similar to: [memdisk] remote booting diskless Mini-ITX system

Hi, I have a EPIA mini-itx board that I have been running Fedora 4 on. I want to install CentOS 4.4 on it since FC4 is no longer supported. The install goes fine but when I reboot the machine after the install I get errors like the following: hda:<4>hda: dma_timer_Expiry : dma status == 0x21 There are other errors about not being able to access the disk and eventually the kernel panics.

Can this MB be used with Centos 4 (or 5)? For reference: http://www.logicsupply.com/products/ms_9832 I don't think we can use this new MB since the Realtek 8111C does not seem to be supported (well) http://forums.tweaktown.com/f69/8111c-nic-revision-ep45-27089/ -- -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- -

Does anyone have recommendations for (or against) mini-ITX platforms to be used with Wildcard X100P and TDM400P cards? I am considering the use of systems using VIA EPIA CL and Epia M as small, quiet platforms on which to host Asterisk.

-------------- next part -------------- An embedded message was scrubbed... From: Steve Rodgers <hwstar at rodgers.sdcoxmail.com> Subject: Via Mini-itx anaconda install failure Date: Sat, 1 May 2004 14:31:43 -0700 Size: 849 URL: <http://lists.centos.org/pipermail/centos/attachments/20040501/e69b2948/attachment-0005.mht>

Le Lun 2 mars 2009 23:39, Jason Pyeron a ?crit : > Can this MB be used with Centos 4 (or 5)? > > For reference: > http://www.logicsupply.com/products/ms_9832 > > > I don't think we can use this new MB since the Realtek 8111C does not seem > to be > supported (well) > > http://forums.tweaktown.com/f69/8111c-nic-revision-ep45-27089- >

Hi Everyone, I'd be grateful if anyone can help with a couple of queries I have. Recently I downloaded Centos 3.3 and cannot get it to install I my system. The system I am using to install is a based on an original EPIA Mini-ITX m/board. At a certain point in installing it comes up with an error saying something like "system not supported". Can anyone advise if they have got

I've got Asterisk up and running on a VIA mini-itx M10K with a TDM-400 card but I'm having a terrible time with the sound setup. I tried RH9 and Debian distributions, with 2.4.18, 20, 22, 24 and 26 kernels. I've used the VIA drivers, ALSA drivers, OSS drivers and Kernel drivers with varying results. I can setup the audio to work with a few different applications, 2 channels and 6

> > JR Richardson wrote: > > > I?ve got Asterisk up and running on a VIA mini-itx M10K with a TDM-400 > > card but I?m having a terrible time with the sound setup. I tried RH9 > > and Debian distributions, with 2.4.18, 20, 22, 24 and 26 kernels. I?ve > > used the VIA drivers, ALSA drivers, OSS drivers and Kernel drivers > > with varying results. I can

I am looking into convising the boss to get me a mini-itx system to replace my workhorse notebook (I have to have a corp notebook and I can remote terminal into a Centos server from it). So I have been playing with one mini-itx system (the decTOP) and am looking at my options. I want a fast processor, 1Gb memory, LAN, 4USB, VGA. Wireless and bluetooth optional USB dongles along with a

I am trying to acheve pxe booting of a image of barts boot disk (www.nu2.nu). I have managed to get LTSP booting via pxelinux, so I know my dhcp/tftp servers are ok. However when I try to boot memdisk with either a stock suselinux boot image file (taken from SuSE 9.1) or my dos disk (created by dd if=/dev/fd0 of=/imagefile) I get output like MEMDISK 2.08 command line : BOOT_IMAGE=memdisk

Hello everyone, Does anyone out there have actual experience with running * on a mini-itx board from VIA? They look good, but I have some reserves because of VIA's problems with PCI latency in recent years (audio dropouts, wierd things happening). I am looking at the EPIA CL-10000. For $270, I can get a CL-10000 (1ghz C3, dual ethernets, etc), 256mb RAM, and a nice small (12 x 2 x 11)

All, wondering if you can help, I had a perfectly working Mandrake 9.2 box running on a via Mini ITX 5000/classic. Asterisk (zaptel and libpri) was built from CVS head around 22nd July 2005. I decided now was a good time to ghost it up....although humorous for you all suffice to say, I ended up with a partitionless box! Following the install script I had created I built an identical server to

Just to drag this thread on a bit further ... I've been looking into these little boxes, thinking I could use one as a firewall/gateway. My one requirement is that it would need to have two PCI slots (one can be low-profile), and although I've seen PCI riser cards that can give me two slots, they've been rare, and cases that are suitable (i.e have the space, and back panels are

i had such problems on my mini-ITX. when sharing irq's with video or sound card, network traffic during ogg playing (for example on nfs) or quick moving windows crashed the interface. ifconfig down/up resolved the problem. it has been solved for a while now (i couldn't reproduce this problem) i think. regards, OLivier Le Jeudi 12 D?cembre 2002 03:45, The Anarcat a ?crit : >

Powerful enough to run a small asterisk server though not sure if the drop down in size from a mini-atx or a micro-atx but I'm sure someone will try. http://www.geek.com/first-look-via-px10000-pico-itx-motherboard Regards, Dean Collins Cognation Pty Ltd dean at cognation.net <mailto:dean at cognation.net> +1-212-203-4357 Ph +61-2-9016-5642 (Sydney in-dial). --------------

Hi all! We have just released new updates for the yum channel of the open-sharedroot software for CentOS4 and CentOS5. With the open-sharedroot software package, you can build up a NFS or GFS based diskless sharedroot cluster with CentOS4 and CentOS5. It also contains a toolset to clone or backup entire diskless sharedroot clusters. Open Sharedroot homepage: http://open-sharedroot.org/

Hi. I followed the advises from yours but I still can't do tcp/ip from wfw when booting diskless. I was told to run the wsahdapp.exe file, but when I do it windows tells me : winsock api Instalation Error The DOS sockets TSR is not loaded and of course when I try to run netscape it tells me: Netscape was unable to create a network socket connection There may be insufficient system

Hi, I am working on the diskless booting over Infiniband networks. At the moment we have created and implemented architecture which allow diskless booting of Linux nodes on x86, x86_64 and Itanium platforms. The system works by booting first small custom made Linux kernel of the Infiniband adapter ROM. The kernel has enough of infiniband stack to setup TCP/IP networking over infiniband. Then it

A non-text attachment was scrubbed... Name: not available Type: text Size: 1566 bytes Desc: not available Url : http://lists.samba.org/archive/samba/attachments/19980607/c34143df/attachment.bat

Clary Harridge asked... > we are interested in booting Win95 diskless from a SAMBA server. Peter Debus <pdebus@turing.une.edu.au> cautioned | Unfortunately there is no other option I am aware of, other than booting | from an NT server - which I have been told, but have not experienced | myself, is painfully slow if booting a whole computer lab at once, with | clients timing out and