Displaying 10 results from an estimated 10 matches for "wanpipe3".
Did you mean:
wanpipe
2008 Oct 06
2
Conneting Asterisk to Swyx pri
...n bad
channel 0/30 on span 3
[Oct 6 10:55:55] WARNING[9794]: chan_zap.c:8074 pri_fixup_principle: Can't
fix up channel from 63 to 92 because 92 is already in use
And eventually no more calls can be placed from swyx to asterisk... time for
some configs... and before anyone says something about wanpipe3 and 4 having
dchan=0, i tried with dchan=16 and no calls can be placed...
I hope someone can point me in the right direction as we're trying to get
rid of swyx since we're tied down by limiting software and excessive
licensing costs.
Thanks!
Geraint
pri show spans shows all spans as up...
2008 Nov 19
1
dahdi_test drops after restarting Sangoma driver
...874%
--- Results after 2 passes ---
Best: 100.000 -- Worst: 99.993 -- Average: 99.996193, Difference: 99.996683
[root at sitges bin]# service wanrouter stop
Shutting down asterisk: [ OK ]
Stopping Asterisk...
Shutting down wanpipe4 interface: w4g1
Shutting down wanpipe3 interface: w3g1
Shutting down wanpipe2 interface: w2g1
Shutting down wanpipe1 interface: w1g1
Shutting down device: wanpipe4
Shutting down device: wanpipe3
Shutting down device: wanpipe2
Shutting down device: wanpipe1
No devices running, Unloading Modules
[root at sitges bin]# service wanrouter st...
2010 Oct 01
2
No translator path exists for channel type DAHDI (native 76) to 256
...0/0/1)
-- Executing [691918892 at pbx1:2] Hangup("SIP/xtravoip200-009d24b0", "")
in new stack
== Spawn extension (pbx1, 691918892, 2) exited non-zero on
'SIP/xtravoip200-009d24b0'
wanrouter status:
wanrouter status
Devices currently active:
wanpipe1 wanpipe2 wanpipe3 wanpipe4 wanpipe5 wanpipe6 wanpipe7 wanpipe8
Wanpipe Config:
Device name | Protocol Map | Adapter | IRQ | Slot/IO | If's | CLK | Baud
rate |
wanpipe1 | N/A | A101/1D/A102/2D/4/4D/8| 17 | 4 | 1 |
N/A | 0 |
wanpipe2 | N/A | A101/1D/A102/2D/4/4D/8| 17...
2009 Dec 03
2
dahdi_tool shows no alarms, but no line connected
...dahdi_tool or dahdi_scan.
I've just put a hardware loop on port 1. All the other
ports are open.
wanrouter status shows the expected result:
Device name | Protocol | Station | Status |
wanpipe1 | AFT TE1 | N/A | Connected |
wanpipe2 | AFT TE1 | N/A | Disconnected |
wanpipe3 | AFT TE1 | N/A | Disconnected |
wanpipe4 | AFT TE1 | N/A | Disconnected |
However:
# dahdi_scan 2
[2]
active=yes
alarms=OK
description=wanpipe2 card 1
name=WPE1/1
manufacturer=
devicetype=
location=
basechan=1
totchans=31
irq=0
type=digital-
syncsrc=0
lbo=0 db (CSU)/0-133 feet (...
2010 Oct 26
3
Channel Bank ? Simple Switch Hangup?
...es=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
relaxdtmf=yes
rxgain=0.0
txgain=0.0
group=1
callgroup=1
pickupgroup=1
immediate=no
;Sangoma A104 port 3 [slot:1 bus:1 span:3] <wanpipe3>
context=from-cb
group=3
echocancel=yes
signalling=fxo_ls
channel => 49-72
immediate=yes
Extensions.conf:
[from-cb]
exten => s,1,DISA,no-password|internal
[internal]
include => sip-stations
include => iax-trunks
include => outbound
[out...
2006 Mar 01
3
my zap channel not ringing
...> 94-108, 110-124
the channel status
*CLI> zap show status
Description Alarms IRQ bpviol
CRC4
wanpipe1 card 0 OK 0 0 0
wanpipe2 card 1 RED 0 0 0
wanpipe3 card 2 RED 0 0 0
wanpipe4 card 3 RED 0 0 0
1 19:33:14 NOTICE[17314]: chan_zap.c:6342 handle_init_event: Alarm cleared
on channel 1
Mar 1 19:33:14 NOTICE[17314]: chan_zap.c:6342 handle_init_eve...
2009 Oct 23
1
Strange IAX2 / Iaxmodem problem
...to be safe I loaded the dahdi_dummy too
*CLI> dahdi show status
Description Alarms IRQ bpviol CRC4
wanpipe1 card 0 OK 0 0 0
wanpipe2 card 1 RED 0 0 0
wanpipe3 card 2 RED 0 0 0
wanpipe4 card 3 RED 0 0 0
DAHDI_DUMMY/1 (source: HRtimer) 1 UNCONFIGUR 0 0 0
The unreachable part is rather odd given that the two apps are...
2009 Feb 04
3
siemens hipath 4000
I am connecting to a siemens hipath 4000 with dahdi 2.1.0.4
and asterisk 1.4.23 using a Te210P card.
the phone guy is saying that the lines are reporting always BUSY.
however on my end the status shows OK.
Anyone seen this? Is there something different about connecting PRI to
siemens hipath?
system.conf shows:
loadzone=us
defaultzone=us
span=1,1,6,esf,b8zs
bchan=1-5
dchan=24
2008 Oct 21
1
hex b1 in CallerID sent by Asterisk On PRI
I'm trying to send CallerID info to a MetaSwitch system over a PRI. The
MetaSwitch gets the info exactly as it is sent by Asterisk, but I think
it might be having trouble with the Hexadecimal b1 that is being sent
just before the first character of the CallerID Name.
Does anyone know what the significance is of the b1 being sent here?
Or, is there a way to make Asterisk not send the b1
2006 Mar 02
0
RE: Asterisk-Users Digest, Vol 20, Issue 13
...>
> the channel status
>
> *CLI> zap show status
> Description Alarms IRQ bpviol
> CRC4
> wanpipe1 card 0 OK 0 0
0
> wanpipe2 card 1 RED 0 0
0
> wanpipe3 card 2 RED 0 0
0
> wanpipe4 card 3 RED 0 0
0
>
>
>
> 1 19:33:14 NOTICE[17314]: chan_zap.c:6342 handle_init_event: Alarm
cleared
> on channel 1
> Mar 1 19:33:14 NOTICE[17314]: chan_zap.c:6342 h...