Displaying 20 results from an estimated 323 matches for "usb3".
Did you mean:
usb
2011 Jul 13
4
OT: USB3 drive occasionally not detected
Hi Folks,
CentOS 5.5 x86_64
Asrock-Board with 2 USB3 plugs.
Normally USB3-drive is detected. But occasionaly after "umount" next time this
drive or other ones will not be detected.
I have to boot the PC - than it works - till next unrecognition.
On USB2 plugs all works correct.
No messages in /var/log/messages nor dmesg.
What happens...
2016 Sep 27
1
Centos & USB3
I replaced my development machine with 6 cores, 32 GB etc.
I thought it would be simply inserting the existing HDDs and
changing /etc/sysconfig/ifcfg-eth0 but,
* in the UEFI "BIOS" USB2 and USB3 work.
* in C5.11 USB2 works but USB3 does not.
* in C6.5 (my install disk; OS be updated to C6.8) USB2 works but USB3
does not.
On both C5 and C6 lsusb shows an entry for the plugged-in keyboard (USB2
socket) and for the wireless mouse (USB2 socket) but nothing else.
Please does anyone have any...
2016 Mar 04
2
USB3 driver?
Hi All,
Scientific Linux 7.2
# rpm -qa \*kvm\*
qemu-kvm-1.5.3-105.el7_2.3.x86_64
pcp-pmda-kvm-3.10.6-2.el7.x86_64
qemu-kvm-common-1.5.3-105.el7_2.3.x86_64
libvirt-daemon-kvm-1.2.17-13.el7_2.3.x86_64
Question: when I set "Controller USB" to "USB3", what
USB3 driver do I use to install Window 7?
Many thanks,
-T
--
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Computers are like air conditioners.
They malfunction when you open windows
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2016 Mar 05
0
USB3 driver?
...gt;
> Scientific Linux 7.2
>
> # rpm -qa \*kvm\*
> qemu-kvm-1.5.3-105.el7_2.3.x86_64
> pcp-pmda-kvm-3.10.6-2.el7.x86_64
> qemu-kvm-common-1.5.3-105.el7_2.3.x86_64
> libvirt-daemon-kvm-1.2.17-13.el7_2.3.x86_64
>
> Question: when I set "Controller USB" to "USB3", what
> USB3 driver do I use to install Window 7?
>
> Many thanks,
> -T
>
Hi,
These days when creating and installing Windows virtual machines, I tend
to use ISO images for the install process.
Windows 7 ISO images can be downloaded from:
https://www.microsoft.com/en-gb/s...
2013 Nov 19
13
[PATCH v7 1/2] libxl: usb2 and usb3 controller support for upstream qemu
Usage: usbversion=1|2|3 (default=0, no usb controller defined)
Specifies the type of an emulated USB bus in the guest. 1 for usb1,
2 for usb2 and 3 for usb3, it is available only with upstream qemu.
The old usb and usbdevice parameters cannot be used with this.
Changes from v6:
- now usbversion cannot be used with usb and usbdevice parameters
- now default is 0 (no usb controller defined)
Will be used only with usb redirection (from spice client) and...
2011 Nov 13
1
pci passthrough MoBo ASUS M4A89TD Pro/USB3
Hi people.
I had finally cross my USB to my DomU windows XP, justs 1 issue:
USB 2.0 not working only 1.1 is working.
I would to confirm with others that have the MoBo ASUS M4A89TD
Pro/USB3 if u have been able to passthrough the USB ports to HVM
windows?
I had try different settings on my BIOS, different settings on Xen
4.1, this under Centos x64 AMD
Athlon II 640.
I receive the message: non-page-aligned MMIO BAR went I try to start
my hvm with xm
xm create hvm...
xm pc...
2014 May 23
3
USB-3.0 on C6.5 ??
...does either esata or USB 3.0. My new motherboard (ASUS M5A99X EVO
R2.0) supports both, so I've tried both (of course, can't have a feature
without at least giving it a whirl! :)). esata seems to work fine,
I can copy gigs 'n gigs of data to it using the esata connection.
however, with USB3 it works for a bit then something goes wonky...
