search for: upstypes

...ct driver for my UPS. Could you tell me what output certain commands should have if everything is correct? I need some criterion so that I can know that I have finally found the correct driver for my UPS. The powercom driver is probably the correct driver, I think I just need to experiment with the upstypes. So it would be nice to tell me some quick commands for starting the driver with different upstypes from the command line. I will do all tests necessary to find out the correct driver and upstype configuration for my UPS, apart from letting the UPS go to the real status "LB". I do not dar...

...ial port on low battery. That's it, nothing else. This serial port is also being used for communications so the other lines are going to be changing all the time, unrelated to the UPS state. Is there a "null" upstype I can use, and then add LB=RNG? Or can I choose one of the other upstypes and clear or unset the conditions associated with the other serial port lines? I previously used genpowerd and configured it like this: ... UPSTYPE=robot UPSPORT=/dev/ttyS0 # type cablep kill t powerok battok cableok robot --- RI 0...

Hi All, I'm new to Nut and had been looking for a way of monitoring a small UPS we have just designed. We are using simple contact closure circuit, but I don't appear to be able to get the Genericups driver to work. I've followed the documentation and have decided to try the APC upstype = 1 If I type 'genericups -x upstype=1 /dev/ttys0' , I get an error: 'Fatal error:

All, I just bought a Belkin F6C1100-UNV and am trying to get it to work with NUT. I have tried many drivers ( "belkin", "belkinunv", "genericups upstype=4", and "genericups upstype=7", "bestups", "fentonups"). None of them seem to work. Does anyone have any experience with this device? If there is some utility that you all use to

I am working with a number of our customers to ensure that NUT works with different UPS's on Freebsd 9.1. The current one I am looking is support for: *Upsonic Commercial UPS CXR 2000 - 2000VA/1200W - Rack/Tower* What seems to be supported in Freebsd is: CXR1000 blazer_ser LAN Saver 600 genericups upstype=0 Power Guardian genericups upstype=7 PrOffice 650 USB blazer_usb DS-800 USB

I am using nut 2.2.2 and I have a CyberPower CP550SL. According to the drivers list, I should be using genericups with upstype set to 7, but when I try that and when I run upsc I get: driver.name: genericups driver.parameter.LB: 04 driver.parameter.pollinterval: 2 driver.parameter.port: /dev/ups driver.parameter.upstype: 7 driver.version: 2.2.2 driver.version.internal: 1.34 ups.mfr: CyberPower

I am using nut 2.2.2 and I have a CyberPower CP550SL. According to the drivers list, I should be using genericups with upstype set to 7, but when I try that and when I run upsc I get: driver.name: genericups driver.parameter.LB: 04 driver.parameter.pollinterval: 2 driver.parameter.port: /dev/ups driver.parameter.upstype: 7 driver.version: 2.2.2 driver.version.internal: 1.34 ups.mfr: CyberPower

It look to me that overwriting UPSTYPE CP signal or polarity in ups.conf have no effect. Looking at drivers/main.c source show that &upstab[upstype].line_norm is set to custom CP in initinfo() only _AFTER_ the serial signals are actually set by upsdrv_initups().

On Jun 20, 2013, at 9:48 PM, Reed Hedges wrote: > UPSPORT=/dev/ttyS0 > > # type cablep kill t powerok battok cableok > robot --- RI 0 /RI --- --- > ? > > Is there an equivalent of ?---? in genericups? I think it's pretty much any value other than a valid

It look to me that overwriting UPSTYPE CP signal or polarity in ups.conf have no effect. Looking at drivers/main.c source show that &upstab[upstype].line_norm is set to custom CP in initinfo() only _AFTER_ the serial signals are actually set by upsdrv_initups().

On Jan 31, 2014, at 3:14 PM, Chris Duffy wrote: > The current one I am looking is support for: > > Upsonic Commercial UPS CXR 2000 - 2000VA/1200W - Rack/Tower > > What seems to be supported in Freebsd is: Small clarification: the hardware compatibility list isn't broken down by operating system (theoretically, the drivers should work on any POSIX system, with additional

Thx for the info Charles. Here is what I am seeing from 'usbconfig list' ugen0.1: <EHCI root HUB Intel> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE ugen1.1: <EHCI root HUB Intel> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE ugen0.2: <product 0x0024 vendor 0x8087> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE ugen1.2: <product 0x0024 vendor

Hi, Is there any way to debug a failure of NUT to shut a machine down AFTER the even occurs? (Be it a config issue {Though the standard "It hasn't changed since install" applies}, or a UPS failure, or a program failure). Its showing up (after reboot) as : valhalla# upsc robanton at localhost driver.name: genericups driver.parameter.pollinterval: 2 driver.parameter.port:

Dear nut users, I am running nut-2.6.0 on Slackware-Linux-13.37.0 with kernel 2.6.37.6. I am trying to get the software work for a repotec UPS with model name: RPT-1003AU. The UPS communicates with the computer via USB. I know that the model is not officially supported but I want to try out whether it will work with some of the repotec drivers. Here is the result with the genericups upstype=13

Hi, I wanted to report some success with monitoring this UPS, a "Geek Squad" brand GS-700U that I purchased earlier this year from Best Buy Canada. Information about this... thing is very scarce so here is what I know: The unit itself is probably made by Cyberpower. It has a 9-pin serial port on the UPS, as well as a serial-USB adapter thing. I cracked open the serial-USB

Hello folks, I have a question regarding a sweex product. Its bundled with UPSmart v 2.12. I installed nut accordingly to the user manual included in the software. A quick check of data/drivers.list revealed to me i should use the: "Sweex" "500/1000" "contact closure - shipped with UPSmart" "genericups upstype=7" driver this driver

Hi Arjen, in server/upsd.c r731, you moved the call conf_load() from after check_perms() (~ l.1020) to before setupsignals() (~ l.989). The problem is that conf_load() needs to open the ups driver socket, and it assumes that STATEPATH is the current working directory. The directory is only set in l.1016. Therefore, the first attempt to open a socket will always fail. From the user's point of

On Feb 3, 2014, at 9:05 PM, Chris Duffy wrote: > Thx for the info Charles. > > Here is what I am seeing from > 'usbconfig list' [...] > ugen1.3: <USB UPS PPC> at usbus1, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON > > > The last line I guess is key. Unfortunately, it is not very unique: the vendor can pick the string "USB UPS PPC", but the drivers

Hi, is there a way to use my Belkin F6H650 on the USB port? I already installed usbhid-support, but neither the hidups worked (reports "/dev/usb/hiddev0 is not a UPS") nor genericups with upstype=7 and the hiddev set as device ("ioctl TIOCMSET: Invalid argument") worked. I have installed the debian sarge package of nut 2.0.1 (2.0.1-4) Regards, Philipp

I need a little help on this problem, please? I include my /etc/apcupsd/apcupsd.conf file is attached. port 3551 udp/tcp has been added to the (running) firewall. My APC is recognized as: APC Back-UPS 450 FW:844.Kld.D USB FW:Kld This from the hardware browser. PS says: root 2419 0.0 0.0 4196 584 ? Ss Mar23 0:09 /sbin/apcupsd -f /etc/apcupsd/apcupsd.conf Is group 2419 the