similar to: g729 Codec

Hi, I have asterisk-0.4.0 running. When I make a call between an ATA186 and Asterisk using ulaw or alaw codec, all is fine. I installed the CVS version and tried the same thing but the voice is choppy. The installation was done on the same linux server. The stats on the ATA186 show no packet loss but a great number of "late packets". The stats when running version *-.0.4.0 do not

I have looked at the codec's available but I don't know how get the highest quality recorded message. If a user calls in over the normal telephone network is this limited to the carriers codec or the codec at the asterisk side? Would I get a higher quality result using VoIP rather than the normal network? Any help would be appreciated. Thanks Fats.

Hi, Does the G.729 module support adding more licences??

Hi, I am still toying with the idea of going ahead with using the G.729.. Can those using it tell me about some of your experiences using G.729.. Things like and problems you had running it, the voice quality and anything else you can think of... I have read in the archives that asterisk has to be run with -c.. Is this still the case? and if so does this mean that * can't be run using the

Checking the earlier mails, it stated that the phones were $75 (100) & $85 (102) ref :- http://lists.digium.com/pipermail/asterisk-users/2003-June/013483.html Well, I just called Ovislink/dgtimes and was quoted $90 & $100 and the person said there was no price change. Anyone on this list actually bought them at the $75 & $85 rate ??? Regards...Martin -- Too much is just enough.

Hi, I am thinking about getting some of these phones to use with my Asterisk system.. So I would be interested to hear from the people who have tired and tested these phones.. What is the voice quality like using alaw/ulaw or G.729?? Are there any problems getting them to play nicely with Asterisk?? How sturdy is the construction (reciever, handset, buttons, cable connections, etc..) ?? How

well .. good news :) i've just put in txgain=1.0 rxgain=1.0 in my zapata.conf and upgraded the Grandstream Budgettones i'm using to version 81 of the software and all seems fine .. there is still an echo but after the first couple of seconds of call it vanishes, as the echocancelling kicks in .. so far my client is happy :) now .. i have one slight problem left .. although most of my

Hi, I have just got my SNOM 200 to start doing some real testing with *.. I am trying to use the GSM codec but the quality is really bad, Is that normal? does anyone actually use GSM?? Also are there any 'gotcha's' that I need to look out for so I don't spend hours trying to get somthing working that really doesn't work anyway.. Thanks.. later.. --

OK I did some researches and tests with it, and finally: I registered my messenger to the asterisk and called if from the snom. The audio from the snom to the messenger was PERFECT. By the time of the call This message was running on the asterisk console: WARNING[16400]: File dsp.c, Line 1107 (ast_dsp_process): Unable to detect process 2 frames My conclusion is that the snom100 utilizes MSGSM

I found a thread [1] last month about the poor/crappy g729 quality on Sipura units. Anyone noticed an improvement or the quality is still poor? If the Sipura firmware/g729 offers no quality yet, who else is offering a dual channel g729 ATA? I heard about Uniden, but I have no "reports" about their ATA... [1] Sipura g729 call quality to PSTN

We are evaluating starting a small VoIP consumer based platform. What is the best codec to use with customers using primarily DSL as internet connectivity? I know that g729 is the king-all, but I want to know what the rest of the professional are using out there. g729 has a cost involved, so does the cost really offset the performance? Or is it better to go with g711 to start off? We plan

Hi, I installed s fresh system yesterday and it seems that zttool did not install!! ztcfg is there.. Anyone else had this problem or is it just me? -- ______________________________________________ http://www.linuxmail.org/ Now with e-mail forwarding for only US$5.95/yr Powered by Outblaze

I am going to try and use a passive AVM fritz BRI card for my * setup.. Here is the thing.. I need to order my BRI from BT.. The service that looks to be the one to use is what they call ISDN 2e becasue this has the option to setup hunt groups across multiple ISDN2e lines so I could add another line later to get 4 channels.. According to the BT website in order to use the hunt grouping across

My system seems to be generating a call on its own... Unfortuately I can't give much more information.. I have an X100P and an S100U.. My Modem and the X100P share a common line.. When I am on the internet (which is most of the day) * just sits there and does nothing (apart from when I am testing ideas for the dial plan), but at night when I am sleeping and the modem is not connected then

Hi, Quick question to all the electronics gurus out there.. I unpacked my second GS phone yesterday (had it for about a month!) and set it up.. This morning the power supply is dead.. I have looked for a new one online (In the UK using Maplin let me know if you know a better place.) becasue it would probbaly take too long to get one sent from China or the US and I need to get that station

Hi, Has anyone worked out a way to use Asterisk in a Hot Desk environment?? I have not been able to think of a way for the user to have control over which IP phone will ring when that users extension is dialed without the user needing to reconfigure the phone.. Something like this would be cool.. User dials *8555 (or similar) and is prompted to enter their extension and then password, after

Hi,. How can I make that Voicemail app to play only my own recorded message without the default one? Thanks, Dan

I have found a site that list the following (no date in the post, so it may be old): "since all transcoding and calls still go through one core in asterisk, it doesn't make sense to buy a multi-core or hyperthreaded system that will only slow you down" Does that still applies in asterisk 1.2.14/1.4.x ? Or do we have to tweak source code to balance loads (transcoding,etc) between

Hi all, Is there any alternative hardware components for multi port FXO cards, other than Single and E1 or T1 level? For example 4 or 8 port FXO card is ideal. Also the price matters. Thanks!

Hi.. How do you accept user input while waiting or playing moh? My Dialplan is as follows.. ring,ring,.. Hello thanks for calling blah blah... Please enter the extention number blah blah... WaitMusicOnHold(10) If no input pass call to operator.. The problem is that the user has to input the extension while they are being told what to do.. any input during Wait or WaitMusicOnHold is ignored...