search for: trhough

Hello, I want to install a 2003 guest on a Debian Etch with xen binary packages (apt-get install), but through a vnc console (no graphical interface). So I launch the xm create in an ssh connection, and want to connect through vnc to complete the installation of windows. So the domain gets created with xm create but no VNC port is displayed: ----- Using config file "2003.hvm". VNC= 1

...ID providers ( other providers or trunks are fine) and I could reproduce it by calling a queue from my Wengophone Softphone and letting the MoH play for 185 secs. If I make the same call from my WRTP54G on the same place, the call doest not get hung up after 185 secs. The incoming calls go trhough a queue and get mixmonitored. I will make further tests but I tried changing several timeout and keepalive parameters on sip.conf but nothing got effect. Even tried with reinvites enabled and disabled. Does any one have a clue? Thanks

hi, i'm just look trhough the todo file, but it's rather large. i assume only a small part of it will be finished for 1.0. what is the schedule for 1.0? what kind of features will be included in 1.0? what is in 1.1 etc.. it'd be useful to see in the todo file that what features scheduled for which version. yours...

Hi, I've got two H.323 Client connected to Asterisk, when one of them requests boeing connected to the other I use CALL application and both get in touch trhough asterisk, but using Call Asterisk stays on the middle and the sound quality gets poor. Is there any way to 'transfer' the call so Asterisk doesn't stay in the middle ?? I use OpenH323GK (www.gnugk.org <http://www.gnugk.org/> ) as the gatekeeper. Thanks a lot. Marc Farg...

...tion... I mounted a router that makes my conections throug 2 external interfaces. Its working fine and my default gateway for entire network behind it (nated) is the link at interface eth0. All traffic going to port 80 is maked as 0x1 and I route it to a table that makes its default route trhough link2 (eth3). My problem begins when I try to use transparent proxy (squid) with this rule: iptables -t nat -A POSTROUTING -s 192.168.0.0/24 -p tcp -m tcp --dport 80 -j REDIRECT --to-ports 3128 If I make this rule my routing tables begins to scramble all my traffic and makes it going ALL...

...ror in eval(expr, envir, enclos) : could not find function "setClass" Error: unable to load R code in package 'FLCore' Execution halted make[2]: *** [indices] Error 1 make[1]: *** [all] Error 2 make: *** [pkg-FLCore] Error 2 *** Installation of FLCore failed *** methods is loaded trhough a require(methods) inside an .onLoad call. (3) The package compiles on a Linux machine with R 2.6.0 Is there any issue with MinGW or the Rtools he should consider? Many thanks, Iago

Hi, I am investigating an issue with voicemail and realtime. What we are seeing is the following: 1. Caller calls in and goes to an IVR 2. Presses 101 to go to voicemail 3. app_voicemail start and tries to connect to the database trhough res_config_mysql. However, it takes too long to be able to connect (~15 minutes) It seems like it first attemots to connect to the database on 16:25:03 and manage to connect at 16:40:24. [Mar 26 16:25:03] VERBOSE[19786] logger.c: -- AGI Script agi://127.0.0.1/enswitch?stype=external completed,...

...ne about this type of problem suggest NAT as being the culprit, but in this case, Asterisk is logging it's reception of the ACK but deciding to ignore it and retransmit the 200 OK anyhow. I'm guessing in other cases people suspect is' NAT because they believe SIP isn't getting back trhough after a period of time. I was using 1.4.2, but found this changelog today for 1.4.3: ftp://ftp.digium.com/pub/asterisk/releases/ChangeLog-1.4.3 2006-09-30 16:12 +0000 [r44068-44078] Paul Cadach <paul@odt.east.telecom.kz> * channels/chan_sip.c: Found some buggy SIP clients (phones Planet...

Dear, We are integrating Samba with Active Directory in the company. The goal is to provide a samba share to users of AD. In this case, we need all users to write on the share, but nobody modify or delete any files. Even the user who owns it. With this, we would create only one AD user, if necessary with root powers, which could erase everything. For this, we test several lines, such as

Hi, I have about 10 Cisco 7960s behind a PIX 506E (IOS v6.3) firewall. After some period of time, asterisk says that some of them are unreachable, and the phones lose their registration. The only way to make the phones recover is to clear the NAT translation tables for the phones on the PIX (clear xlate...) Does anyone know how to fix this? As you can imagine, it is quite annoying. And it does not

Hi All, I need to setup the following rights behavior trhough samba and I'm currently stuck after lots of unsuccessful tests. Maybe one of you has an idea or a solution to this problem... Here it comes: - A share must be available only to some users belonging to the "project" group. That's easy: valid users = @project - There are s...

