, and continues up to the latest versions I've installed (1.6.2.13). It happens randomly, and the suggestion on one of the bug tracker tickets that it is instigated by a small network leg looks to be on point to me,