search for: visdn

Is there anybody in this group that is using vISDN on an A@H server? I have a couple of questions, which are quite lengthy, and I do not want to pollute this list of there's no use in asking to begin with! TIA & BRgds -- F Peeters PIII 450 - 1 GB - * 1.2 - BRIstuff 0.3.0 Pre 1 - Florz patch 2 Sweex HFC-PCI modes=2 sync_slave=2 timer...

I have successfully placed a call into and out of the card from Asterisk using vISDN. The current vISDN snapshot now contains the PCI id's for the card so no patching should be required. Most of the initial testing failure was due to misconfiguration of vISDN by me and a bad entry in my sip.conf resulting in one way audio. So I have established that at least 1 channel of 1 po...

I'm looking at setting up a VoIP GSM gateway to connect to my asterisk box. What experience have people on this list have with GSM gateway hardware. I have been looking at the 2N voiceblue products. Steve -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20061028/87014bd9/attachment.htm

Hi all, I've been working with * for a long time now, but only with analog FXS/FXO systems. I am venturing towards setting up a box in Germany now and I believe that requires a Fritz card? Do I even have to use the Fritz cards? Why not a Digium card.... We have 2 ISDN lines ( --> 6 handsets) so I'm guessing that will require 2 Fritz PCI cards (they have 1 port only). Then

...James - can you please post the brand/model of the card and > supplier/cost etc. > > Cheers, > > Mark. > > On 3/13/06, James Harper <james.harper@bendigoit.com.au> wrote: > > I have successfully placed a call into and out of the card from Asterisk > > using vISDN. The current vISDN snapshot now contains the PCI id's for > > the card so no patching should be required. > > > > Most of the initial testing failure was due to misconfiguration of vISDN > > by me and a bad entry in my sip.conf resulting in one way audio. > > >...

Hi everybody I have installed a TrixBox with Asterisk 1.2.14 and relative upgreaded software. I Bristuffed it with last version of bristuff to use a Hemlet PCI ISDN CARD in a normal Italian EUROISDN installation. The * works fine except for the ISDN CARD. It is always Channel D down, but if a Call comes in, it works perfectly for some time, both inbound and outbound. It prompts Channel D UP!

Hello, I switched from my PSTN provider to a voip provider. (Voicedata in the Netherlands) >From the moment i switched all inbound calls are terminated after aproximatly 1 minute. The provider tells me it's not their issue since I have no other configuration than all their other users. What can I do. I removed all asterisk functionality by forwarding the inboud call directly to a local

Hi, I have a strange problem on some isdn modem channels. (* 1.0.9 / chan_modem / 2xHFC-S cards). Everything works fine but when the 2nd (and 3rd etc..) call comes in and * answers and there is about a 1/2 second of sound from the previous call (ivr) before the sound from the new call is heard. It just sounds bad and is quite annoying. I am assuming this is sound that is still in a buffer

Hi all I don't manage to get asterisk 1.2.5 or 1.2.6 running with the zaphfc driver.... The scripts from junghanns.net do download a very old libpri and asterisk version which is too buggy for me to use. Isn't there an acutal patch to get zaphfc support in *? -Benoit-

...y helpful, and the freepbx forum admins still haven't approved my account, so I thought I'd try here... Any help appreciated! -- F Peeters PIII 450 - 1 GB - * 1.2 - BRIstuff 0.3.0 Pre 1 - Florz patch 2 Sweex HFC-PCI modes=0 sync_slave=0 timer_card=0 AMD Duron 1GHz - 1GB - * 1.2.1 - vISDN 2 Sweex HFC-PCI cards

I may have found a source of an A-Ticked HFC 4BRI PCI adapter in Australia, and will be testing one next week if all goes well. I don't want to post the details of the reseller online unless invited to do so, so if nobody replies and says they are interested then I won't :) I'll follow up once I've tested it. Let me know if you want the details. James

Hi.., we have two asterisk server interconnected to each other through IAX2 trunk in two separate office. with this bellow configuration do we need to have Licensing for using G729 codec???? Office A --------T1 ----- Astrisk TE05P----------------IAX2----------------Astrisk Box -2 | |

..... :-( > > > Exhausted from trying a million things, > I haven't been following this thread at all, so forgive me if I'm suggesting stuff that you've already been told a billion times, but isn't the qozap driver only for the quad/octo cards? Also, have you tried the vISDN driver? That worked for me on a HFC-4S card I had a lend of. James

Simple as that please email me direct. voipviews@gmail.com Also looking for a U.S. DID provider as well as orig provider.

I'm trying to use a Teles (netjet) ISDN BRI card with asterisk 1.2.9.1 Anyone was able to use this card with asterisk? I couldn't find much information about it. Any help?

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Message: 16 Date: Wed, 18 Oct 2006 16:10:38 +0100 From: "Neil Tancock" <neil@safeharbourit.co.uk> Subject: [asterisk-users] IAX Terminal To: "'Asterisk Users Mailing List - Non-Commercial Discussion'"

...#39;d probably still wouldn't know! *ROFLOL* It gives me pause though... Maybe it's time to get rid of my fixed line... ;-) -- F Peeters PIII 450 - 1 GB - * 1.2 - BRIstuff 0.3.0 Pre 1 - Florz patch 2 Sweex HFC-PCI modes=0 sync_slave=0 timer_card=0 AMD Duron 1GHz - 1GB - * 1.2.1 - vISDN 2 Sweex HFC-PCI cards

Hello everyone. My land-line provider (Romtelecom) has a very nice offer for ISDN. All in all they offer me a digital land-line with 1 base number + 2 MSN's and that would make a grate addition to my full-time home office. Romtelecom say they're providing EURO-ISDN and the line is compatible with any euro-isdn compliant equipment. They say they'll install a NT at my office and this

Hi, at my Asterisk box, I have a few of IAX2 phones (configured with alaw/ulaw/gsm codecs, in this order) and a PRI E1 line. In iax.conf I hav: disallow=all allow=alaw allow=ulaw allow=gsm During some incoming call, I read at console: -- Executing Dial("Zap/2-1", "IAX2/215|20|TtwW") in new stack -- Called 215 -- Call accepted by 10.97.1.7 (format ulaw) --

It will be interesting to see how many standards get broken, and how many proprietary hooks get thrown into the pot. The bean counters smell some money, and their OS franchise is waning: http://www.nytimes.com/2006/06/26/technology/26soft.html -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.