search for: zapatatelephoni

Whatever happened to the Zapatatelephony project? The last information there is from 2001 and a lot of new cards have been released since. Has GNU hardware development completely stopped?

?Hola! torisa.c (from zaptel 0.50) says: #define MASTERVAL 0x41 /* Enable E1 master clock on Rev. B board */ Does that mean that there is a torisa revB? If so, are the schematics downloadable from somewhere? (www.zapatatelephony.org only has Rev. A ones) Does the Rev. A support E1? (just changing the DS2151 for DS2153, the DS crystal and closing the E1 jumpers, or something else is

Hi, > While I was surfing the net last week, > I found a link for "open source" pci telco cards. > I'm not sure if it were isdn or analog related. > The layout an all the stuff was free downloadable, so that > you can build your own cards. > Does anybody have the link? you're probably talking about the Zapata Telephony Project and their

I have an old zapata tormenta 2 quad port pci card. I'd like to get it working and play with it but was curious to see if that was possible. Does anyone know if it will work for 2.6 kernels, or where I can find decent drivers? I tried getting the tor driver from http://www.zapatatelephony.org/linux-zapata-current/ installed, but didn't get very far. Any input is appreciated.

Any one know of software that allows 2-way radios as VoIP(SIP) clients, besides dingotel's usb & mic cable trick ? http://www.dingotel.com/2way/requirements2way.asp They might be ok if the SIP client was not hardcode to their own SIP proxy Has anyone tried any hacks to get the 2-way radio SIP client to regsiter to a * box. hmm chan_frsgmfrs anyone? using the usb/mic cable under linux :)

Hello,every one! I want to fabric a piece of Tormenta ISA E1 card for study. But the from http://www.zapatatelephony.org is all about Tormenta ISA T1 card. I want to know if they are using the same chips or something different bettween them. Thanks. john

Hi there, I was looking for a GSM gateway, but I didn't find any prices... Anybody knows how much one of these costs? And, is it possible to use an amateur radio with asterisk? Thanks, Marconi.

Pete VK2YX writes > I've been involved with IRLP for about 5 years and am one of the original > install team. I've gone through the emmotions of allowing "other" networks > connect to IRLP and I know its caused some lots of headache. > > As far as a closed network goes, yes there is LOTS of passion to keep it HAM > only and I'd have to support that notion.

Hi List, While I was surfing the net last week, I found a link for "open source" pci telco cards. I'm not sure if it were isdn or analog related. The layout an all the stuff was free downloadable, so that you can build your own cards. Does anybody have the link? Yes, I know there is google, but i searched for over an hour, but can't find anything. maybe i use the wrong

This is just curiosity, but I'm wondering why the Morsecode app has remained part of the trunk for all of these years. Is there any practical use for this or is it just an homage to the ghosts of telecommunications past? Does anybody use the Morsecode app for anything interesting? I'm strangely fascinated by this core piece of Asterisk functionality. -Chris

You don't need to reinvent anything to tie radios to *. Ham systems like IRLP, Echolink, eqso etc all have fairly tight controls to keep from being abused (although with a little Linux knowledge, the IRLP package can easily be used to set up your own network using their protocol). Jim Dixon seems to have done the work to integrate radios with * already. See

I wanted to see if there was anything reasonable in price out there yet that performed an RF to IP bridge via asterisk. What I mean by this is callers from PSTN can be patched to a UHF/VHF radio and vis-?-vis. I know there is an option available for the Avaya systems but it?s a little out of the price range I?m looking for (~$200/channel). Has anyone out there found a stable way to do this?

Hi, I'm looking into support for SS7 and I found an article (http://www.openss7.com/news13022002.html) which says that OpenSS7 supports Linux Support Inc's T400P-SS7 Quad T1 and E400P-SS7 Quad E1 PCI interface cards. It also says that Linux Support Inc is the primary sponsor of Asterisk. However I cannot find these cards on the Asterisk hardware page

Hello, I'd like to ask if there are any news about CE certification of the E1 boards. I know that the T1 boards are FCC certified but I'd also like to know what is the status for CE certification. Thanks for any input, Vlasis Hatzistavrou.

Hi everybody, I would like to decrease the load of my asterisk server. Could someone recommend me a solution? I have thought about a hardware component that would do some tasks as compression/decompression or codec translations but wonder if such a solution exist. Thanks for any suggestion Lamine

Hi All, The wiki seems to be struggling this evening. Anyone else seeing this? Michael -- Michael Graves mgraves@pixelpower.com Sr. Product Specialist www.pixelpower.com Pixel Power Inc. mgraves@mstvp.com o713-861-4005 o800-905-6412 c713-201-1262

zaptel compiles fine (make linux26) but when I modprobe ztdummy I get the follow error. [root@localhost zaptel]# modprobe ztdummy Notice: Configuration file is /etc/zaptel.conf line 0: Unable to open master device '/dev/zap/ctl' 1 error(s) detected FATAL: Error running install command for ztdummy System info: Linux localhost.localdomain 2.6.9-5.0.5.ELsmp #1 SMP Thu May 19 19:24:44

Hello, After poking and prodding at Asterisk and Zaptel for over a couple years now, I've dedicated some time to actually reading the code and trying to figure it out. It's been fascinating. With the driver source on one part of the screen and a pdf of "Linux Device Drivers" on another part I've aquainted myself with device driver programming and the interesting

Hi, all I have installed TDM400 with 1 FXS and 1 FXP ports. Now I am goig through documentation on how to configure it. It mentions 3 protocols: Loopstart, Groundstart and Koolstart. Which one do I use? Can someone send me sample zaptel.conf file for Australia? This will save me some time and will be used as a working example. Thanks, Rudolf