similar to: capi + bri ?

Hello, I try to use Asterisk with an Eicon-card called "DIVA Server 4BRI-8M PCI" but I don?t get it to work. I?m running on RH8.0. The Eicon-card supports isdn4linux. In the modem.conf file i have put following: ----------- [interfaces] ; By default, incoming calls should come in on the "remote" context context=remote ; Modem Drivers to load driver=i4l ; Type of dialing

I have some problems with busy detection and SIP. When I'm making a phonecall (out or internal) and someone else is calling me, the phone (Snom200) is ringing and leaving the first caller (no difference if I call someone or if someone calling me) in the background waiting. It doesn?t hang up the first call but the second one is overriding the first. Is there anyone that has experienced the

Hello, Does anyone know how to set the outgoing CallerID properly when using Snom200/SIP/CAPI/BRI? Following doesn?t work: exten => _0.,1,SetCallerID,526910 exten => _0.,2,Dial,CAPI/526980:${EXTEN:1} Asterisk writes: *CLI> -- Executing SetCallerID("SIP/226-ada0", "526910") in new stack -- Executing Dial("SIP/226-ada0",

Hi, an attach() call turned out to be my problem (see below). Thanks everybody for the helpful comments. - Jan -------- Original Message -------- Subject: Re: [R] Memory leak in R v1.5.1? Date: Wed, 07 Aug 2002 01:12:09 -0400 From: Jan Meyer <janm at mit.edu> To: Peter Dalgaard BSA <p.dalgaard at biostat.ku.dk> References: <Pine.LNX.4.31.0208061713050.2645-100000 at

Hi, I am having trouble configuring CAPI so that call transfers work. I make a SIP call to asterisk which goes out on ISDn via CAPI. Then I try to do a transfer from the SIP phone which doesn't work and results in the call being disconnected. The error message given by asterisk is that it chan_capi can't find an entry for the outgoing msn for the transfer however the outgoing msn is the

Has anybody out there tried to use two different iconnecthere accounts with Asterisk? What I want to do is use a second account if the first is busy. I have tried the following: exten=>_91NXXNXXXXXX,1,StripMSD,1 exten=>_1NXXNXXXXXX,2,Dial,SIP/BYEXTENSION@iconnect ;iconnect is the first account exten=>_1NXXNXXXXXX,3,Dial,SIP/BYEXTENSION@iconnect2 ;iconnect2 is the second account But that

Hey I need another pair of eyes on this! I would like to add phones numbers to the blacklist from any handset so I did this: exten => _*66XXXXXXXXXX,1,StripMSD,3 exten => _XXXXXXXXXX,2,DBPut,blacklist/BYEXTENSION/1 exten => _XXXXXXXXXX,3,Hangup However what I get in the database is: /blacklist/BYEXTENSION : 1 And BYEXTENSION is not replaced with the actual number

When I place a call using Iconnecthere as my sip provider, I hear no ringback when making a call. Does anyone else have this problem or offer any suggestions? Thanks, Kevin -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20031003/b048f72f/attachment.htm

Hello-- I'd like to do a little processing on external phone numbers from within the asterisk pbx. Fairly simple stuff, but... devilishly hard to make it work so far! 1. I'd like to dial 9 to get an outside line. 2. If the number dialed after the 9 is 754XXXX, I'd like it to go thru unmodified. It's the only local number available here. 3. I'd like all 1 XXX XXX XXXX numbers

Hello, I am trying to configure asterisk 1.0.7pre to get incoming calls from an ISDN line using an AVM fritz PCI 2.0 with Chan_capi 0.3.5. My problem is that the context is not recognised in the /etc/asterisk/capi.conf I have in /etc/asterisk/capi.conf 's section "[interfaces]" the following directive context=isdn and the following directive in /etc/asterisk/extensions.conf in

Yo, Inspired by the example in the tips & tricks-section of "http://www.junghanns.net/asterisk/", I built a more elaborate call divert-feature. This one validates if the extension a call-forward is to be set to is actually valid for the current context and additionally saves this context into the DB and always uses it to originate the divert from, as you can't expect the

I'm having a bit of a problem here: I have a * box with a fritz isdn card (running capi 2.0 and chan_capi) and a x100p card for testing purposes. As a proof of concept, I wanted to be able to dial into the * using the isdn line, listen to a message, and enter a 3 digit extension number. If this happens, I wanted the * box to dial out using the x100p card, into our PBX (Nortel Meridian). If

Hi, I can't make outgoing calls with CAPI (passive ISDN Fritz card). See Asterisk error below. Incoming calls and SIP to SIP calls do work. It looks like a msn mismatch in extensions.conf and capi.conf, but I can't find it. Can anyone help me find the problem? Thanks, Rob *CLI> -- Executing Dial("SIP/8112-1be9", "CAPI/356666666:BYEXTENSION") in new stack

Hi all, * was running ... I have a WT405P and an AVM C4 with chan_capi 0.3.4a Today chan_capi stopped working, without any changings at the system. It seems, that not * is the reason, because isdn-log also shows no calls. If I try to call * from outside via capi, I only get a busy. That is the try from inside to outside: stern01*CLI> -- data = @89930:0107901723168212 -- capi

hi all, i have a probably very stupid question/problem. for testing purpose i am trying to get asterisk running with two isdn cards. I'd only like to here the demo sound when i call the number - but nothing works. The output of show channels is not showing any channel - should there be 4 channels ? - capi info shows my two cards perfectly. The ISDN Controller's are attached to an PTMP

Hi, I have an ansterisk and a cisco 827-4v registered to a Gatekeeper. asterisk has two extensions: exten => 223,1,Dial,OH323/BYEXTENSION@827PD exten => 730,1,Dial(IAX/eduardo@10.0.11.103) (IAX are working well) When I try to call each other, gnugk shows a ARJ: ARJ|10.0.11.112:1720|223:dialedDigits|730:dialedDigits|false|resourceUnavailable I think this could be a codec

Hi, i will use an AVM C2 controller with asterisk. How can i use both card ports ?? On the voip-info.org Wiki is only notice to: You will need a section for each controller in /etc/asterisk/capi.conf so the C2 will have 2 sections. But how is look like this ? Only on the first port is asterisk assume connections, but nothing on the second card port. In the dmesg is only the capidrv-1 shown,

http://sip.house.com.ar/operator Its a server/client combo that displays the status of your Asterisk PBX in a web browser in real time. You can also perform some actions. Hang-up channels and Transfers via drag and drop. The difference with other similar tools is that it displays status in real time (no refreshing necessary), and its graphically appealing. It's a work in progress... so

I have a Pitney Bowes (USPS Postage) machine that connects via a USB modem to fill it. It connects but soon disconnects. It works fine through a standard analog phone line not connected to asterisk. I also have the 'd' option on the Dial command. exten => _1NXXNXXXXXX,1,Dial,Zap/47/BYEXTENSION||d Any ideas? John

Hello, I would like to know whether there is a way to associate a TV media server with Asterisk. Is it possible to access TV Chanels in the Telephone Sets. Anybody have any tips or documents related to this please let me know. Thanks -------------- next part -------------- An HTML attachment was scrubbed... URL: