search for: u320

...ostics has been run for hours. One of our other DL585 servers is physically very close to the problem server but runs NFS instead of Samba on XFS filesystems. It has not had this problem. The only significant hardware difference between the NFS server and Samba server is that the NFS server has all U320 hard drives. Physical config: HP DL 585 with dual processor and 3 6404 4 channel SCSI raid controllers. 6 U320 converted 4200 drive chassis with 72 GB U3/U320 and 146 GB U320. 8 GB ram. Firmware for all parts including disks has been flashed repeatedly over the last two years to current levels. Fir...

...at > the board today, but the contents of /proc/scsi/scsi is : what does `lspci` have to say about this raid card ? John, Thanks for the prompt : lspci demonstrates : 02:01.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID (rev 01) 02:02.0 SCSI storage controller: Adaptec AIC-7902B U320 (rev 10) 02:02.1 SCSI storage controller: Adaptec AIC-7902B U320 (rev 10) Greg

...egory P. Ennis wrote: > what does `lspci` have to say about this raid card ? > > John, > > Thanks for the prompt : > > lspci demonstrates : > > 02:01.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID (rev 01) > 02:02.0 SCSI storage controller: Adaptec AIC-7902B U320 (rev 10) > 02:02.1 SCSI storage controller: Adaptec AIC-7902B U320 (rev 10) could you try `lspci -nn`, this will return the vendor/device ID, which will pin down which megaraid it is. but, I'm afraid the answer is, that hardware is way over 10 years old, and support has been dropped fro...

Does anyone have any good or bad driver/performance/stability experiences with either: LSI Logic LSIU320 Adaptec 29320ALP-R or (or other current boards using the same driver) in Opteron servers running RHEL 4 or CentOS 4, x86_64? Thanks in advance. -- Inside every older person is a younger person wondering what happened

...ware'' raid on the scsi card is not supported in linux so I have set up the machine with software raid. Here are some more details that might be useful ... Here is the output of lspci for the scsi card that is in the machine ... ---snip--- 04:02.0 RAID bus controller: Adaptec ASC-39320(B) U320 w/HostRAID (rev 10) 04:02.1 RAID bus controller: Adaptec ASC-39320(B) U320 w/HostRAID (rev 10) ---snip--- The driver for this card is the aic79xx.o and I see that it is compiled into the Xen kernel. Does anyone have any idea what is happening and how I might get Xen installed? thanks -- pAntZ...

I get seg. fault with my * box. at the crash time i had about 35 Bridged Channel. i have: - dual xeon box (3.2Ghz) - 2Gb of memory - E7501 chipset motherboard. - U320 scsi disks - intel Gb ethernet device. - i only use sip for clients (no fxs in box) - TE405P for fxo (with 4 atran TA750). - ulaw is used as codec and echo cancellationo is enabled. but the core dump file has nothing to show with "gdb". this is the output of gdb: Program terminated wit...

I have three zpools on a server and want to add a mirrored pair of ssd''s for the ZIL. Can the same pair of SSDs be used for the ZIL of all three zpools or is it one ZIL SLOG device per zpool? -- This message posted from opensolaris.org

...egory P. Ennis wrote: > what does `lspci` have to say about this raid card ? > > John, > > Thanks for the prompt : > > lspci demonstrates : > > 02:01.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID (rev 01) > 02:02.0 SCSI storage controller: Adaptec AIC-7902B U320 (rev 10) > 02:02.1 SCSI storage controller: Adaptec AIC-7902B U320 (rev 10) could you try `lspci -nn`, this will return the vendor/device ID, which will pin down which megaraid it is. but, I'm afraid the answer is, that hardware is way over 10 years old, and support has been dropped fro...

...ooks like I may need to do just that. > > Here are the results with respect to the lsi raid board for : > > lspci -nn > > > 02:01.0 RAID bus controller [0104]: LSI Logic / Symbios Logic MegaRAID [1000:1960] (rev 01) > 02:02.0 SCSI storage controller [0100]: Adaptec AIC-7902B U320 [9005:801d] (rev 10) > 02:02.1 SCSI storage controller [0100]: Adaptec AIC-7902B U320 [9005:801d] (rev 10) The driver for your device LSI Logic / Symbios Logic MegaRAID [1000:1960] is disabled in the CentOS kernel (C6 and C7). # CONFIG_MEGARAID_LEGACY is not set You'd need a driver disk w...

