search for: wctdm24xxp

Hi list, I installed 2 HB8 cards each of them with a Quad Bri modules in a HP 360 G6 running Debian Squeeze. Here is an output of dmesg wafter server has booted: [ 9.784123] wctdm24xxp 0000:0b:08.0: PCI INT A -> GSI 31 (level, low) -> IRQ 31 [ 11.847073] bnx2: eth0 NIC Copper Link is Up, 1000 Mbps full duplex [ 11.847600] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 11.859589] wctdm24xxp 0000:0b:08.0: Timeout waiting for receive frame. [ 14.871333] wctdm24xx...

Hi, Before I report a bug on http://bugs.digium.com, I would like to know if someone is seeing the same error message. Personally I am not using wctdm24xxp but other modules such as wcte12xp and wctdm. The latter modules load fine and are compiled with pci_register_driver as expected. The only module that seems to require the deprecated function pci_module_init is wctdm24xxp. Is this normal? Thanks, Vieri _________________________________...

...;1 [2014-12-03 13:24:33] WARNING[31947] channel.c: Exceptionally long voice queue length queuing to Local/414 at from-internal-00000165;1 /var/log/messages shows a huge number of messages similar to the below at about an hour and a half before Asterisk finally hang up: Dec 3 12:30:14 pbx kernel: wctdm24xxp 0000:02:0c.0: Setting FXS hook state to 2 (04) framecount=333123791 Dec 3 12:30:14 pbx kernel: wctdm24xxp 0000:02:0c.0: SLIC_LF OK: card=3 shadow=64 lasttxhook=04 framecount=333123797 Dec 3 12:30:16 pbx kernel: wctdm24xxp 0000:02:0c.0: Setting FXS hook state to 1 (06) framecount=333125791 Dec 3...

...Subsystem: d161:8007 Flags: medium devsel, IRQ 22 I/O ports at d400 [size=256] Memory at fe5fe800 (32-bit, non-prefetchable) [size=1K] Expansion ROM at 20020000 [disabled] [size=128K] Capabilities: [c0] Power Management version 2 Kernel modules: wctdm24xxp # lsdahdi # modprobe wctdm24xxp # dahdi_genconf -v modules Default parameters from /etc/dahdi/genconf_parameters Generating /etc/dahdi/modules # cat modules # Autogenerated by /usr/sbin/dahdi_genconf (Dahdi::Config::Gen::Modules) on Fri Nov 26 12:02:11 2010 # If you edit this file and execute /usr...

Hi, I'm facing an issue with which loading wctdm24xxp module fails. Here is relevant dmesg's output : [ 13.455729] dahdi: Telephony Interface Registered on major 196 [ 13.455729] dahdi: Version: 2.4.0 [ 13.510847] ACPI: PCI Interrupt 0000:01:0b.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 15.527788] wctdm24xxp 0000:01:0b.0: Timeout wait...

I'm trying to configure a TDM808P card on debian. When I modprobe wctdm24xxp i get this error FATAL: Module wctdm24xxp not found. FATAL: Error running install command for wctdm24xxp I think i have successfully compiled the zaptel drivers, and the card appears when i do a lspci 02:06.0 Ethernet controller: Digium, Inc. Unknown device 0800 (rev 11) Subsystem: Digium...

...STER) fxsks=1-5 # Global data loadzone = us defaultzone = us *** dmesg output *** dahdi: Telephony Interface Registered on major 196 dahdi: Version: 2.3.0.1 PCI: Enabling device 0000:03:08.0 (0000 -> 0003) ACPI: PCI Interrupt 0000:03:08.0[A] -> GSI 19 (level, low) -> IRQ 177 wctdm24xxp 0000:03:08.0: Port 1: Installed -- AUTO FXO (FCC mode) wctdm24xxp 0000:03:08.0: Port 2: Installed -- AUTO FXO (FCC mode) wctdm24xxp 0000:03:08.0: Port 3: Installed -- AUTO FXO (FCC mode) wctdm24xxp 0000:03:08.0: Port 4: Installed -- AUTO FXO (FCC mode) wctdm24xxp 0000:03:08.0: Port 5: Installed --...

The Asterisk Development Team is pleased to announce the first release of DAHDI-Linux 2.6.0 and DAHDI-Tools 2.6.0. 2.6.0 is a feature release which: - Adds support for the TE820 8-span card to the wct4xxp driver. - Decrease load time of analog cards supported by the wctdm24xxp driver. - Adds sysfs object model to facilitate persistent span numbering and early loading of modules (NOTE: by default this release still behaves like previous releases with regards to span numbering assignment). - dahdi_pcap tool is now included in DAHDI-tools but not compi...

The Asterisk Development Team is pleased to announce the first release of DAHDI-Linux 2.6.0 and DAHDI-Tools 2.6.0. 2.6.0 is a feature release which: - Adds support for the TE820 8-span card to the wct4xxp driver. - Decrease load time of analog cards supported by the wctdm24xxp driver. - Adds sysfs object model to facilitate persistent span numbering and early loading of modules (NOTE: by default this release still behaves like previous releases with regards to span numbering assignment). - dahdi_pcap tool is now included in DAHDI-tools but not compi...

