search for: tftproot

I must be making some silly mistake. I can get the pxelinux.0 file to load, but cannot get the config file to load. I keep getting the message that it is trying to load a file from pxelinux.cfg. I have checked all the file permissions and other instructions. The tftpserver is running on Fedora 5. I have tried to load pxelinux on 2 completely different computers without success.

Hi, I would like to chainload syslinux 3.86 after booting from pxelinux of syslinux 6.04 is it possible? I was checking chain.c32, but i was not very successful so far. on my tftproot? dir i has this: pxelinux.0 boot/isolinux/ pxelinux.cfg/ isolinux_3.86/pxelinux.0 isolinux_3.86/boot/isolinux/ isolinux_3.86/pxelinux.cfg/ Does anyone know how i can, after booting from the tftproot pxelinux.0 (syslinux 6.04), chainload isolinux_3.86/pxelinux.0 and make isolinux_3.86/ the working...

Dear all, Inside the "HowTos/PXE/Gparted_PXE" wiki document, the "tftproot" directory should be "tftpboot", and the hyphens could be removed in the following line: Add the following lines to the pxelinux-configuration-file (/tftproot/pxelinux.cfg/default by default) Regards, Timothy Lee

...outers 192.168.16.1; } subnet 192.168.17.0 netmask 255.255.255.0 { option domain-name-servers 192.168.17.2, 192.168.17.3; option routers 192.168.17.1; } ### Static host assignments ### group { next-server 155.97.15.2; filename "/tftproot/pxelinux.0"; host test-01 { hardware ethernet xx:xx:xx:xx:xx:xx; fixed-address 192.168.15.10; } group { next-server 155.97.16.2; filename "/tftproot/pxelinux.0"; host test-02 { hardware ethernet xx:xx:xx:...

...AM, Leenders, Peter <Peter.Leenders at computacenter.com> wrote: > This look promising, if I could separate the config files for the different > boot architectures Bios and UEFI. I have 2 different boot files in 2 > different locations, but after startup they both refer to the > tftproot/pxlinux.cfg/default config file. The DHCP Option 209 may solve this > if the ZENworks tftp server support this option with different values > depending on the architecture. Unfortuanelly til now I didn?t found out if > there is a support for this option. No need. Again, you have choices....

...> PATH efi32 > INCLUDE common-config > PATH efi64 > INCLUDE common-config This look promising, if I could separate the config files for the different boot architectures Bios and UEFI. I have 2 different boot files in 2 different locations, but after startup they both refer to the tftproot/pxlinux.cfg/default config file. The DHCP Option 209 may solve this if the ZENworks tftp server support this option with different values depending on the architecture. Unfortuanelly til now I didn?t found out if there is a support for this option. > > For belonging ldlinux module the exten...

Tried to submit this email this morning and didn't see it in the list. I apologize if it is a dupe. I've inherited a customized Asterisk installation. After the past time change all clocks in my office are behind by one hour. After some digging it appears we have: A /tftproot/sip.conf that is being pushed out to our phones. I found the following line that seems to be what controls timezone information and DST. I put in carriage returns to make it easier to read as it is all one line. Can anyone see anything obvious (I have missed after reviewing many times) with this...

It took me forever to figure out why I couldn't tftp boot into memtest86+, I had the file "memtest86+.bin" installed into my tftproot, and it was being loaded when I selected that menu item, but it would result in a series of repeating numbers on the left hand side of the screen. Eventually, after trying a million different things, and then asking someone I know who has fought these problems in the past, he suggested that in th...

...unning memtest86+ 4.10 from the newest "Ultimate Boot CD" (isolinux i reckon?) the memtest runs without errors for several passes. But when loaded from PXELINUX it shows several hundred memory errors in just a few minutes. I double checked by copying the memtest-binary from the CD to the tftproot, but when started from PXE errors still occurred. My next try was updating pxelinux to 4.03, but this showed no change. Then the next try was 4.04-pre7, still the same. The motherboards are all Asus M4A89GTD/PRO USB3. and this is consistent on 5 different machines with the exact same hardware and...

