Displaying 20 results from an estimated 37 matches for "te420".
Did you mean:
te410
2010 Nov 25
2
Timing cable usage necessity
Hello everyone.
I have a timing slips errors and I can't understand what source of the
problem is.
My installation has 2 digium cards: TE420 and TE220 cards in one server.
There are 3 spans (E1) to PSTN and 3 spans to internal PBS stations -
normal installation for transit communication.
Span configuration is:
span=1,1,0,ccs,hdb3 #TE420 - first port. To PSTN.
span=2,0,0,ccs,hdb3 #TE420 - second port. To PBX.
span=3,2,0,ccs,hdb3 #TE420...
2010 Mar 29
1
is it possible to connect Digium TE420 and Cisco card?
Hello,
I'm having problem connecting my Asterisk 1.4.29.1 with Digium TE420 to
providers Cisco 2800 with VWIC-1MFT-E1 card.
the same card runs fine with another E1 provider.
TE420 led's lite green.
Message type: RELEASE COMPLETE (90)
< [08 02 80 ac]
< Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0
Location: User (0)
<...
2011 Jan 05
0
TE420 issue: card 0 span N: isr2=XX isr3=Y
I have just built a new system using an HP DL360G7 with a TE420 T1 card,
and this is the first system using a generation 7 server. I'm not sure
whether that is an issue or not.
I am using Asterisk 1.2, and Zaptel 1.4.12.1 with patches for GEN5 of
the TE420 card. I have successfully used this combination on several
systems based on the DL360G6 and TE420(gen...
2009 Feb 26
3
HP DL380 G5 with TE420
Hi
I'm having problems getting the TE420 working in HP DL380G5 servers.
The cards don't seem to be detected 100% by the BIOS. With two cards in the
server they are never detected.
things I've tried:
1 Update firmware to latest (P56) for the server
2 change irq settings
3 disable all onboard devices on server and remove raid con...
2009 Jul 10
0
Dell poweredge T100 & TE420
Hi All
I am getting a strange prblem while installing TE420 on a Dell Poweredge T100 machine. I get a "TE4XXX: version Synchronisation error " nad the machine hangs which needs a hard reboot . Its a new machine and if i install TE410P then installation is successful. Strangely enough i have a working TE420F on another Dell POweredge T100 machine a...
2010 Jun 11
0
Using 5th gen TE420 with Asterisk 1.2?
...then wants registered product details before it
will let me enter a support request. Unfortunately, the card was
bought by my customer, not by me :-( So I'll just have to ask here...
</rant>
I am currently trying to replicate an existing system build using new
hardware, which includes a TE420 5th Generation. This is the first
time I have used a 5gen card.
The problem I have is that the system I am replicating uses Asterisk
1.2 and Zaptel (1.2 or 1.4). However, it appears that the 5g cards are
only supported under DAHDI, which in turn is not known about by
Asterisk 1.2
I have looked f...
2013 Nov 01
1
TE420, is it possible do disable span (red blinking)?
Hello!
Just got new server with TE420.
Not all four spans will be used immediately, but spans not configured or
not connected blink red light.
Is it possible to turn span off, so my colleagues will not eventally
tell me that something is wrong with asterisk? :-)
Thank you!
2010 Jul 14
2
beeping during call
Asterisk 1.4.32
dahdi-2.3.0.1
Centos 5.5
Digium TE420
CAC channel bank (2)
Cisco RVS4000 router
Cox 50 Mbps/ 5 Mbps cable modem
Flowroute provider
codac G-711
90 % CPU idle
callwaiting=no
When there are 10-15 or more calls up the farend hears a callwaiting
like beep every 3 to 6 sec. the duration of this "beep" is very short
and would be...
2014 May 30
1
Flashing Red Lights in TE420 (5th Gen) Card
I have the following software installed in a Centos Box with a TE420 (5th Gen) card.
. Centos 6.5 64-bit
. Asterisk 1.4.22
. dahdi-linux-complete-2.9.1.1+2.9.1
. libpri-1.4.14.
Even without plugging in the ISDN into span 1, all 4 spans are flashing red.
Plugging an E1 into span 1 makes no difference.
My system.conf is just simply:
loadzone=au
defaultzone=au
span=1...
2007 Jun 29
1
TE420 PCI Express Card
Hi,
Does anybody have any feedback on this new card from Digium? It was
announced a couple of weeks ago but now Digium said they ran out and is
no longer available for purchase via their web site. I find this kind
off odd. If they are out why don't they just says its on backorder or
something, rather than pulling it off completely from the store.
