search for: te406p

Hi, I've installed an TE406p, asterisk1.2 on tyan opteron board. After installation there is no interrupts from TE406p. Is this board stable? Should i change * version to 1.0.9? Regards, Jason __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around...

Hello, Now that we've had our new Digium TE406P card in production for 4 days we have discovered audio drop problems that happen randomly across all channels. Here's more about our setup: P4-3.2GHz 2GB ram Slackware Linux 10.1 with custom kernel 2.4.29 Asterisk 1.2beta1 Digium TE406P quad T1 card with the following attached: - 2 x RBS D4/...

I am getting ready to purchase my first Digium card to start experimenting with Asterisk. Before I make my purchase, I wanted to make sure I'm not going to have issues with these cards (need to see what the specs are on my box, 5V or 3.3V PCI ). I will be using Asterisk @ Home, so will be Asterisk v1.0.9. I took a quick poke at the lists, and it appears several people have been having

I received a TE406P card from Digium yesterday and have done several tests on it and cannot get it working reliably with any Stable release or even CVS v1.0. What are other people that are using the TE406P card using for an Asterisk version? I tried 1.2.0 beta1 and it seemed to function well except for an unrelat...

I am having a problem with asterisk not being stable enough for production use. I have two cards, the digium TE406P, and the TE410P. The TE410P is the primary card that I am using but I would like to move to the TE406P for the echo cancellation and more flexibility of PCI slots available. General config info: 3 PRIs, configured as such: span=1,2,0,esf,b8zs span=2,0,0,esf,b8zs span=3,1,0,esf,b8zs span=4,0,0,e...

Hi Guys, I need your recommendation which card to buy?The TE411P or TE406P do they have any difference?I check their brochures they are differ only when it comes to PCI slot voltages.Which card best to use?Btw,Il be using supermicro board with 3.3V and 5.5V?Will il be experiencing problem during the implementation later on if i choose the wrong PCI voltage options?Will it...

I just wanted to post here and let everyone know that the TE406P (quadspan T1/E1 with hardware echo can) kicks some serious ass. We've been running a PRI now for over a year with Asterisk (every single call in and out is through two Asterisk boxes, including faxes) and while the software based echo cancellation is more than adequate, we'd get the oc...

...-----Original Message----- > From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users- > bounces@lists.digium.com] On Behalf Of Boris Bakchiev > Sent: Monday, 15 August 2005 18:17 > To: asterisk-users@lists.digium.com > Subject: [Asterisk-Users] Unable to load module for TE406P > > Hi, > > I'm unable to load wct4xxp module for TE406P card. > > I've compiled 2.6.13-rc6, got latest CVS (as of today) of zaptel, but > when I try to load the module I get this: > > kobject_register failed for Unified t4xxp/t2xxp driver (-13) > [kobject...

Hi all, I am having problems detecting fax on a client site using the TE406P (card with echo cancellation module) under 1.2 and was wondering if anybody was having or has had similar problems? Currently I can not get the system to detect fax for love nor money, in zapata.conf the relevant entries are set to: faxdetect=outgoing and I have a fax extension in the necessary co...

Hi, Does anyone know if it's possible to have 1 port of TE406P to provide T1 PRI to other VoIP gateways? I am trying to provide T1 PRI to one of our old Clarent gateways to integrate it to Asterisk. Can anyone help? Thank you. Andy

Guys, I'm trying to configure a TE406P with MFC/R2. here goes my zaptel.conf: span=1,0,0,ccs,hdb3,crc4 cas=1-15:1101 dchan=16 cas=17-31:1101 span=2,0,0,ccs,hdb3,crc4 cas=32-46:1101 dchan=47 cas=48-62:1101 The first strange behavior is that the: zap show status shows this: Description Alarms IRQ...

Hi, I'm unable to load wct4xxp module for TE406P card. I've compiled 2.6.13-rc6, got latest CVS (as of today) of zaptel, but when I try to load the module I get this: kobject_register failed for Unified t4xxp/t2xxp driver (-13) [kobject_register+53/73] kobject_register+0x35/0x49 [bus_add_driver+62/153] bus_add_driver+0x3e/0x99 [driver_re...

...onfiguration is pri----*(te405p)---iaxclient. My * version is 1.0.7 running on tyan dual opteron board. I have several problems. 1) inbound echo For outbound call(iaxclient-->pri), there is almost no echo. But for inbound(pri-->iaxclient), I can hear distinct echo. Can Sangoma a104 or digium te406p help this problem? 2)Today i received te406p. I know T1/E1 jumper. But how can i change the configuration of te406p for echo cancel mode selection? 3) asterisk crash (gdb) bt #0 0x0000002a973f15dd in q921_transmit_iframe (pri=0x2a9cd0ecf0, buf=0x40ffeac0, len=9, cr=1) at q921.c:384 #1 0x0...

Hi, we are currently considering different options for rolling out a large scale IP PBX to handle around 3,000 + concurrent calls. Can this be done with Asterisk? Has it been done before? I really would like an input on this. Thanks! -------------- next part -------------- An HTML attachment was scrubbed... URL:

Nobody has been able to answer this. Not even Digium at this stage, but I'm hoping someone here, smarter than I, will be able to. We are running some TE406P (upgraded 405Ps) cards performing mainly PRI bridged calls. After a server is brought up, calls sound absolutely perfect. Over time, delay (latency) creeps into the calls. What is really weird about that is apparently with the new Digium firmware, the native bridge is pushed down to the card,...

Hi Guys, Im planning to purchase Supermicro server but I dont have idea what Motherboard and chipset model will work with TE406P.I read one post here that the chipset should be Intel E7520.Is it true?Is there other recommendation?My requirement by the way is to handle 1000 simultaneous calls. Does dualcore xeon (single cpu) and 2gig memory can handle this w/o transcoding using sip?Any recommendation? Than...

Hi, I just read a pressrelease from VON that Digium will soon be releaseing a couple of new cards. What got me interested was: "The TE420P and TE415P support 128ms of G.168 (2002)-compliant echo cancellation across their entire 128 channels." Does anyone know when thease will be released and what they will cost when released? Thanks!

Hi, I bought a Digium Quad E1 card model TE406P. Till now, I can't make it work... I mean, I have red alarm when I configure one E1. The provider is in France (France T?l?com) and I use the following zaptel config : span=1,1,0,ccs,hdb3,crc4 bchan=1-15,17-31 dchan=16 I'm using Linux 2.6.15 and when I run ztcfg -vvvv, it seems tha...

I have an Asterisk sever running with a TE406P card, and 4 pri T1's. I am trying to findout how to send access codes to the switch. After a long distance call is dialed, we get a second dial tone and I need to enter a 4 digit access code, then the switch will place the call. Does anyone know how I can do this? Or does anyone know how to t...

Hi, Anyone using SpanDSP with Digium TDM o TE cards to receive and email Faxes? Thanks, Javier Ergas R. Director General de Tecnolog?a Pibix Telefon?a IP http://www.pibix.cl -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060615/ed77e5d1/attachment.htm