search for: timeslots

...hed phone. If I pick up the phone, it's connected and I can talk to the caller. Hanging up has no effect. I can see the bit transitions (0101 to 1111 when I go off hook), but no dial tone. My config is: controller T1 7/1 framing esf linecode b8zs cablelength short 133 ds0-group 0 timeslots 1 type fxs-loop-start ds0-group 1 timeslots 2 type fxs-loop-start ds0-group 2 timeslots 3 type fxs-loop-start ds0-group 3 timeslots 4 type fxs-loop-start ds0-group 4 timeslots 5 type fxs-loop-start ds0-group 5 timeslots 6 type fxs-loop-start ds0-group 6 timeslots 7 type fxs-loop-start...

Hi all, I need to setup call using particular timeslot on one of E1's. I've looked into http://www.voip-info.org/wiki/index.php?page=Asterisk+Zap+channels and it says that: exten => TestTrakt,1,Dial(ZAP/1-2/517255333) exten => TestTrakt,2,hangup should work and force call setup via span 1 (port 1) but when I try setup call rasterisk says: -- Executing [TestTrakt at

Hi, is there a dovecot feature I did not found yet, which can limit the access to the server to special timeslots like working hours? Or is that a serverside / sssd / auth / pam / account feature? Thanks for hints to some helpfull documentation and sugesstions. Regards . G?tz -------------- next part -------------- A non-text attachment was scrubbed... Name: smime.p7s Type: application/pkcs7-signatur...

Dear all, In order to reduce clutter, may I suggest that cancelled timeslots be removed from the "Past Office Hours" section of the "OfficeHours" wiki page? Also, I noticed that the URL for 20th Jan 2014 event is missing. Regards, Timothy Lee

I wouldn't expect you to be using RFC3389 if your using A-law, can you include your IOS version and IOS config file ... I have not specified any allow's or disallow's in my * config for the codecs with my 5300, I also use Cisco 79xx phones and I use the option within the phones config file to select the preffered codec and when I change this to G.729/A-law/U-law all works perfectly

Hi, I created a calendar class and i now have a method which gives me a 1 day view with timeslots etc. now i want to re-use that code for generating 2 and 5 day views. how can i re-use my code so i can make a show_two_days class which uses the logic of the show_one_day class? am i correct it can''t be done with helpers? regards, Remco -- Posted via http://www.ruby-forum.com/.

Hi List, The following code returns an "Error in as.POSIXlt.character(x, tz, ...) : character string is not in a standard unambiguous format" require(raster) require(rts) require(stringi) r <- raster(ncol=100, nrow=100) values(r) <- runif(ncell(r)) list(ID=seq(1:24),month=rep(str_pad(1:12, pad = 0,width = 2 , "left"),2),year=sort(rep(2016:2017,12)))->dt

...er network-clock base-rate 56k no aaa new-model ip subnet-zero ! voice class codec 10 codec preference 1 g711ulaw codec preference 2 g711alaw codec preference 4 g729r8 codec preference 6 g729ar8 ! ! no voice confirmation-tone ! controller T1 0 mode cas framing esf linecode b8zs ds0-group 1 timeslots 1-4 type e&m-wink-start fdl both ! controller T1 1 mode cas framing esf linecode b8zs ds0-group 1 timeslots 1-4 type e&m-wink-start ! ! ! interface Tunnel1 no ip address ! interface Ethernet0 ip address xx.xx.xx.xx 255.255.255.248 ! interface Serial0 no ip address shutdown ! interf...

Hi Team, i have been facing issues with sangoma card with 16 E1. used LibSS7 asterisk 1.6 with 8 E1 the links are stable , but moment i add another card of 8 E1 for to support 16 E1. link keeps fluctuating any idea why ? Please help Thanks Vinod Dharashive -------------- next part -------------- An HTML attachment was scrubbed... URL:

...ce class codec 1 codec preference 1 g711alaw ! voice class codec 7 codec preference 1 g711alaw ! ! ! ! ! ! ivr prompt memory 16384 files 1000 fax interface-type fax-mail mta receive maximum-recipients 0 call-history-mib max-size 500 dial-control-mib max-size 1200 ! controller E1 0 ds0-group 0 timeslots 1-15,17-31 type r2-digital ds0 busyout 15,27 hard ! controller E1 1 clock source line primary pri-group timeslots 1-31 ! controller E1 2 shutdown ! controller E1 3 shutdown pri-group timeslots 1-31 ! gw-accounting h323 gw-accounting h323 vsa gw-accounting voip ! ! interface Ethernet0...