I am kind of hesistant at this point
2009 Jan 19
1
Server freeze & kernel panic
...of /var/log/syslog
kernel: [ 3821.982893] Uhhuh. NMI received for unknown reason 20.
kernel: [ 3821.982938] Do you have a strange power saving mode enabled?
kernel: [ 3821.982964] Dazed and confused, but trying to continue
dahdi_hardware
pci:0000:04:08.0 wct4xxp+ d161:0420 Wildcard TE420 (4th Gen)
pci:0000:06:08.0 wct4xxp+ d161:0420 Wildcard TE420 (4th Gen)
pci:0000:08:02.0 wct4xxp+ d161:0410 Wildcard TE410P (3rd Gen)
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/200901...
2009 Aug 06
6
E1 line simulation for Asterisk
Hello
I have recently configured TDM400P with four FXO ports.
My next requirement is to configure for E1 line. which contain 30
phone lines and 2 for signalling information.
The problem is I dont want to go for E1 line directly .....Is it
possible to get simulation for E1 line ... so that i can develop a
system for an E1 line.
--
Best Regards
Shakeel Abbas
2010 Jul 29
1
ignorant question about Digium cards and MeetMe
So historically I've done one of two things on systems where I've
needed to use MeetMe
* used a real Digium card, and I've only ever used a TE400 or a TE420
for that purpose, and I know they have the timing chip
* used dahdi_dummy, which works well with light load, but I had it
running on a very overloaded server and had audio quality issues. I
may have had quality issues even with a real Digium card, but it was
impossible to isolate the problem on an...
2012 Jan 12
1
Questions on hardware or software-based echo cancellation
Hi,
I'm having some questions related to echo cancellation configuration
on a Digium board enabled systems (B410P, TE420, TE420B, ....) for
cases when a hardware ech canceller is present or not.
I read in TEXXX manual that when setting echocancel=yes in
chan_dahdi.conf on a VPMOCT64-equiped system, 128ms hardware echo
cancellation was enabled.
1. I'm correct thinking that it is then impossible to switch from
ha...
2009 Aug 18
2
Channels don't go away with soft hangup
Hello List,
our setup:
Callcenter
IBM Hardware, 1x TE420, 1x xircom analog switch, 4x different cellular
providers on the xircom analog port, ~60 agents
Debian 5.0.1 (Lenny)
Asterisk 1.4.21.2 Debian Package recompiled with additional app_queue
segfault fix
Zaptel 1.4.11 Debian Package
My Problem is I have two channels (Zap/9-1 and Zap/6-1) which h...
2007 Dec 03
2
Red Alarm TE420 with E1s - R2
Dear members of the list,
I have difficulties to obtain sync with a Digium TE420 PCI Express
For four entries E1, In my case I am with only 3 E1s available to
configure. The
telephony operator is BrasilTelecom and Signaling is R2 Digital.
The information I have is that are E1s with 32 channels, not have
sure. My settings
Have been based on the link reference:
Http://www.vo...
2010 Jul 06
0
Problem with wct4xxp - cannot make calls
Hi,
I'm having problems with a TE420P card, in which I cannot make calls
using spans 2 through 4.
After a couple of days of working correctly, spans 2, 3 and 4 start
failing (can not make calls). The system is configured to work with SS7.
After the ACM message goes out, immediately a REL message is returned.
I searched for error...
2008 Apr 22
1
lots of warnings from translate.c
We have a couple of servers with asterisk 1.4.19 and zaptel 1.4.10,
acting as gateways from SIP to ISDN PRI interfaces. Each has one
Digium TE420 (with hardware echo cancellation) and one TC400B for
transcoding, in order to handle 60/90 contemporary calls in peak
hours.
In my logs there are hundreds of thousand warnigs per day like these:
transcode.c: no samples for lintoulaw
transcode.c: zapg729toalaw did not update samples ###
Could you...
2010 Jul 19
1
Problem with E1
Hi All,
I am facing problem with E1 line. I have installed Asterisk
(1.4.20.1) on a system with Digium TE420 card (Zaptel- 1.4.10)
But every
now and then I face problem of down E1's. The log show lot of entries like
"pri_dchannel: PRI got event: HDLC Bad FCS (8) on Primary D-channel of
span 2"
This happens on a regular basis and the E1 becomes up after some
time.
My zaptel.conf i...
2010 Oct 22
1
E1 and T1 on the same card, or on the same server
...was wondering if there
exists a card with both E1 and T1 on it. Or is it possible to use two
separate cards in an asterisk box, one for E1 and one for T1? (Please don't
mention aculab or adtran, dealt with them in the past, won't deal again.)
I talked to Digium and the sales guy said their TE420 card can *supposedly*
do it as it can have ports configured as a mix of E1s and T1s. Has anybody
used this card for the purpose of T1 to E1 conversion?
Regards
Zeeshan A Zakaria
--
www.ilovetovoip.com
www.pbxforall.com (beta)
-------------- next part --------------
An HTML attachment was scrubbe...