Displaying 8 results from an estimated 8 matches for "vvvvvgc".
Did you mean:
vvvvgc
2004 Jun 16
1
Modified Prepaid Error
I am trying to install the Modified Prepaid App. I
have installed PostgeSQL, created the tables, etc.
Make Install runs ok. The when I try to launch
asterisk (asterisk -vvvvvgc), it fails to run. I get
the following errors,
1st error:
[app_prepaid.so] => (Prepaid Application)
== Parsing '/etc/asterisk/prepaid.conf': Found
Jun 16 14:27:27 ERROR[-1085267840]: app_prepaid.c:127
check_connected: app_prepaid: cannot connect to
database server localhost. Calls wi...
2007 Apr 09
2
Asterisk installation issue - CLI showing 0 active channels
...l driver I could see my digium card's led glow green.
Tested with zttool that its in OK state. I have configured fxsks=4 in
zaptel.conf(channel 4 cause FXO module is on port 4). I have also configured
channel 4 in incoming context in zapata.conf.
After all configuration I started asterisk with vvvvvgc and made a call, but
I didn't see any call log on asterisk console.
When I did core show channels its showing 0 active channels. Looks like I
did something wrong in my config.
Also I dont see red-alarm in zttool if I take out pstn line.
I have taken pstn line from my Vonage adapter and connec...
2005 Aug 08
2
zaphfc syslog flooding
...Is this "normal"?:
--------------------------------------------------
zaphfc: bchan rx fifo not enough bytes to receive! (z1=1360, z2=1353,
wanted 8 got 7), probably a buffer overrun.
zaphfc: dropped audio (z1=2712, z2=2695, wanted 8 got 17, dropped 9).
With Asterisk running (asterisk -vvvvvgc) but without ANY activity it
prints these messages. Can anybody explain to me what the problem is?
Or is there no "problem"?:
--------------------------------------------------
-- parse_srv: SRV mapped to host sipgate.de, port 5060
Scheduled a registration timeout # 227
Stopping re...
2004 Apr 21
1
one-way audio and isdn4linux
...erisk -------- winxp
x-lite | x-lite
|
pstn
The hardware involved is:
Compaq EVO with RH9/kernel 2.4.20-30.9.
Fritz!Card PCI v2
Asterisk CVS-04/17/04-21:36:18
Basically I run:
modprobe -a hisax_fcpcipnp
before I start asterisk with -vvvvvgc
The configs are like this:
MODEM.CONF:
[interfaces]
context=default
driver=aopen
driver=i4l
language=en
type=autodetect
stripmsd=0
dialtype=tone
mode=immediate
device => /dev/ttyI0
device => /dev/ttyI1
group=1
msn=0208080808
incomingmsn=*
device => /dev/ttyI0
device => /dev/ttyI1
EXTE...
2006 Nov 13
3
"Username/auth name mismatch" + SIP phone can't connect?
...hone is not natted
host=dynamic ; This device registers with us
canreinvite=no ; Asterisk by default tries to redirect
context=internal ; the internal context controls what we can do
4. Added an empty section at the bottom of /etc/asterisk/extensions.conf:
[internal]
;later
5. Launched asterisk -vvvvvgc. Launches with no error message
6. Configured the GrandStream phone with user=200, authname=200,
password=test, SIP server=192.168.0.252 (IP of Asterisk server), register=yes
7. When I plug/unplug the SIP phone, its network icon isn't displayed (ie.
there's no connection with the SIP se...
2003 Mar 20
11
Voicetronix
Has anyone gotten the voicetronix boards to work with Asterisk, what
would it take? Or does anyone know where I can get 4 ports or more fxs
PCI cards that do work with asterisk?
Brian J. Schrock
Network Engineer, RHCE, CCNA
Anistone Technologies
Phone: 614-798-9106
FAX: 614-573-7165
6926 Avery Rd.
Dublin, OH 43017
2005 Sep 06
1
Can get IAX connection but no SIP connection?
Ok I have a box with 2 nics, one "outside" and one "inside" (192.168.8.x)
I want to get connections for sip and iax on the outside connection
I have a firewall on the box but have opened the followng ports
pbx 5060-5070 udp + tcp
pbx 4569 udp
pbx 5036 tcp
pbx 2727 udp
pbx 10000-20000 udp
pbx 69 udp
This allows me to connect with iax but sip fails registration with a 408. I
2003 Dec 23
5
Auto Starting Asterisk
Hi,
I'm a newbie to the list, but have been screwing around with Asterisk
for the last 6 months or so (on a purely experimental basis so far).
I'm not a linux expert by any stretch, (I'm a Mac OS X user), so I'm
unsure where the line is drawn in terms of Linux issues or Asterisk
issues.
At present, I have to manually start Asterisk from the command line,
but I'd like to