After copying some hundreds of megabytes (and I don't know if it is a
consistent number or not) suddenly my C6 box starts reporting write
errors.
some investigation shows that /dev/sdc (and /dev/sdc1) no longer exist
on the system. it takes a reb...
2014 May 16
9
Centos backup tools
Hi all!
I'm building a raid box to use for backups, connectivity will be either
USB3 or esata.
Looking for suggestions on backup software I can use.
I know there's rsync, which may be a good solution. I also find backupPC
at epel, backintime also at epel, kbackup.
DejaDup looks interesting, but none of the repos I'm set up to use
shows it being available.
some small det...
2015 Jan 15
3
[PATCH v3 00/16] virtio-pci: towards virtio 1.0 guest support
On Thu, Jan 15, 2015 at 10:18:18PM +0100, Gerd Hoffmann wrote:
> Hi,
>
> > QEMU side is still undergoing polishing, but is already testable.
>
> Looked art the qemu side for now, commenting here due to qemu patches
> not being posted to the list yet (guess that is at least partly already
> on your todo list):
Absolutely.
> * Both legacy and modern should be
2015 Jan 15
3
[PATCH v3 00/16] virtio-pci: towards virtio 1.0 guest support
On Thu, Jan 15, 2015 at 10:18:18PM +0100, Gerd Hoffmann wrote:
> Hi,
>
> > QEMU side is still undergoing polishing, but is already testable.
>
> Looked art the qemu side for now, commenting here due to qemu patches
> not being posted to the list yet (guess that is at least partly already
> on your todo list):
Absolutely.
> * Both legacy and modern should be
2018 Jan 25
0
Problems getting nouveau to work with either Geforce GT710 or Geforce 9800GT on ARM Cortex-A9
...: new USB bus registered, assigned bus number 1
[ 4.410347] orion-ehci f1058000.usb: irq 41, io mem 0xf1058000
[ 4.442309] orion-ehci f1058000.usb: USB 2.0 started, EHCI 1.00
[ 4.448564] hub 1-0:1.0: USB hub found
[ 4.452407] hub 1-0:1.0: 1 port detected
[ 4.456717] xhci-hcd f10f0000.usb3: xHCI Host Controller
[ 4.462059] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 2
[ 4.469634] xhci-hcd f10f0000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x00010010
[ 4.478201] xhci-hcd f10f0000.usb3: irq 48, io mem 0xf10f0000
[ 4.484272] hub 2-0:1.0: US...
2012 Jan 12
1
Wine installed... but not?
...tem was acting like wine was not installed. So I followed some advice I found and purged the package from my system and redownloaded it, which still made no difference.
I've just tried restarting after wiping it from the system, and this is what I've tried since:
Code:
xbmc at xbmc-H67N-USB3-B3:~$ wine
The program 'wine' can be found in the following packages:
* wine1.2
* wine1.3
Try: sudo apt-get install <selected package>
xbmc at xbmc-H67N-USB3-B3:~$ sudo apt-get install wine1.3
[sudo] password for xbmc:
Reading package lists... Done
Building dependency tree
R...
2015 Jan 16
0
[PATCH v3 00/16] virtio-pci: towards virtio 1.0 guest support
...is a single msix_init() call. xhci is
doing that too:
00000000febf0000-00000000febf3fff (prio 1, RW): xhci
00000000febf0000-00000000febf003f (prio 0, RW): capabilities
00000000febf0040-00000000febf043f (prio 0, RW): operational
00000000febf0440-00000000febf044f (prio 0, RW): usb3 port #1
00000000febf0450-00000000febf045f (prio 0, RW): usb3 port #2
00000000febf0460-00000000febf046f (prio 0, RW): usb3 port #3
00000000febf0470-00000000febf047f (prio 0, RW): usb3 port #4
00000000febf0480-00000000febf048f (prio 0, RW): usb2 port #1
00000000febf0490-...