..."Starting in syslinux 5.00, this bootloader requires additional modules to be loaded at runtime. Please see the syslinux.txt document for more general details." and them maybe suggest more specific hints per type, like: "For pxelinux this means you will also need ldlinux.c32 in the tftproot, and may need dependencies like libutil.c32 if you are using menu.c32." Having something like this would have saved me some time and frustration. Thanks, -- Matt Taggart taggart at debian.org

Hello all, At the end of README.menu there is : "... It is also possible to load a secondary configuration file, to get to another menu. To do that, invoke menu.c32 with the name of the secondary configuration file. LABEL othermenu MENU LABEL Another Menu KERNEL menu.c32 APPEND othermenu.conf" I'm unable to have such a conf. working. tftp logs shows

..." >&2; } die() { warn "$*"; exit 1; } debug() { if $debugging; then log "[DEBUG] %s" "$*"; fi } @@ -140,7 +141,7 @@ start_dnsmasq () { --dhcp-boot=tftpboot/pxelinux.0 --enable-tftp --tftp-root=${tftproot} - --log-facility=/tmp/dnsmasq-${nodename}.log + --log-facility=$WORKDIR/dnsmasq-${nodename}.log --log-queries --log-dhcp --pid-file=${pidfile}" @@ -180,7 +181,7 @@ start_networking () { local...

...about the later versions of > Cisco's SIP releases. > >? > > Now, when I need to do the upgrade for the Phone, then > I have to determine in the xml files the needed firmware? > > > > You should have, at least with firmware 8.5.2, the > following files in your tftproot directory after unzipping > the zip file: > > > > apps41.8-5-2TH1-9.sbn > > cnu41.8-5-2TH1-9.sbn > > cvm41sip.8-5-2TH1-9.sbn > > dsp41.8-5-2TH1-9.sbn > > jar41sip.8-5-2TH1-9.sbn > > SIP41.8-5-2S.loads > > term41.default.loads > > term61.defa...

...--bind-interfaces - --except-interface=lo - --dhcp-boot=tftpboot/pxelinux.0 - --enable-tftp - --tftp-root=${tftproot} - --log-facility=/tmp/dnsmasq-${nodename}.log - --log-queries - --log-dhcp - --pid-file=${pidfile}" + --dhcp-range=${NETWORK}.100,${N...

> I would like to chainload syslinux 3.86 after booting from pxelinux of > syslinux 6.04 is it possible? > Does anyone know how i can, after booting from the tftproot pxelinux.0 > (syslinux 6.04), chainload isolinux_3.86/pxelinux.0 and make > isolinux_3.86/ the working dir? Try using pxechn.c32 from the same version that you are booting with (6.04..., + libutil.c32 + libcom32.c32 from the same version) in order to chainload to a different network boo...

...tf \"${definition}\" > $pxedefault" +} + +# Starts a simple instance of dnsmasq. +# $1 - the iface on which dnsmasq works +# $2 - the root for tftp files +# $3 - the mac address for the node (ignored if blank) +# $4 - the nodename +start_dnsmasq () { + local iface=$1 + local tftproot=$2 + local macaddress=$3 + local nodename=$4 + local pidfile=$2/dnsmasq.pid + + stop_dnsmasq + debug "Starting dnsmasq" + dns_startup="sudo /usr/sbin/dnsmasq --read-ethers + --dhcp-range=${NETWORK}.100,${NETWORK}.254,255.255.255.0,24h +...

Thanks But how about the config files (SIP...) that needs to be inside the tftp server, where can I get a sample of that? That's where the images for the firmwares of the ip phones come from, on boot right? -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Alen Salamun Sent: Wednesday, January 26, 2005 5:47

Hi, HPA: Thanks for the nice new features, appreciate that. Syslinux is always a nice program. For the new version, 3.10-pre20, I encountered a problem now, my client machine uses sis900 chip, and it still can not run simple menu with pxelinux in this version (3.10-pre20). It's same situation as I encountered when I used syslinux 3.07, 3.08 and 3.09. For 3.10-pre20, I compiled in Fedora

On Dec 8, 2014 5:24 AM, "Leenders, Peter" <Peter.Leenders at computacenter.com> wrote: > > > Hello everyone, > > > > I'm using a windows PXE server and I try to upgrade a existing PXELINUX menu structure with actually with BIOS/Legacy mode to work in UEFI mode too. > > > > Since I have to use ZENworks tftp on the windows server I have only one

...eter.Leenders at computacenter.com> wrote: > > > This look promising, if I could separate the config files for the different > > boot architectures Bios and UEFI. I have 2 different boot files in 2 > > different locations, but after startup they both refer to the > > tftproot/pxlinux.cfg/default config file. The DHCP Option 209 may solve this > > if the ZENworks tftp server support this option with different values > > depending on the architecture. Unfortuanelly til now I didn?t found out if > > there is a support for this option. > > No need....