hi folks. i have a Digium TE220 PCI-E 2 port T1/E1 controller installed in an IBM x3400 server. i load the wct4xxp driver seems ok. but when i execute "ztcfg -vvv" command. the kernel panic. i tried zaptel 1.2.21 & 22. they have the same result. following is my zaptel.conf: loadzone=cn defaultzone=cn span=1,1,0,ccs,hdb3 span=2,0,0,esf,b8zs bchan=1-15 dchan=16 bchan=17-31 fxoks=32-55 any clues? p.s. the same setting works fine on HP Proliant server. -- Edwin Lam <edwin.lam at officegeneral.com> Systems Engineer, Office General, Inc. Ph: +1 415 439 4988 Fax: +1 415 283 3370 http://pgpkeys.mit.edu:11371/pks/lookup?op=get&search=0xD6506D20
Edwin Lam wrote:> hi folks. > > i have a Digium TE220 PCI-E 2 port T1/E1 controller installed > in an IBM x3400 server. i load the wct4xxp driver seems ok. > but when i execute "ztcfg -vvv" command. the kernel panic. > i tried zaptel 1.2.21 & 22. they have the same result. > following is my zaptel.conf: > > loadzone=cn > defaultzone=cn > span=1,1,0,ccs,hdb3 > span=2,0,0,esf,b8zs > bchan=1-15 > dchan=16 > bchan=17-31 > fxoks=32-55 > > > any clues? > > p.s. the same setting works fine on HP Proliant server. >This looks like a really good reason to call Digium tech support :-) It's comes free with the purchase of the card. I haven't heard of anything like this, although posting your kernel panic output would help. But it would be best to handle this through tech support. -- Matthew Fredrickson Software/Firmware Engineer Digium, Inc.