...GMT 0 dspint DSPfarm1/0 ! ip subnet-zero no ip routing ! ! ip name-server XXX.XXX.XXX.XXX ! no ip cef isdn switch-type primary-ni call rsvp-sync voice call send-alert voice rtp send-recv ! voice service voip ! ! ! ! ! ! controller T1 1/0 framing esf linecode b8zs cablelength long 0db pri-group timeslots 1-24 ! controller T1 1/1 framing esf linecode b8zs cablelength long 0db pri-group timeslots 1-24 ! controller T1 2/0 framing esf service-type ccs-voice linecode b8zs cablelength long 0db pri-group timeslots 1-24 ! controller T1 2/1 framing esf service-type ccs-voice linecode b8zs cable...

...t to the PSTN via a channelised E1 interface, with * handling all of the SIP calls. If anyone has any installation tips / help / documentation I would be most appreciative :) However, my first question is this: when I am in the setup, I see the following: Current interface summary Controller Timeslots D-Channel Configurable modes Status E1 0/0 31 15 pri/channelized Administratively up E1 1/0 31 15 pri/channelized Administratively up I have set both controllers to hdb3, ccs with crc4 I notice that the D-Channel is set to 15. However, in the zaptel.con...

The soundfiles I submitted earlier today have been cleaned up, and added to the Digium CVS server in a more formal manner. Also, some of the really bad formatting in my .txt description file has been rectified. All of the sounds on my website are now on the Digium site, and I will be submitting future changes via patches to Digium for additional sounds. Ideas welcome for more text; I may

Hi everyone, This is just a reminder of our upcoming monthly meeting, on the 7th of September at 18:00 GMT - we've changed to a new timeslot for this month, so I thought it'd be worth reminding people a couple of days in advance. Hopefully the new time will be a little easier for most of our contributors and other interested parties to make it to. We've got a preliminary agenda at

Hi everyone, This is just a reminder of our upcoming monthly meeting, on the 7th of September at 18:00 GMT - we've changed to a new timeslot for this month, so I thought it'd be worth reminding people a couple of days in advance. Hopefully the new time will be a little easier for most of our contributors and other interested parties to make it to. We've got a preliminary agenda at

Hi All, These are the code that i used to plot the kmeans clustering. DataSetS01022<-rbind(matrix(rnorm(50),ncol=2), + matrix(rnorm(50),ncol=2)) > colnames(DataSetS01022) <-c("timeslot","em") > (cl <-kmeans(DataSetS01022,2)) >plot (DataSetS01022, col=cl$cluster) > points(cl$centers, col = 1:2, pch = 8, cex=2) Now, i would like to do *the same process

Hi We interfaced our ASCOTEL PBX to Asterisk. by EuroISDN PRI , DSS1 It works fine on channels 1- 15, but on 17-31 the miststood each other. Asterisk speaks in Timeslots, the PBX in B-channels The signalling is ok, but the bridging is shifted. The first incoming connection is bridged to "nirwana" also no indication is hearable, calling a second internal subcribes bridges them to the first. The PBX sends a SETUP message with channel identification 30 an...

...ted (38) /lib/modules/2.4.21-SAX/misc/wct1xxp.o: post-install wct1xxp failed /lib/modules/2.4.21-SAX/misc/wct1xxp.o: insmod wct1xxp failed Follows Cisco configuration: isdn switch-type primary-qsig isdn voice-call-failure 0 controller E1 2 framing NO-CRC4 clock source line primary pri-group timeslots 1-31 interface Serial2:15 no ip address isdn switch-type primary-qsig isdn overlap-receiving T302 2000 isdn incoming-voice modem isdn T310 40000 isdn send-alerting no cdp enable voice-port 2:D cptone BR I configured my /etc/zapata.conf: span=1,0,0,ccs,hdb3 nethdlc=1-15 Any clue? Than...

[Jul 2 09:31:16] VERBOSE[2682] logger.c: == Refreshing DNS lookups. [Jul 2 09:31:16] NOTICE[2682] dnsmgr.c: host 'outbound1.vitelity.net' changed from 64.2.142.17 to 64.2.142.29 [Jul 2 09:31:23] DEBUG[2711] jitterbuf.c: Attempting to exceed Jitterbuf max 600 timeslots And the calls are dropped. I fixed this by turning off enable in dnsmgr.conf My question is: Do you attempt to move existing connections when you see a DNS change or do you leave the existing connections the fnord alone on their current IP addresses and simply use the DNS change for new connect...

Hi everyone, This is just a reminder of our upcoming monthly meeting, on the 7th of September at 18:00 GMT - we've changed to a new timeslot for this month, so I thought it'd be worth reminding people a couple of days in advance. Hopefully the new time will be a little easier for most of our contributors and other interested parties to make it to. We've got a preliminary agenda at