similar to: RE: Intel Corporation 82573V Gigabit Ethernet Controller

I am using centos 5 x86_64 AMD64 X2 4200+. I am current on yum update. My machine has two ethernet cards. e1000 (eth0) and forcedeth (eth1) [root at fsdsigns2 ~]# more /etc/modprobe.conf alias eth0 e1000 alias eth1 forcedeth sometimes on boot the forcedeth driver thinks it is eth0: [root at fsdsigns2 ~]# dmesg | grep eth forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.

Hello, Marvel Yukon Gigabit Ethernet is supported by CentOS ? -- -- Devel in Precio http://www.pas-world.com

Hi, I have CentOS4.1 up to date and I get on boot: ipw2200: Detected Intel PRO/Wireless 2915ABG Network Connection divert: allocating divert_blk for eth1 ipw2200: ipw-2.2-boot.fw load failed: Reason -2 ipw2200: Unable to load firmware: 0xFFFFFFFE divert: freeing divert_blk for eth1 ipw2200: failed to register network device ipw2200: probe of 0000:03:03.0 failed with error -5 My understanding

Hello all. I''ve upgraded my drives, and in doing so loaded FC8. Latest kernel-xen.x86_64 (2.6.21.7-5) and xen.x86_64 (3.1.2-5) available, using 2 Intel NICs with e1000 driver. All worked fine on FC5 with custom domU FC5 with pcifront and NIC drivers in kernel. Now, I''m unable to get the NICs to function inside my domU. The are visible in lspci, and ipconfig. DomU dmesg

Does anyone have some tips for setting up Broadcom's 802.3AD support or just getting their driver compiled / installed? First off, I noticed redhat claims the broadcom bcm5708 driver has been added to the rhel4 kernel. But I don't see /proc/net/nicinfo which broadcom claims the driver creates when it's successfully initialized. So, I'm trying to build the driver based on the

I have my Linux 2.6 kernel with the necessary HDLC config and also recompiled zaptel accordingly. On modprobe, I get: Found a Wildcard: Digium Wildcard T100P T1/PRI Debug: sleeping function called from invalid context at mm/slab.c:2000 in_atomic():0[expected: 0], irqs_disabled():1 [<0211e605>] __might_sleep+0x82/0x8c [<02144643>] kmem_cache_alloc+0x1d/0x57 [<42ad7a2c>]

Hello everybody, I''m experiencing some problems while exporting a whole usb hub to my DomU. My Dom0 is a Debian Etch using Xen 3.2 and kernel 2.6.18-5-xen-686 SMP on an intel core 2 duo. My DomU is a CentOs 5.1 using same kernel. Both are 32 bits environnements. I''ve exported my Usb Hub, and a ethernet card, using the pciback.hide=(04:00.0)(00:1d.0) option to Dom0 kernel. I

Hello all, I want to learn about requirements if I want to protect gigabit network with ipfilter as transparent firewall. Which type of hardware is required to install FreeBSD + ipf (as transparancy ) . We use 3 gigabit ethernet to protection which type of gigabit ethernet carts are powerfull. Also, what about the NMBCLUSTERS , IPSTATE_SIZE and IPSTATE_MAX in ip_state.h. I want to collect all

Hi all, I am notice strange behaviour of samba in our mixed fastEthernet/gigabitEthernet enviroment. First of all let me to describe our situation. We have a samba server running debian unstable with 2.6.3 kernel installed. Server has a gigabit copper connection (tg3 driver) to the 100/1000 Megabit switch (3COM 4228G). Client is a WinXP/Linux workstation connected by ordinary 100 Megabit

Dear Xen Users, I have a rhel5 dom0 machine with four nics, two public and two private. My goal is to run two xen instances, a fully virtualized rhel4(with a custom kernel, hence the fully virtualized) and a paravirtualized rhel5. Each instance will need one public and one private nic with gigabit connectivity. At the moment I''m simply bridging two nics to each instance. Is this the

Hello Xen users, I want to purchase some gigabit ethernet cards. Our local Fry''s is having a $5.99 special on Airlink gigabit PCI cards with the Realtek chipset. Any experiences with this chipset vis-a-vis xen that would preclude its use? Thanks for your advice, Mike Wright :m) _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com

Hello everyone. What's better for Asterisk: have 2 distinct 100Mb network cards in the system, one on the "internet" and one on the "local net" OR have one 1000Mb network card with 2 separate VLAN's set up? It's a difficult decision because 2 cards are using 2 IRQ's etc but a single 1000Mb card might generate more PCI interrupts and get me into different

Hi Folks, Is there any SIP FXS ATA with Gigabit ethernet bridge port, in the market ? -- Isamar Maia Cel. VIVO SSA: (55) 71-9940-2012 Cel. TIM SSA: (55) 71-9289-5128 Cel. Claro SSA: (55) 71-9146-8575 Fixo: (55) 71-4062-8688 Skype ID: isamar.maia "A vida ? muito curta para ser pequena" (Benjamin Disraeli) -------------- next part -------------- An HTML attachment was

Hello I am having a weird issue with a PCI-X Intel dual gigabit ethernet nic. While I am partially successful in pass thru with kvm, I have a weird issue with my pfsense freebsd vm. It see the two nics but gives them the same Mac address. I'm not sure if this is a pfsense bug or what. The nic works for everything but this Mac address issue. Long story short, I guess what I'm asking is

Hi list, Im having a problem with intel 82573L Gigabit Ethernet Controller. Centos 4.2 can't detect this internal ethernet port my motherboard is an Intel Desktop Board D945PSN. when i type lspci the ethernet is identified but when i type dmesg i can't see the ethernet port. -- Regards, Mark Quitoriano, CCNA Fan the flame... http://www.spreadfirefox.com/?q=user/register&r=19441

I can not disable the auto-negotiation (eth1) on my centos 6.2 via ethtool or /etc/sysconfig/network-scripts/ifcfg-eth1 the eth1 is a private network on a cheap gigabit-switch (under controll from a serverhoster). sometime the ethernet-card lost the "speed" and "duplex" information and change it to "unknown". i can only fix this with a network-restart (or

On 1/1/2015 9:41 PM, mechy2k2000 wrote: > Hello I am thinking of buying this card to and wanted to know if this NIC > is supported. The card is a Sun Microsystems PCI-X Quad-Port Gigabit > Ethernet Adapter QGEXPCI 501-6738-10. Can't find any info on how well the > card plays with centos and also proxmox ve (if any of you use that distro ) I've not tried that card on anything

Hi All, I am currently using Samba v3.0.14a and it's incredibly responsive...except when it comes to large files. Currently my specs are as follows: Santiago Dell PowerEdge SC1420, which is using SATA (RAID 5), and reiserfs 3.6 Ottawa: Desktop PC Windows XP 100/10 Ethernet Card. Douglas: Desktop PC Windows XP Gigabit Ethernet Card. These are the tests that I have performed: Test Set 1:

Do anyone have any experience using 10 Gigabit Ethernet connections with Samba? Specifically, if you have had such an experience, can you share what sorts of optimizations you made to get the maximum data transfer between server and workstation? I am just experimenting with this kind of setup myself and I see a huge GULF between the raw TCP/IP transfers that I can make between two

Hello I am thinking of buying this card to and wanted to know if this NIC is supported. The card is a Sun Microsystems PCI-X Quad-Port Gigabit Ethernet Adapter QGEXPCI 501-6738-10. Can't find any info on how well the card plays with centos and also proxmox ve (if any of you use that distro ) If things don't seem to work I may bite the bullet and buy an Intel card thanks Rafeal Stewart