2015 Jan 16
0
[PATCH v3 00/16] virtio-pci: towards virtio 1.0 guest support
...is a single msix_init() call. xhci is
doing that too:
00000000febf0000-00000000febf3fff (prio 1, RW): xhci
00000000febf0000-00000000febf003f (prio 0, RW): capabilities
00000000febf0040-00000000febf043f (prio 0, RW): operational
00000000febf0440-00000000febf044f (prio 0, RW): usb3 port #1
00000000febf0450-00000000febf045f (prio 0, RW): usb3 port #2
00000000febf0460-00000000febf046f (prio 0, RW): usb3 port #3
00000000febf0470-00000000febf047f (prio 0, RW): usb3 port #4
00000000febf0480-00000000febf048f (prio 0, RW): usb2 port #1
00000000febf0490-...
2018 Jan 23
2
Problems getting nouveau to work with either Geforce GT710 or Geforce 9800GT on ARM Cortex-A9
...: new USB bus registered, assigned bus number 1
[ 4.417416] orion-ehci f1058000.usb: irq 41, io mem 0xf1058000
[ 4.452186] orion-ehci f1058000.usb: USB 2.0 started, EHCI 1.00
[ 4.458441] hub 1-0:1.0: USB hub found
[ 4.462269] hub 1-0:1.0: 1 port detected
[ 4.466572] xhci-hcd f10f0000.usb3: xHCI Host Controller
[ 4.471914] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 2
[ 4.479489] xhci-hcd f10f0000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x00010010
[ 4.488057] xhci-hcd f10f0000.usb3: irq 48, io mem 0xf10f0000
[ 4.494130] hub 2-0:1.0: US...
2018 Jul 03
1
usb problem on Dell Latitude 3570
...ew full-speed USB device number 3 using xhci_hcd
> Jul 1 07:15:06 pygeum kernel: [ 31.836441] usb 3-1: device descriptor read/64, error -110
> Jul 1 07:15:06 pygeum kernel: [ 47.452351] usb 3-1: device descriptor read/64, error -110
> Jul 1 07:15:06 pygeum kernel: [ 47.560390] usb usb3-port1: attempt power cycle
> Jul 1 07:15:06 pygeum kernel: [ 48.212366] usb 3-1: new full-speed USB device number 4 using xhci_hcd
> Jul 1 07:15:06 pygeum kernel: [ 53.468442] xhci_hcd 0000:39:00.0: Timeout while waiting for setup device command
> Jul 1 07:15:06 pygeum kernel: [ 5...
2005 May 21
1
EHCI device
...1.0, legacy support
usb2: <SiS 5571 USB controller> on ohci2
usb2: USB revision 1.0
uhub2: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf7004000-0xf7004fff irq
11 at device 3.3 on pci0
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: SiS EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
When I plug my digital camera in, I g...
2018 Jul 02
2
usb problem on Dell Latitude 3570
Hello All,
after update to Centos7.5 all our Latitudes 3570 - some 150- suffer usb problems.
Plug and play doesn't work any more, people need to insert usb devices - mouse, keyboard, eidreader - first and then boot
in order to use them.
dmesg | tail -n15 gives these EM:
[ 25.164396] usb 1-8: device descriptor read/64, error -110
[ 25.418387] usb 1-8: new full-speed USB device number 6
2017 Feb 16
5
USB 2.0 device on a USB 3.0 plug
When I plug in my device which is USB 2.0 into a 3.0 slot (cause that is
all I have)
[495042.943074] usb 5-2: new low-speed USB device number 6 using xhci_hcd
[495043.100076] usb 5-2: device descriptor read/64, error -71
I receive the above error.
Is there a flag or setting that tells the USB to in a 2.0 mode ?
Thanks,
Jerry
2015 Jan 16
2
[PATCH v3 00/16] virtio-pci: towards virtio 1.0 guest support
...xhci is
> doing that too:
>
> 00000000febf0000-00000000febf3fff (prio 1, RW): xhci
> 00000000febf0000-00000000febf003f (prio 0, RW): capabilities
> 00000000febf0040-00000000febf043f (prio 0, RW): operational
> 00000000febf0440-00000000febf044f (prio 0, RW): usb3 port #1
> 00000000febf0450-00000000febf045f (prio 0, RW): usb3 port #2
> 00000000febf0460-00000000febf046f (prio 0, RW): usb3 port #3
> 00000000febf0470-00000000febf047f (prio 0, RW): usb3 port #4
> 00000000febf0480-00000000febf048f (prio 0, RW): usb2 port #1
>...