...nd then zaptel modules are loaded manually and so on. I have no problem with this boot routine and i've been tested all digium cards (expect tdm24) and they work fine till now. The problem appeared when i purchased the new TDM2400 card. after installing this new card system stopped on modprobe wctdm24xxp ot boot time! (randomly sleeping on "Resetting the modules.." / "During Resetting the modules..." and sometimes "After resetting the modules...) but no step further. Nothing happened till i killed modprobe manually so no modules detected on tdm24. (Port 1: Not Installed, .....

Hi, 1. Is there any manual entry about modprobe's options relative to a given Dahdi driver (wctdm24xxp, for instance) ? 2. When loading a wctdm24xxp driver, is there any parameter to pass to modprobe to configure a span in NT/point to point mode ? 3. After running dahdi_cfg -vvvvv , I can read with dmesg : [ 1986.289277] wctdm24xxp 0000:04:06.0: xhfc: Configuring port 0 span 1 in TE mode with ter...

...e following: /build/include/linux/modversions.h -DSTANDALONE_ZAPATA -I.. -o base.o -c base.c base.c:48:29: linux/workqueue.h: No such file or directory base.c:292: warning: `vpm150m_firmware' defined but not used make[2]: *** [base.o] Error 1 make[2]: Leaving directory `/usr/src/zaptel-1.4.5.1/wctdm24xxp' make[1]: *** [wctdm24xxp/wctdm24xxp.o] Error 2 make[1]: Leaving directory `/usr/src/zaptel-1.4.5.1' make: *** [all] Error 2 Can anybody help me with this? I run make distclean, configure and then make. Thanks.

....2.13) > box > but when I remove card from the PC after reboot Asterisk not started > correctly. > On box now with TDM Card I have: > > root at voip:~# lsmod > Module Size Used by > zaphfc 16796 6 > wctdm24xxp 63552 5 > zaptel 192132 26 zaphfc,wctdm24xxp > > The kernel version is: > 2.6.19.2 > > ..then I have in /etc/rc.d/rc.modules: > rc.modules > rc.modules-2.4.33.3 > > ..both files are identical: > > #!...

Hi gang, We are moving our computers from a cluster of physical machines to a VMWARE server with virtual machines. We investigated and are looking to replace our TDM400P/TDM410P with AEX410P cards. Can we run asterisk with the DAHDI drivers from one of the Virtual machines or is DAHDI going to have to be a native process on the "REAL" machine? Thanks Danny Nicholas

Good morning, I have a digium wctdm24xxp in my asterisk box, i am not able to see the callerid when the call is incoming from the fxo line, i live in Brazil, how can i change the signaling from fsk to dtmf? Thanks. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asteri...

When I compile dahdi I see these warnings: WARNING: "kasprintf" [dahdi-linux-2.5.0.2/drivers/dahdi/wctdm24xxp/wctdm24xxp.ko] undefined! WARNING: "kasprintf" [dahdi-linux-2.5.0.2/drivers/dahdi/dahdi.ko] undefined! And "modinfo dahdi" shows that the driver was built for a 2.6.17 kernel, SMP mod_unload 586 4KSTACKS gcc-4.1 If I "modprobe -a dahdi", I get the following in dmes...

...is release: DAHLIN-245: dahdi_dynamic slip issue with 2 or more TDMoE devices DAHLIN-248: Outgoing Natively Bridged Call Completely Locks the Box There is also a fix for the new 2FXS+6FXO modules on Astribank devices. The DAHDI-Linux short log from v2.5.0 is: Doug Bailey (1): wcte12xp, wctdm24xxp: Update VPMOCT032 firmware to 1.11.0. Wagner Gegler (1): dahdi_dynamic: Call dahdi_receive in rx packet handler. Russ Meyerriecks (1): wct4xxp: Bug in timing cable with different span density cards Shaun Ruffell (8): wctc4xxp, wcte12xp, wctdm24xxp: Remove chec...

...is release: DAHLIN-245: dahdi_dynamic slip issue with 2 or more TDMoE devices DAHLIN-248: Outgoing Natively Bridged Call Completely Locks the Box There is also a fix for the new 2FXS+6FXO modules on Astribank devices. The DAHDI-Linux short log from v2.5.0 is: Doug Bailey (1): wcte12xp, wctdm24xxp: Update VPMOCT032 firmware to 1.11.0. Wagner Gegler (1): dahdi_dynamic: Call dahdi_receive in rx packet handler. Russ Meyerriecks (1): wct4xxp: Bug in timing cable with different span density cards Shaun Ruffell (8): wctc4xxp, wcte12xp, wctdm24xxp: Remove chec...

...ng Linux on > 2012-03-27 00:53:01 UTC > io*CLI> dahdi show version > DAHDI Version: 2.6.0 Echo Canceller: HWEC, MG2 > > and this is my kernel info : > root at io:~# lsmod > Module Size Used by > dahdi_echocan_mg2 4691 4 > xpd_fxs 29178 0 > xpp 138396 1 xpd_fxs > wctdm24xxp 97993 2 > dahdi_voicebus 44395 1 wctdm24xxp > dahdi 192410 9 dahdi_echocan_mg2,xpd_fxs,xpp,wctdm24xxp,dahdi_voicebus > [...] > > root at io:~# uname -a > Linux io 2.6.33.4-smp #2 SMP Wed May 12 22:47:36 CDT 2010 i686 > Intel(R) Pentium(R) 4 CPU 2.60GHz GenuineIntel GNU/Linux &...

Quick and dirty question: for the TDM410P I must use the wctdm24xxp driver? Att Vin?cius Fontes Desenvolvimento Canall Tecnologia em Comunica??es Ltda.