search for: te220s

Hi: I want to have conference call with asterisknow and need 2 ports E1.Which Digium card is better?TE212 or TE220.I haven't problem with motherboard. Regards. --------------------------------- Get the Yahoo! toolbar and be alerted to new email wherever you're surfing. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello! I am trying to configure my digium TE220 dual-span pci express card with Dahdi. I seemed to have managed to set up the card with the Dahdi kernel, as demonstrated by executing dahdi_scan: [1] active=yes alarms=RED description=T2XXP (PCI) Card 0 Span 1 name=TE2/0/1 manufacturer=Digium devicetype=Wildcard TE220 (4th Gen) location=Board ID Switch 0 basechan=1 totchans=31 irq=16

Hello folks. I've got a strange issue. When I modprobe TE220 I do not see mesages like Launching card: 0 <..> Setting up global serial parameters. You can see how I loaded and unloaded the card for several times - http://asteriskpbx.ru/pastebin/11 lspci can detect the card: 03:08.0 Communication controller: Digium, Inc. Device 0220 (rev 02) dahdi_hardware also: astpbx ~ # dahdi_hardware

Hi, Our potentiel next phone provider ask me a question i can't answer for sure, maybe someone here knows ? He says that is equipement only support VN4 protocol or more, or ETSI, however i can't find matching terms in the digium documentation or the chan_dahdi/dahdi/system.conf files... Any idea ? regards

Hello everyone. I have a timing slips errors and I can't understand what source of the problem is. My installation has 2 digium cards: TE420 and TE220 cards in one server. There are 3 spans (E1) to PSTN and 3 spans to internal PBS stations - normal installation for transit communication. Span configuration is: span=1,1,0,ccs,hdb3 #TE420 - first port. To PSTN. span=2,0,0,ccs,hdb3 #TE420 -

hi folks. i have a Digium TE220 PCI-E 2 port T1/E1 controller installed in an IBM x3400 server. i load the wct4xxp driver seems ok. but when i execute "ztcfg -vvv" command. the kernel panic. i tried zaptel 1.2.21 & 22. they have the same result. following is my zaptel.conf: loadzone=cn defaultzone=cn span=1,1,0,ccs,hdb3 span=2,0,0,esf,b8zs bchan=1-15 dchan=16 bchan=17-31

So historically I've done one of two things on systems where I've needed to use MeetMe * used a real Digium card, and I've only ever used a TE400 or a TE420 for that purpose, and I know they have the timing chip * used dahdi_dummy, which works well with light load, but I had it running on a very overloaded server and had audio quality issues. I may have had quality issues even with a

I am having a problem with a new PRI turn-up on dahdi 2.5.0 and asterisk 1.8.5 that I have not seen before. The PRI is setup as B8ZS, ESF and the span shows up and ok. This PRI is merely a crossover T1 going into an old DC0 class 5 switch. I am getting the following errors over and over again [Aug 16 10:26:10] NOTICE[8002]: chan_dahdi.c:3043 my_handle_dchan_exception: PRI got event: HDLC Bad FCS

Hello! At the end of year 2013 I had problem on my supermicro system with TE133, namely it losted connect to another system. So I opened case and finally card was replaced by TE220. Now I need to buy another 1 port card for almost the same supermicro. Could somebody tell me is this problem resolved? Thank you!

Hello I'd like to configure Asterisk so that... 1. I ring it from my cellphone with CID number displayed, just to notify Asterisk that I wish to make a call 2. Asterisk waits until I hang up, calls me back, and prompts me for the number I wish to call 3. Asterisk puts me on hold through Flash(), which is apparently the equivalent of hitting the R key on European handsets 4. Asterisk calls the

Hi all. I have this problem with my Digium 2E1 card and PRI, for hours It works well, with some meesages... [Aug 10 09:20:31] NOTICE[32270] chan_dahdi.c: PRI got event: HDLC Abort (6) on Primary D-channel of span 1 But PRI continue up....hours later... PRI go down. I thought the problem was in the telco, but the strange thing is that I have a loop cable in the second E1 and when I scan both E1

Hi, This is a bit of a long shot and I don't have much information on what is actually happening... Our production Asterisk system: ~2,000 SIP handsets, (2) Digium TE220s, Asterisk 1.6.2.18, RHEL 5 x86_64 Every few weeks, or few months, or X amount of time, the SIP portion of Asterisk seems to hang/die. Nothing abnormal in the typical Asterisk logs; the "rest" of Asterisk still seems to function fine -- incoming DAHDI calls come in and are queued in the v...

Hello, there has been a post to this list somewhere arount april which said that it is possible to use a Sangoma BRI A500 card with zaptel and asterisk bristuff. That is, without sangoma_brid and sangoma_mgd daemons and without woomera channels. Could anybody give me a short hint how to configure this? I tried wanpipe-driver + zaptel + asterisk-bristuffed, but I couldn't get zaptel to

I?ve got an interesting problem and am wondering if anyone can shed light ? I am running Asterisk on RHEL Server release 5.2 connecting to an Avaya Definity G3R via a Digium TE220. Asterisk 1.4.20 Zaptel 1.4.4 Libpri 1.4.4 MySQL 5.0.45 Festival Speech Synthesis System: 1.95 We have about 4200 accounts in a MySQL db. Asterisk retrieves the user information from the database, festival tts says

Hi list, After a lot of testing + troubleshooting, I guess I'm observing what I am now calling a regression with zaptel 1.4.10 (is it?) As such I call for peer feedback, before either asking Digium install support or filing a bug. Thanks in advance! System: HP Proliant DL380 G5 with 2x PCI-X + 1x PCIe riser card OS: Centos 5 Kernel: 2.6.18-53.1.14.el5 (also tested under

Hello, I have an Asterisk system in the UK using ISDN service from BT. My problem is that the called number is always passed to the provider with the Type Of Number declared as ?national? despite pridialplan (and prilocaldialplan) is set to ?unknown?. My questions are: - How can I find out what the effective value is for the above two variables without actually making a call? (I have very

I've seen this consistently on three systems, with three different cards, and multiple versions of DAHDI. At first I thought the issue only occurred on newer, Nehalem-based, systems, but I reproduced it on a Core 2 Duo box as well. I've tested with dahdi-linux 2.2.0.2, dadhi- linux-complete 2.0.0+2.0.0, 2.1.0.2+2.1.0.2, and 2.2.0.2+2.2.0. The card is a Digium TE220B which uses the

I have just installed DAHDI 2.10.0.1 on a system running CentOS 5.11 (let's not get sidetracked into discussing the version of CentOS - there are reasons for using it in this case). The system has a TE220 card with 2xE1. It has been working fine, but when booting, the udev startup gives out warnings about ATTRS{hardware_id} and ATTRS{location} not being found. After doing some research, I

Hi, Has anyone ever had any problem with the TE220B card with it showing up as four ports instead of two. I RMA'd the first one with the retailer (Digium tech advice), but I just got another brand new card and it is coming up as four ports again. The card identifier is showing 0420 when I do lspci. Has this happened to anyone and if so is there a fix? Remi

Dear all anybody have idea of this 2 card and performance vise which one is suggestable ??? ----PGP Signature-- Satish Patel mobile:- +91-9818875535 http://www.linuxbug.org --------------------------------- Be a better sports nut! Let your teams follow you with Yahoo Mobile. Try it now. -------------- next part -------------- An HTML attachment was scrubbed... URL: