Thanks for answer. ?Devices PAP2 and SPA3000 works good and use FSK for
VMWI and CallerID, so I think TDM410P should also works. ?CallerID works
good. ?So issue should be in source code of VMWI.
Best regard.
Mathieu Therrien, VE2TMQ / VA2IO
B. Sc. A. Genie Logiciel
www.ve2tmq.ca
VoIP: sip:*99730 at sipbroker.com iNUM: +883-5100-099-01841
PSTN: +1-514-316-9498
PGP id : 0xA2882612
PGP FingerPrint : FC7C 9D8A 11BE 7C0E C95B 1D2A E372 338C A288 2612
> On 04/04/2012 04:48 PM, Alec Davis wrote:
>> The TDM410P doesn't support 'hvac', only the obsolete
TDM400P supports that
>> option was for the old phones that have a neon light (or equivalent
>> LED+ZENER ciruit).
>>
>> Are other phones off the TDM410P (other than the VTECH) working, or is
the
>> Vtech the only model with VMWI available to you.
>>
>> I'm not able to check at the moment, I have copied the
asterisk-users list,
>> someone else may have had the same problem.
>>
>> Alec
>>
>>
>>> -----Original Message-----
>>> From: ve2tmq at gmail.com [mailto:ve2tmq at gmail.com] On Behalf Of
>>> Mathieu Therrien
>>> Sent: Thursday, 5 April 2012 7:21 a.m.
>>> To: sivad.a at paradise.net.nz
>>> Subject: Fwd: issue with Digium TDM410P
>>>
>>> Hi I have issue with my Digium TDM400 card, all working good
>>> except VMWI on phones connected on FXS ports.
>>> I user with regular analog phone VTECH 5.6 GHz. I am unable
>>> to activate VMWI. It's a red flashing LED on phone with
>>> message display "MESSAGE WAITING".
>>>
>>> With PAP2 it works good, but now I tried lot config, but none
>>> works good.
>>>
>>> I try lot configs, and search on forum and wiki of Asterisk
>>> and Digium.
>>>
>>> Could you help my with it, please?
>>>
>>> Best regard.
>>>
>>>
>>>
>>>
>>>
>>> folloing my config.
>>>
>>> chan_dahdi.conf
>>> [...]
>>> ; The following keyword 'mwisendtype' enables various VMWI
>>> methods on FXS lines (if supported). The default is to send
>>> FSK only. The following options are ; available; ; 'fsk' or
>>> undefined for exisiting FSK only support.
>>> ; 'none' no FSK spill heard every second time you go off
hook.
>>> ; 'rpas' for existing support ring pulse before FSK ;
'lrev'
>>> line reversed while messages exist ; 'hvdc' high voltage,
>>> 90Vdc idle voltage ; 'hvac' high voltage neon generation,
>>> Following Silicb AN33 ; 'nofsk' Disables FSK MWI spills
from
>>> being sent out.
>>> ; It is feasible that multiple options can be enabled.
>>> ;
>>> mwisendtype=fsk,lrev,hvac
>>> [...]
>>>
>>> root at io:~# cat /sys/module/xpd_fxs/parameters/vmwi_ioctl
>>> Y
>>> root at io:~# cat /sys/module/xpd_fxs/parameters/reversepolarity
>>> N
>>> root at io:~# cat
/sys/module/xpd_fxs/parameters/poll_digital_inputs
>>> 1000
>>> root at io:~# cat /sys/module/xpd_fxs/parameters/ring_trapez
>>> N
>>> root at io:~# cat /sys/module/xpd_fxs/parameters/dtmf_detection
>>> Y
>>> root at io:~# cat /sys/module/xpd_fxs/parameters/debug
>>> 0
>>>
>>> root at io:~# dahdi_scan
>>> [1]
>>> active=yes
>>> alarms=OK
>>> description=Wildcard TDM410P
>>> name=WCTDM/0
>>> manufacturer=Digium
>>> devicetype=Wildcard TDM410P
>>> location=PCI Bus 01 Slot 08
>>> basechan=1
>>> totchans=4
>>> irq=0
>>> type=analog
>>> port=1,FXS
>>> port=2,FXS
>>> port=3,FXS
>>> port=4,FXS
>>>
>>> this is my software info :
>>> io*CLI> core show version
>>> Asterisk 1.8.10.1 built by root @ io on a i686 running Linux on
>>> 2012-03-27 00:53:01 UTC
>>> io*CLI> dahdi show version
>>> DAHDI Version: 2.6.0 Echo Canceller: HWEC, MG2
>>>
>>> and this is my kernel info :
>>> root at io:~# lsmod
>>> Module Size Used by
>>> dahdi_echocan_mg2 4691 4
>>> xpd_fxs 29178 0
>>> xpp 138396 1 xpd_fxs
>>> wctdm24xxp 97993 2
>>> dahdi_voicebus 44395 1 wctdm24xxp
>>> dahdi 192410 9
dahdi_echocan_mg2,xpd_fxs,xpp,wctdm24xxp,dahdi_voicebus
>>> [...]
>>>
>>> root at io:~# uname -a
>>> Linux io 2.6.33.4-smp #2 SMP Wed May 12 22:47:36 CDT 2010 i686
>>> Intel(R) Pentium(R) 4 CPU 2.60GHz GenuineIntel GNU/Linux
>>>
>>>
>>>
>>>
>>>
>>> --
>>> Mathieu Therrien, VE2TMQ / VA2IO
>>> B. Sc. A. Genie Logiciel
>>> www.ve2tmq.ca
>>> VoIP: sip:*99730 at sipbroker.com iNUM: +883-5100-099-01841
>>> PSTN: +1-514-316-9498
>>>
>>> PGP id : 0xA2882612
>>> PGP FingerPrint : FC7C 9D8A 11BE 7C0E C95B 1D2A E372 338C A288 2612
>
--
Mathieu Therrien, VE2TMQ / VA2IO
B. Sc. A. Genie Logiciel
www.ve2tmq.ca
VoIP: sip:*99730 at sipbroker.com iNUM: +883-5100-099-01841
PSTN: +1-514-316-9498
PGP id : 0xA2882612
PGP FingerPrint : FC7C 9D8A 11BE 7C0E C95B 1D2A E372 338C A288 2612