similar to: Which Hardware to buy for a simple * box

I'm using happily this cheap phones, but I still have a little problem. Configuring the phone is extremely easy on * and I've a couple of them perfectly working, except when i try to call some toll-free number (in italy 800xxxxxxx ). If the number called is an IVR system, often with GrandStream (but also with Cisco 7905.h323) it's impossible to make the menu choices via the Dialpad.

Greetings. Today I've installed a fresh new E100P on a EuroISDN PRI. It seems to work well, accepting calls, but, when I start *, I have the screen flooded with this message: PRI got event: 8 (or 6) If i look into /var/log/asterisk/messages i've this Error: File chan_zap.c, Line 5341 (zt_pri_error): PRI: Read on 35 failed: Unknown error 500 Repeated indefinitely. Also, i've a

Greetings, I need if possibile an explanation on how to manage the incoming callerid for an incoming call. Let me explain the situation: We have two different companies in this office that shares the same PBX (* box). Each company have its own number for the incoming calls. What i'd like to implement is something that, depending on the incoming line that is involved in the call, plays a

I need to configure an * box to connect to a primary * box which is attached to a PRI in order to make calls using both the same E1 connection. I know the best solution is to use IAX (altough i could connect the IP phones on the remote site directly to the main * box that is VPNed with the remote one). I've some doubt on how to config IAX to work in this situation. I think that: On the

After a long working evening yesterday, now my * box place and receive calls with H323,SIP and ISDN line. Calling from the office to an outside line, happens: - If I call a mobile number and the called answers, all goes ok - If I call a number at home/office, and it's answered , all goes ok - If I call a toll-free number with an IVR system, nothing happens: it continues to ring indefinitely

Hello all, i'm experiencing a list of unpredictables hangup on SIP phones using a PRI E100P Card. All i can see in logs is " WARNING[81931]: File chan_zap.c, Line 5402 (zt_pri_error): PRI: Read on 37 failed: Unknown error 500" I receive a lot of these errors in asterisk/messages. It doesn't seem to be strictly linked to hangups, since i have dozen of these messages per

Is there any way to run asterisk without a fxo card? I am looking only run SIP and a single fxs card.

Hello, I'm trying to understand why when I make a call from a SIP phone to an external number who has an IVR system in which I've to choose some options using the dialpad, it does'nt recognise the key pressed and remains still waiting for my choose. I'm tryng using Grandstream 102, and i've tryed with all the 3 modes possibile: Dtmf inband, rfc2833 and INFO (obviously

I need help creating a channel for my phone device (Quicknet PhoneJack). I have installed and loaded the driver and phone devices listen in /dev (phone0 - phone15). [phone.conf] mode=dialtone format=slinear device => /dev/phone0 fxoks=2 ;Quicknet PhoneJack [extensions.conf] ... exten=>_NXXNXXXXXX,1,Dial,Phone/phone0 ... When I try to make a call, I get the following output: Executing

We are a voip terminating company, we're using Channelbank with FXS modules, Rhino, CAC, etc.. What we're wondering is, is how to would you echo cancel a channelbank. Of course we're realizing that cancel'ing on the T1 (on Ast) does no good (we think?) because the analog conversion is at the channelbank. Suggestions? Lowering the gain helps but we're looking for a real solution

Hi! Is there anyone that are using a E1-channelbank and have any tips about some type? Im looking at the TE410P and use one port for a PRI (Euro-ISDN, I think we're using some slightly modified version here in Sweden, but I'll check that tomorrow) and connect one port to a channelbank for 30 analogue telephones. It would also be great to get callerid on the analogue phones, so it would

Hi All. I'm working on an * configuration. We require 8 inbound POTS lines, and CT1 or PRI seems like it will be quite expensive at that level. I've read that a T1 Channelbank plus the T100P would be a (the?) way to go for this situation. What is the recommended channelbank for use in this scenario? From searching the archives I see a lot of suggestions to get "a

Ok, the Zhone sucks and the Adtran 750/850 seems to be a little too expensive. Can anyone recommend a decent channelbank that won't break the bank? TIA, -- Troy Settle Pulaski Networks http://www.psknet.com 540.994.4254 ~ 866.477.5638 Pulaski Chamber 2002 Small Business Of The Year

hello, I am planning a fairly large hotel VoIP system, using analog phones. It will consist of about 100 analog phones, that must have access to a VoIP server. I am considering an option to use a couple of asterisk boxes, bundled with a total of four TDM2460E cards, and one TDM2451E card. Has anyone on this list done something similar? It would be great to hear some comments regarding a smilar

Hello ml, i need some help on my zaptel configuration. My E100P only shows some YELLOW / RED alarm when I load the wct1xxp module and do a cat /proc/zaptel/1 Span 1: WCT1/0 "Digium Wildcard E100P E1/PRA Card 0" HDB3/CCS YELLOW RED ... .. . My /etc/zaptel.conf is: span=1,1,0,ccs,hdb3 bchan=1-15,17-31 dchan=16 loadzone=nl defaultzone=nl I tried zaptel-1.0RC2 and the latest CVS

<P>hi Everyone,</P> <P>We are configuring an ISDN PRI E1 with an E100P card, when you load the drivers, and starts the asterisk, cards also starts fine, givin following output,</P> <P>*CLI> <BR>&nbsp; == D-Channel on span 1 up<BR>&nbsp;&nbsp;&nbsp; -- B-channel 1 successfully restarted on span 1<BR>&nbsp;&nbsp;&nbsp; --

Trying to find my feet here. If I wanted to connect Asterisk to a PRI and throw in a T1 Adtran channel bank into the mix for fax machines would the following work? Connect PRI line from telco to Port 1 on the Digium Wildcard TE205P. Connect Adtran TA-624-T1 to Post 2 on the Digium Wildcard TE205P also, would I need a crossover to the channelbank or is it a patch lead like the connection to the

Hi, i just received an E100P, this is the first one I have ever seen, and notice that the board reads T100P. Is this right ? The antistatic bag had a small label that has E100P written on it, and the card is a bit different than the T100P I already have, Does Digium use the same boards for both cards ? I don't have an E1 link here, can I test the card just by loading the driver and run

Hi- Perhaps someone with an E100P in hand can answer this: I just received an E100P from Digium (I normally buy quad boards) I noticed that the circuit board says "T100P" on it, and I assume that the T100P and E100P both use the same circuit board. Can someone please confirm that their E100P says "T100P" on the artwork? Thanks Scott Scott M. Stingel Emerging Voice

Hi all, We have been fighting with telco for a entire week. Today they came here with a LITE3000 to analyze what is going on. When I configure zaptel with no external clock, E1 gets aligned/synchronized with bit rate in 2048000 bps, both me and telco. span=4,0,0,ccs,hdb3,crc4 But when I configure span4 to get clock source from telco they become unsynchronized. TElco bit rate stays in