search for: usb0

Hi I intent to use brctl to bridge two devices on linux box. One is eth0, the other is USB net which is recognized as usb0 by linux box. Then I run following command # ifconfig eth0 down # ifconfig usb0 down # brctt addbr ipbr # brctl addif ipbr eth0 # brctl addif ipbr usb0 # ifconfig eth0 up # ifconfig eth0 0.0.0.0 # ifconfig usb0 up # ifconfig usb0 0.0.0.0 # ifconfig ipv6 up eth0...

...t 10:33, Larry Martell <larry.martell at gmail.com> > wrote: > > I am trying to get a centos 6 system on the internet with a tethered > > iPhone. I can see the phone with lsusb as bus 001 device 011. A post on > > stackoverflow said I would need to run "# ip link set usb0 up && dhcpcd > > usb0" > > > > But how do I reference my phone in that command? > > I thought that if the phone is in tethering mode that is all you need > to do. The command is saying setup an 'ethernet' port on the USB and > to ask for a dhcpd co...

HI all :-) Using debian stable (samba version 2:3.2.5-4 ) often I mount ntfs partition (using mount.ntfs-3g) of a usb external disk. So I can access from my lan to this usb disk. [usb0] path=/media/usb0 writable = yes browseable = no valid users = nick [...] when I finish to use this disk and I try to umount it samba doesn't release this the disk: umount /media/usb0 (or umount /dev/sdXX) umount: /media/usb0: device is busy because --> lsof|grep usb0 smbd 29491...

I am trying to get a centos 6 system on the internet with a tethered iPhone. I can see the phone with lsusb as bus 001 device 011. A post on stackoverflow said I would need to run "# ip link set usb0 up && dhcpcd usb0" But how do I reference my phone in that command?

...ge. A second configuration with bridging a USB Host to Host connection and the Ethernet on my Linux-Notebook, was succesful. But using the same Host to Host connection on my Arm9 board shows the same problems like the USB Host to Device connection. My configuration of the bridge is like: ifconfig usb0 0.0.0.0 up ifconfig eth0 0.0.0.0 up brctl addbr brd brctl setfd brd 100 brctl addif eth0 brctl addif usb0 ifconfig brd 192.168.1.1 Anybody there who can help? Regards Sascha Dikhoff P.S.: For interested readers the link from the tool netio http://ftp.leo.org/historic/comp/os/os2/leo/systools/ne...

...rry.martell at gmail.com> >>> wrote: >>>> I am trying to get a centos 6 system on the internet with a tethered >>>> iPhone. I can see the phone with lsusb as bus 001 device 011. A post on >>>> stackoverflow said I would need to run "# ip link set usb0 up && dhcpcd >>>> usb0" >>>> >>>> But how do I reference my phone in that command? >>> I thought that if the phone is in tethering mode that is all you need >>> to do. The command is saying setup an 'ethernet' port on the US...

...e resent - email address not valid, I apalogize if you received it twice> I have the same problem than Volker Stolz a month ago! If I boot with the hub attached, it stops at : ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem0xdf000000-0xdf000fff irq 9 at device 2.0 on pci0 usb0: OHCI version 1.0, legacy support usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered If I boot w/o the hub, the boot completes and I can replug the USB...

...) and which is connected to that netvm (via vif42.0 interface, as seen in the netvm on the dumps below). Now, the netvm has two physical network interfaces assigned: 1) A standard Intel AGN (iwlwifi module, interface wlan0) -- this is just a PCI devices assigned 2) A USB 3G modem (cdc_ncm module, usb0 interface) -- this has been made available to the netvm by assigning a whole USB controller, where the 3G modem is connected to. This works fine. We do NAT in netvm for the traffic coming on vif* and send it out through the default outgoing interface, e.g. wlan0. Now, as long as I use the wlan0 fo...

...II ("GenuineIntel" 686-class, 128KB L2 cache) 767 MHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE real mem = 131624960 (125MB) avail mem = 119201792 (113MB) [...] uhci0 at pci0 dev 7 function 2 "VIA VT83C572 USB" rev 0x10: irq 11 [...] usb0 at uhci0: USB revision 1.0 uhub0 at usb0 "VIA UHCI root hub" rev 1.00/1.00 addr 1 [...] uhidev0 at uhub0 port 1 configuration 1 interface 0 "UIS_ABLER USB to Serial" rev 1.00/1.00 addr 2 uhidev0: no input interrupt endpoint This is the output of usbdevs (sorry, we have no...

...II ("GenuineIntel" 686-class, 128KB L2 cache) 767 MHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE real mem = 131624960 (125MB) avail mem = 119201792 (113MB) [...] uhci0 at pci0 dev 7 function 2 "VIA VT83C572 USB" rev 0x10: irq 11 [...] usb0 at uhci0: USB revision 1.0 uhub0 at usb0 "VIA UHCI root hub" rev 1.00/1.00 addr 1 [...] uhidev0 at uhub0 port 1 configuration 1 interface 0 "UIS_ABLER USB to Serial" rev 1.00/1.00 addr 2 uhidev0: no input interrupt endpoint This is the output of usbdevs (sorry, we have no...

...and the Internet connection sharing using Mandrake Control Center and the wizards I decided to do it all manually. Attached you will find my configuration files which I beleive demonstrated the problem. My PC has two or three NIC: - eth0 connected to my cable modem. - eth1 connected to my hub. - usb0 connected to my Zaurus, this interface is not permanent, it is there when the Zaurus is turn on and plug in the PC through a USB port. But as soon as you un-plug the Zaurus the interface disapear. It was all working fine until I decided to connect my PDA (SHARP Zaurus SL-5500) on the network us...

...9;d like to connect to a CentOS 5.2 system's console through a null-modem cable. An USB to serial converter is connected to that system's USB port. When using this configuration statement in "/etc/inittab"... ... # Run gettys on serial line (that is, a serial line connected to USB0) usb0:12345:respawn:/sbin/agetty -L ttyUSB0 9600 vt100 ... ...I get these messages if (and only if) the converter is *not* connected to the system (thus, if no ttyUSB0 device has been dynamically created): Nov 18 15:58:41 anyvizor init: Id "usb0" respawning too fast: disabled for 5 m...

Hello all! I've been trying to get my UPS working with my OpenBSD stable box and I haven't had any luck yet. dmesg shows that I have something from Powerware usb0 at uhci0: USB revision 1.0 uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 biomask f5fd netmask fffd ttymask ffff ugen0 at uhub0 port 1 "Powerware Powerware UPS" rev 0.20/0.50 addr 2 nut version 2.4.0.-pre1 driverctl start gives Can't open POWERWARE USB device, re...

Could people who are experiencing boot-time hangs in 4.9-PRERELEASE try the following patch to see if it helps? I've had one positive report so far, but it would be helpful to get more feedback to determine if this is the right fix to be committed. The problem was that interrupts were getting unmasked too early in the boot process, causing an interrupt storm that usually occurred while USB

...v 1.10/0.06, addr 2> on uhub0 ugen0: <American Power Conversion Smart-UPS 2200 XL FW:690.17.I USB FW:7.3, class 0/0, rev 1.10/0.06, addr 2> on uhub0[/code] --------------------------------------- ...and at run-time... --------------------------------------- # usbdevs -v -d Controller /dev/usb0: addr 1: full speed, self powered, config 1, product 0x0000(0x0000), vendor 0x0000(0x0000), rev 1.00 uhub0 port 1 addr 2: low speed, self powered, config 1, product 0x0002(0x0002), vendor 0x051d(0x051d), rev 0.06 ugen0 port 2 addr 3: low speed, power 100 mA, config 1, product 0x0201(0x0201),...

...artell <larry.martell at gmail.com> >> wrote: >> > I am trying to get a centos 6 system on the internet with a tethered >> > iPhone. I can see the phone with lsusb as bus 001 device 011. A post on >> > stackoverflow said I would need to run "# ip link set usb0 up && dhcpcd >> > usb0" >> > >> > But how do I reference my phone in that command? >> >> I thought that if the phone is in tethering mode that is all you need >> to do. The command is saying setup an 'ethernet' port on the USB and &g...

On 09/22/2017 04:50 PM, Jon Pruente wrote: > On Fri, Sep 22, 2017 at 10:39 AM, Larry Martell <larry.martell at gmail.com> > wrote: > >> Seems something else is using usb0 - without the phone connected I see >> something on usb0 when running ifconfig. I think it's some internal >> network. I tried running those commands when the phones be was connected >> but the system still is not on the internet. > > > Run 'udevadm monitor'...

...> This is the output I get with the ?x explore switch: > > Network UPS Tools - Generic HID driver 0.35 (2.6.2) > USB communication driver 0.31 > 0.000000 debug level is '3' > 0.001723 upsdrv_initups... > 0.296475 Checking device (0463/FFFF) (/dev/usb0//dev/ugen0) > 0.478783 - VendorID: 0463 > 0.478799 - ProductID: ffff > 0.478807 - Manufacturer: MGE UPS SYSTEMS > 0.478814 - Product: Evolution > 0.478822 - Serial Number: unknown > 0.478829 - Bus: /dev/usb0 > 0.478836 Trying to...

I have a motherboard here that reports USB controllers thusly in dmesg (5.4-stable): usb0: OHCI version 1.0, legacy support usb0: <SiS 5571 USB controller> on ohci0 usb0: USB revision 1.0 uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ohci1: <SiS 5571 USB controller> mem 0xf7002000-0xf7002fff irq 5 at device 3.1 on p...

...> on pcib1 vgapci0: <VGA-compatible display> port 0x9000-0x90ff mem 0xe0000000-0xefffffff,0xd0100000-0xd010ffff irq 10 at device 5.0 on pci1 ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xd0006000-0xd0006fff irq 9 at device 2.0 on pci0 ohci0: [GIANT-LOCKED] ohci0: [ITHREAD] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: <AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 4 ports with 4 removable, self powered pcm0: <Ace...