Hello.
I've never used BRI but you can take a look to wiki.sangoma.com
You can kindly ask to them for support.
Good luck.
On Tue, Nov 18, 2008 at 5:45 PM, Claus Herwig <lists at checon.de> wrote:
> Hello,
>
> there has been a post to this list somewhere arount april which said
> that it is possible to use a Sangoma BRI A500 card with zaptel and
> asterisk bristuff. That is, without sangoma_brid and sangoma_mgd daemons
> and without woomera channels.
>
> Could anybody give me a short hint how to configure this?
>
> I tried wanpipe-driver + zaptel + asterisk-bristuffed, but I couldn't
> get zaptel to recognize the sangoma channels.
>
> modprobe wanpipe did load zaptel module and others but no spans appeared
> in /proc/zaptel or /etc/zaptel.conf.
>
> I tried various config options of the wanpipe setup tool, but to no avail.
>
> genzaptelconf -d displays correct cardinfo but doesn't seem to get the
> channels.
>
> Config:
> debian etch with kernel 2.6.18-5-amd64 on x86_64
> sangoma a503de (PCIe 6x BRI w/ Echo Cancel)
> asterisk 1.4.13-BRIstuffed-0.4.0-test4 (from pkg-voip.buildserver.net)
> zaptel 1.4.7 (from pkg-voip)
> wanpipe 3.3.14 (newest beta)
>
> Same config (without wanpipe of course) works well with a digium TE220
> (PCIe 2x PRI).
>
>
> Any hints would be greatly appreciated as I'm banging my head about
this
> for some days now ;-)
>
> Claus
>
> --
> CHECON EDV-Consulting und Redaktion
> Claus Herwig * Barer Stra?e 70 * 80799 M?nchen
> +49 89 27826981 * Fax 27826982 * c.herwig at checon.de
>
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20081119/3d2f2545/attachment.htm