search for: technologically

*** Proceedings published by Springer and indexed by ISI, Scopus, EI-Compendex, DBLP, etc. --------------------------------------------------------------------------------------------------- MOSITS?17 ? The 2017 International Conference on Information Technology Science Moscow, Russia, 01 ? 03 December 2017 https://www.mosits.org/

*** Proceedings published by Springer and indexed by ISI, Scopus, EI-Compendex, DBLP, etc. --------------------------------------------------------------------------------------------------- MOSITS?17 ? The 2017 International Conference on Information Technology Science Moscow, Russia, 01 ? 03 December 2017 https://www.mosits.org/

To those of you who may be interested, to get SATA drives to work on this motherboard with Xen 3.3.1 (compiled from source) you need to set SATA to RAID mode in the BIOS, not the default IDE mode. So I can only assume that the 2.6.18.8 kernel has a problem with the VIA SATA in IDE mode, and can''t recognise it, even though the host OS (Ubuntu 8.04LTS, in my case) has no problems with it.

Hi, I have Sangoma A101DE 1 Port E1/T1 With Hardware Echo Cancellation ( PCI Express ) Card installed on the box. *Its not detected.* Details are as below :- [root at asterisk ~]# lspci 00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 01) 00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:04.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:05.0 PCI bridge: ATI

Hello, I have this problem - I have installation of Xen and Centos 5 (all RPMs are from Centos repositories). I have several DomU virtual machines running on this machine. When I try to copy some bigger amount of data from another physical computer to Dom0/DomU on this machine, the network freezes. The link is still up, I can see that the connection really links on the switch, but nothing is

I am installing dahdi on a machine lspci 00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge 00:01.0 PCI bridge: Hewlett-Packard Company Unknown device 9602 00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0) 00:05.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1) 00:06.0 PCI bridge: Advanced Micro Devices [AMD]

Dear All, I just upgraded my firewall/smarthost to a 2.6 GHz P4 on a Gigabyte board with the ATI RS350 chipset. Unfortunately the chipset isn't support on the kernel and I get slow disk performance lspci gives this: lspci 00:00.0 Host bridge: ATI Technologies Inc Radeon 9100 IGP Host Bridge 00:01.0 PCI bridge: ATI Technologies Inc Radeon 9100 IGP PCI/AGP Bridge 00:13.0 USB Controller: ATI

https://bugzilla.netfilter.org/show_bug.cgi?id=1167 Bug ID: 1167 Summary: Hacked By KingSkrupellos Cyberizm.Org Digital Security Technological Turkish Moslem Army Product: bugzilla Version: other Hardware: sparc64 OS: RedFlag Linux Status: NEW Severity: minor Priority: P5

On Thu, 2015-01-08 at 09:35 -0700, Warren Young wrote: > Once a thing becomes reliable, it stops being technology. Oh No. Just because something works well it does not stop being "technology" unless the USA people, who have decimated my language (English), have a new definition for "technology". Warren are you serious that things that do not work well are

The following errata for CentOS-2 have been built and uploaded the the centos mirror: RHSA-2004:494-01 Updated ImageMagick packages fix security vulnerabilities This package contains a fix for RedHat bug #62100:ImageMagick does not start from Gnome menu panel. The release number has been updated to indicate that this package has been modified for CentOS-2. Files available:

Hi, I have A101DE Sangoma Card( http://www.sangoma.com/products/hardware_products/digital_voice_and_data_networking/a101.html ) lspci shows as 03:04.0 Network controller: Sangoma Technologies Corp. A200/Remora FXO/FXS Analog AFT card [root at asterisk ~]# lspci -vvv -s 03:04.0 03:04.0 Network controller: Sangoma Technologies Corp. A200/Remora FXO/FXS Analog AFT card Subsystem: Unknown device

Hi, I have Sangoma A101DE 1 Port E1/T1 With Hardware Echo Cancellation ( PCI Express ) Card installed on the box. *Its not detected.* Details are as below :- [root at asterisk ~]# lspci 00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 01) 00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:04.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:05.0 PCI bridge: ATI

Anyone else seen this eth-device and what brings it up? [root at oh1mrr etc]# ifconfig __tmp1192348344 Link encap:Ethernet HWaddr 52:54:AB:DD:2E:D1 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2094689 errors:0 dropped:0 overruns:0 frame:0 TX packets:1645734 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX

The following errata for CentOS-2 have been built and uploaded the the centos mirror RHSA-2004:174 Updated utempter package fixes vulnerability RHSA-2004:178 An updated LHA package fixes security vulnerabilities RHSA-2004:219 Updated tcpdump packages fix various vulnerabilities John. -- John Newbigin - Computer Systems Officer School of Information Technology Swinburne University of

Hallo, the device is working without problems in the dom0, found from parport_pc: dmesg small2 snip: parport_pc: ITE8875 found (1P) parport0: PC-style at 0xf000 [PCSPP,TRISTATE,EPP] parport0: Printer, Kyocera FS-1700+ parport_pc: ITE 8872 parallel port: io=0xF000 parport1: PC-style at 0x378 [PCSPP,TRISTATE] snap to assign this device to a domU I gave the boot-parmaters

Hi - I am using centos 4.6 on an ebox 4300. Everything seems to be working except the /proc/interrupts rtc is always constant. On other machines the rtc (which ztdummy from asterisk) is always incrementing. the uhci_hcd and ehci_hcd are both running. What can cause this? Jerry -------------- 0: 274276 IO-APIC-edge timer 1: 9 IO-APIC-edge i8042 2: 0

I have a hardware here with 9 NICs (8 of them on-board) and I want to set up 8 NICs as real network interfaces, one for each xen domain. The 9th NIC should be Domain-0 which is working well. Currently I have only set up one domain which is running in bridged mode at the moment. I am currently trying to set up a second domain which uses eth2 but I didn''t succeed. I want to get the

I am running Wow 4.0.3 on Linux Mint 9 using Wine 1.2.1 I use PlayonLinux to manage Wine versions, and I have used up to 1.3.7, which I think is the most current version. Usually, it'll run OK. But I have run across several problems. 1. Logging on: When I log on, sometimes the computer will become completely non responsive. The cursor moves, bot the sound stops, no buttons can be pushed, and

I need to guarantee a Dial(Technology/resource,20) will ring somewhere for 20 seconds before timing out. The problem is that if all of my Technology/resource pairs are SIP phones for example, if none of the listed phones are actually online/logged in, the Dial bails immediately. I would rather the Dial run it's timeout course. Any way I can do that? Is there a way to create some kind of

Hi, I buyed a wildcard e100p and I installed that but when I load asterisk I have this error: Apr 29 18:59:25 WARNING[8192]: chan_zap.c:690 zt_open: Unable to open '/dev/zap/channel': No such device Apr 29 18:59:25 ERROR[8192]: chan_zap.c:5403 mkintf: Unable to open channel 1: No such device here = 0, tmp->channel = 1, channel = 1 Apr 29 18:59:25 ERROR[8192]: chan_zap.c:7526