The only PCI-X card I have is an old ICP Vortex RAID controller and the Dell hangs with that installed (BIOS is disabled). It's only for a tape drive so performance isn't really an issue. thanks

Date: Sat, 29 Apr 2017 10:17:55 -0400 > On Apr 29, 2017, at 9:50 AM, Gregory P. Ennis <PoMec at PoMec.Net> wrote: > > find a way to make the installation disc of Centos 6 identify the SCSI > drives. What model LSI card? Is that card on the RHEL hardware support list? Does LSI/Dell have drivers on their site? Have you tried drivers from LSI/Dell and using the dd(driver disk)

Afternoon, I've got an old Dell PERC 4DC (PCI 64bit/33MHz) sitting in my home rig and with a new board on the way that has PCI-X (133) and PCIe (x4) slots, I was wondering what people would recommend for a cheap hardware parallel SCSI RAID controller (no fake raid please) that is relatively cheap but faster then the old PERC? I'm looking for something cheap that'll do RAID-10 but

Below is from make buildworld output on FreeBSD cvsup'd to RELENG_4 (so 4.8-STABLE) on the following hardware: Intel SHG2 Hodges Dual Xeon board 2 x Intel Xeon 2.4Ghz (512k) 2 x 512MB PC-2100 266Mhz ECC DDR Seagate 36GB 10K U320 LC SCSI Adaptec SCSI Raid 2000s 48MB SDRAM Intel Hudson 3 SC5200 base w 450W Any suggestions? Cheers, Carl. <snip> cc -o make_keys -O -pipe -I. -I/usr/src/lib/libncurses -I/usr/src/lib/libncurses/../../contrib/ncurses/ncurses -I/usr/src/lib/libncurses/../../contrib/ncurses/include -Wall...

Hello, I have a Dell 1850 with dual Xeon procs and two u320 36Gb drives. I would like to set this up as dual boot system with 4.2 on disk 0 and 3.6 on disk 1. I imagine that I would install 4.2 first and then 3.6. Would I need to remove the other hard drive while installing a given version? Any gotchas? How about setting up GRUB? Anything special or does...

I need a SCSI card to attach a tape library to my system. I am looking at the Adaptec 29320A-R. Can anyone confirm that this card will work with the stock CentOS 4 kernel? -- Bowie

...52:51 neptune /kernel: (da2:ahd1:0:2:0): SCB 0x40 - timed out Jul 25 03:57:22 neptune /kernel: (da2:ahd1:0:2:0): SCB 0x18 - timed out Jul 25 03:58:53 neptune /kernel: (da1:ahd1:0:1:0): SCB 0x1e - timed out Jul 26 10:55:46 neptune /kernel: (da2:ahd1:0:2:0): SCB 0x39 - timed out The drives are all U320 Seagate Cheetah 70G ... no RAID involved, its just straight drives using the motherboard's onboard SCSI controller ... the motherboard is the Intel SE7501, in the SR2300 chassis ... It did it back on the 19th as well: Jul 19 19:37:16 neptune /kernel: (da2:ahd1:0:2:0): SCB 0x46 - timed out J...

...o Fedora Core 5 (keeping everything updated for GNUradio to run on CentOS 4 became more of a job that it should have) for our pulsar data processing machine (it has a GNUradio Universal Software Radio Peripheral (USRP) attached USB 2.0), which has a Dell PERC 4e/Di RAID controller, two 72GB 10k U320 SCSI drives, and four 146GB 10k U320 SCSI drives. Well, during installation of a sound card (so we can actually listen to the dedispersed, phase-aligned, and detected pulsar chirp audio), something happened to the RAID firmware, so I put the PERC in SCSI-only mode and installed anyway (I neede...

...ed into the new kernel! The rest haven't been rebooted yet so they are still at the 2.6.9-5 kernel. They all have similar messages in the logs as show below. Any ideas on where to look for the problem? Has anyone else seen this? Machine info: Typical of all 50 machines: P4 3Ghz 2gb ram U320 SCSI disk w/ lsi scsi controller Intel Workstation boards Nvidia graphics All machines exactly the same, installed w/ kickstart w/ these packages: %packages @ office @ legacy-software-development @ editors @ system-tools @ base-x @ gnome-software-development @ graphics @ smb-server @ development-...

...G3 > Dual P4 2.8 GHz Xeon Socket Processors with 512KB cache (FULL > processor speed) > 1GB RAM PC2100 DDR SDRAM 200MHz > 400MHz System Bus Speed > Dual NC7781 PCI-X Gigabit NICs > Integrated 5i Plus 64MB cache > RAID 5 Hard disk array: 6x 146GB 1.0" Hot-Plug Universal U320 SCSI 10K > RPM >

...domain. After enable the pciback module in dom0 and pcifront module in this guest domain, now I can read the config information about this scsi disk: when I run "lspci" in this guest domain, the following information comes out: 02:06.1 SCSI storage controller: Adaptec AIC-7902B U320 (rev 10) But the problem is that the driver of this scsi controller does not run to operate this scsi controller. When I access the file:/var/log/messages, I got some information like this: PCI: System does not support PCI PCI: System does not support PCI It looks the pci...