...renewcommand{\MakeUppercase}[1]{\color{OliveGreen}\textsf{#1}} %\renewcommand{\abstractname}{\color{blue}Abstract} Also,'\usepackage[usenames]{color}' is suppossed to load all the available colors in the package 'color' but for some reason it doesn't load them when running it trhough Sweave. It loads all the colors if I run it outside R though. Here's a dummy document: \documentclass[12pt]{article} \usepackage{floatflt,graphicx,times,babel} \usepackage[usenames]{color} \usepackage{verbatim} \usepackage[ps2pdf, bookmarks=true, bookmarksnumbered=false, bookmarksopen=false,...

...\renewcommand{\MakeUppercase}[1]{\color{OliveGreen}\textsf{#1}} %\renewcommand{\abstractname}{\color{blue}Abstract} Also,'\usepackage[usenames]{color}' is suppossed to load all the available colors in the package 'color' but for some reason it doesn't load them when running it trhough Sweave. It loads all the colors if I run it outside R though. Here's a dummy document: Felipe D. Carrillo Supervisory Fishery Biologist Department of the Interior US Fish & Wildlife Service California, USA

...ect: [R] Optim (fct): Parameters=LowerBounds!? Message-ID: > <1335799824557-4598504.post at n4.nabble.com> Content-Type: text/plain; charset=UTF-8 Hey, i > am trying to do the MLE for Garch and have a problem with the optim function. Initally i > tried optim with Method=BFGS. Reading trhough the forum i found out i would neet bounds. > So i went on with Method=L-BFGS-B. But now my parameters equal the lower bounds. >> > out <- optim(par=initial, fn=LogLik.GARCH,X=X, P=1, Q=1, method = >> > "L-BFGS-B",lower =c(0.01,0.01,0.01), upper =c(0.99,0.99,0.99))...

Hi, 1. Has anyone got any success when send a TIFF file form one zoiper softphone to another ? I tried using Zoiper 2.18 free edition in windows but I'm seeing 415 Unsupported media replies. 2. Here (http://www.voipinfo.org/wiki/view/Asterisk+T.38), you can read : "Also, try using: t38_udptl=yes t38pt_rtp=no t38pt_tcp=no ... in the general section of the sip.conf and under the VoIP

...are not treated in this order. My question is : Is there a way to force llvm to treat the functions in the order given in the original C file ? and how? I treat each function in the EmitFunctionBody funtion of the AsmPrinter class, and the function is passed through the MachineFunction passed trhough the runOnMachineFunction function. I didn't find where this last function is called. So I wish maybe to alter the way this function is called for each Function to call it in the "right" order... Thanks, Best regards, IG

Greetings, I have a routing problem I am hoping can be solved. I have three networks. A Private network, and a dual network the private network connects too. The internal network talks through a gateway/router(linux redhat 7.2) that has a default route set that allows the internal network to talk to a computer on the external networks. The external network is a Redundant network scheme in

I have a program which needs to compute squared Euclidean distance between two vectors million of times, which the Rprof shows is the bottleneck. I wondered if there is any faster way than my own simple function distance2 = function(x1, x2) { temp = x1-x2 sum(temp*temp) } I have searched the R-help archives and can not find anything except when the arguments are matrices. Thanks for any

Hello every one. This is a question done by me, not yet answered. Please, help. I: 1. Run install-pdf from linux to support faxes on my asterisk. 2. Made the configurations throuhg AMP in a. Setup->Inbound Routing->(the only route I have)->fax extension->System b. Setup->Inbound Routing->(the only route I have)->fax email->(my email) c.

Hi. I installed solaris express developer edition (b79) on a supermicro quad-core harpertown E5405 with 8 GB ram and two internal sata-drives. I installed solaris onto one of the internal drives. I added an areca arc-1680 sas-controller and configured it in jbod-mode. I attached an external sas-cabinet with 16 sas-drives 1 TB (931 binary GB). I created a raidz2-pool with ten disks and one spare.