search for: wanpipe4

...measuring accuracy... 99.999512% 99.992874% --- Results after 2 passes --- Best: 100.000 -- Worst: 99.993 -- Average: 99.996193, Difference: 99.996683 [root at sitges bin]# service wanrouter stop Shutting down asterisk: [ OK ] Stopping Asterisk... Shutting down wanpipe4 interface: w4g1 Shutting down wanpipe3 interface: w3g1 Shutting down wanpipe2 interface: w2g1 Shutting down wanpipe1 interface: w1g1 Shutting down device: wanpipe4 Shutting down device: wanpipe3 Shutting down device: wanpipe2 Shutting down device: wanpipe1 No devices running, Unloading Modules [ro...

...-- Executing [691918892 at pbx1:2] Hangup("SIP/xtravoip200-009d24b0", "") in new stack == Spawn extension (pbx1, 691918892, 2) exited non-zero on 'SIP/xtravoip200-009d24b0' wanrouter status: wanrouter status Devices currently active: wanpipe1 wanpipe2 wanpipe3 wanpipe4 wanpipe5 wanpipe6 wanpipe7 wanpipe8 Wanpipe Config: Device name | Protocol Map | Adapter | IRQ | Slot/IO | If's | CLK | Baud rate | wanpipe1 | N/A | A101/1D/A102/2D/4/4D/8| 17 | 4 | 1 | N/A | 0 | wanpipe2 | N/A | A101/1D/A102/2D/4/4D/8| 17 | 4...

...ware loop on port 1. All the other ports are open. wanrouter status shows the expected result: Device name | Protocol | Station | Status | wanpipe1 | AFT TE1 | N/A | Connected | wanpipe2 | AFT TE1 | N/A | Disconnected | wanpipe3 | AFT TE1 | N/A | Disconnected | wanpipe4 | AFT TE1 | N/A | Disconnected | However: # dahdi_scan 2 [2] active=yes alarms=OK description=wanpipe2 card 1 name=WPE1/1 manufacturer= devicetype= location= basechan=1 totchans=31 irq=0 type=digital- syncsrc=0 lbo=0 db (CSU)/0-133 feet (DSX-1) coding_opts=HDB3 framing_opts=CCS,CRC4 codin...

...roup=1 callgroup=1 pickupgroup=1 ; Span 2: WPE1/1 "wanpipe2 card 1" HDB3/CCS/CRC4 RED group=1,12 context=from-internal switchtype = euroisdn ;overlapdial = outgoing priindication = inband signalling = pri_net channel => 32-46,48-62 context = default group = 63 Span 4: WPE1/3 "wanpipe4 card 3" HDB3/CCS/CRC4 group=4,14 context=outrt-001-PSTN_E1 switchtype=qsig signalling=pri_cpe ;facilityenable=yes ;callprogress=yes pridialplan=unknown prilocaldialplan=unknown ;priindication = outofband ;overlapdial = incoming ;priexclusive = yes ;pritimer => t200,1000 ;pritimer => t31...

...cription Alarms IRQ bpviol CRC4 wanpipe1 card 0 OK 0 0 0 wanpipe2 card 1 RED 0 0 0 wanpipe3 card 2 RED 0 0 0 wanpipe4 card 3 RED 0 0 0 1 19:33:14 NOTICE[17314]: chan_zap.c:6342 handle_init_event: Alarm cleared on channel 1 Mar 1 19:33:14 NOTICE[17314]: chan_zap.c:6342 handle_init_event: Alarm cleared on channel 2 Mar 1 19:33:14 NOTICE[17314]: chan_zap.c:634...

...tion Alarms IRQ bpviol CRC4 wanpipe1 card 0 OK 0 0 0 wanpipe2 card 1 RED 0 0 0 wanpipe3 card 2 RED 0 0 0 wanpipe4 card 3 RED 0 0 0 DAHDI_DUMMY/1 (source: HRtimer) 1 UNCONFIGUR 0 0 0 The unreachable part is rather odd given that the two apps are on the same host. Reading some articles on the subject I fo...

...5,17-31 hardhdlc=16 #Sangoma A104 port 2 [slot:1 bus:16 span:2] <wanpipe2> span=2,0,0,ccs,hdb3,crc4 bchan=32-46,48-62 hardhdlc=47 #Sangoma A104 port 3 [slot:1 bus:16 span:3] <wanpipe3> span=3,0,0,ccs,hdb3,crc4 bchan=63-77,79-93 dchan=78 #Sangoma A104 port 4 [slot:1 bus:16 span:4] <wanpipe4> span=4,0,0,ccs,hdb3,crc4 bchan=94-108,110-124 dchan=109 I have also tried with hardhdlc=109 and have the same problem. zapata.conf: [channels] language=en usecallerid=yes hidecallerid=no callwaiting=no callwaitingcallerid=yes restrictcid=no usecallingpres=no threewaycalling=yes callreturn=yes...

...escription Alarms IRQ bpviol > CRC4 > wanpipe1 card 0 OK 0 0 0 > wanpipe2 card 1 RED 0 0 0 > wanpipe3 card 2 RED 0 0 0 > wanpipe4 card 3 RED 0 0 0 > > > > 1 19:33:14 NOTICE[17314]: chan_zap.c:6342 handle_init_event: Alarm cleared > on channel 1 > Mar 1 19:33:14 NOTICE[17314]: chan_zap.c:6342 handle_init_event: Alarm > cleared on channel 2 > Mar 1 19:33:14 N...