search for: te110

Does anyone know of a way to simulate the signaling of a PRI trunk for testing/setup purposes? I realize this may be a rather naive question, but I was wondering if you could take a TE110, for example, and using a crossover cable (or not?) and some means of emulating the NI2 signaling protocol connect it to another TE110 on another machine to test and verify an installation before the telco comes out to provision our new trunks. Regards, /rg

Hello! I discovered, that I'm unable to load ther kernel module under 2.4.28. Before that I had 2.4.26 and tryed to upgrade the kernel to 2.4.28. After restart (reboot - soft restart) I can't load the module. When I go back to 2.4.26 and try to load the module, I'm getting the same problem. Only turning off/on helps. What can I do? It's very annoying because the box is in hosting

I just wanted to see if any one else has seen this or could help point me in the right direction on this problem. I have a TE411P card in my * box. I am running FC4 x86_64. I used to have two TE110 cards in the same box that worked without any problems. Since changing to the TE411P cards, I am getting random DTMF tones being produced on a bridged connection through the same Channel Bank that I was using before upgrading to the TE411P. Port 1 -> PRI 1 Port 2 -> PRI 2 Port 3 -> Cha...

Hey, I'm up and running fine with 30 Polycom 500s connected to Asterisk 1.2Beta on Cent OS 4.1 with a Digium TE110 connected to a PRI line. Nearly every hour, almost on the hour I get this: Sep 29 23:01:38 VERBOSE[3567] logger.c: -- B-channel 0/1 successfully restarted on span 1 Sep 29 23:01:38 VERBOSE[3567] logger.c: -- B-channel 0/2 successfully restarted on span 1 Sep 29 23:01:38 VERBOSE[3567] l...

Hi, Is there a simply way to allow dialout from ISDN modem to outside number through Asterisk? I've got an server with an Asterisk and the following cards: 1. TE110 -- to telco 2. TE400P with one FXS to analog phone 3. Two HFC-S based cards in NT mode I'd like to connect ISDN modem to one HFC-S card and allow dialout through TE100 to some external number (being more precisely, to some dumb bank which got only homebanking and no Internet banking). I've...

I'm little bit confused which Digium hardware is certificated for use in Europe. It looks like new cards are certificated, like TE4XX series. What about TE110 or TDM400P? Can someone confirm that? Thanks, David -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060309/1d1c65a1/attachment.htm

Hi I've bought the Wildcard TE110 some days ago but I'm unable to get it to work with Siemens HiCom 300. I've tried this so far: 1. I've used standard cat5 cable cut off on one edge and twisted wires 1 to 4 and 2 to 3 which is according to cisco a short circuit for E1 lines. Wildcard takes a few seconds and sets the...

...t solve it (although I think I have tried everything I can find.) I will try a post everything I think is possibly relevant that I can remember with the hope someone can point me in the right direction. current spec I am using (Trixbox 1.0 was still in beta at the time an didn't detect the TE110 card, and modules didn't load properly when I tried manually either ) Asterisk@home 2.8 Wildcard TE110P ISDN PRI card (set to E1, I live in the UK) Telewest Q931 ISDN connection (currently 8 lines 100 phone numbers) dell SC1425 server (3.2 Ghz, 512MB, 80GB) SIP phones aastra 9133i run 1.4.0 f...

Hi All; How to let the virualbox (ubuntu OS) to be able to see the digium card? Because when I install elastix or asterisk with dahdi, it is not able to see the digium card if the installation though the virualbox .. What is the solution? Regards Bilal

...t solve it (although I think I have tried everything I can find.) I will try a post everything I think is possibly relevant that I can remember with the hope someone can point me in the right direction. current spec I am using (Trixbox 1.0 was still in beta at the time an didn't detect the TE110 card, and modules didn't load properly when I tried manually either ) Asterisk@home 2.8 Wildcard TE110P ISDN PRI card (set to E1, I live in the UK) Telewest Q931 ISDN connection (currently 8 lines 100 phone numbers) dell SC1425 server (3.2 Ghz, 512MB, 80GB) SIP phones aastra 9133i run 1.4.0 f...

...call they get like silence between the sounds coming from the other party, almost like a cell phone, in other words if there is no sound coming from the other party it sounds like they have hung up, which is very annoying. The usres all use Polycom IP 501s connected to Asterisk which is running a a TE110, here is the configs from the Adit: ------------------------------------------------------------- -Adit 600 configuration file -Created on 01/04/2002 at 14:26:40 for root -This file is valid for the following configuration only: - - CardType - -------- -SLOT A T1x2 SW Versio...

I have a server running Asterisk 1.4.14, Zaptel 1.4.6, Libpri-1.4.2 on a CentOS 5 server. The server has a single TE110 card connected to a provider called Alestra in Monterrey, Mexico. Since we installed everything we have been having problems dialing certain numbers, those numbers always fail when dialed from Asterisk but if you dial from your cell phone they always go through. I once has a similar problem when...

Hi, I have to link an Asterisk Box with a PBX Matra 6501. System look like this : E1------Te110P Asterisk Te110P-----E1----Matra 6501-----Phones | | Ip Phones Incoming call from E1 will enter on asterisk, if incoming number is _800n then go to IP phones. In this case no problem. But if it's an another call i want to return call to my ol...

Hi Folks, I have a T100P ordered from Digium in the past. Its working perfectly fine but I now need to more the server to India (out-sourcing) and we will be getting an E1 line there. Does anyone know if T100P was capable (upgradeable) or swappable so that I could use it with the E1 lines instead? Any pointers to driver/firmware update would be highly appreciated. Thanks. R -------------- next

I encountered this strange problem which is I can call into Asterisk box but I cannot call out. I was successful before using exactly the same euroISDN line but with TE110 and different versions of Asterisk. This time, I am using: . TE410 . Asterisk 1.4.13 . Zaptel 1.4.6 . Libpri 1.4.2 1) I put the following into extensions.conf to get to the outside line exten => 0,1,Dial(Zap/1) 2) When I hit '0' on the phone, it came back like this on the console:...

..., etc), 256mb RAM, and a nice small (12 x 2 x 11) case (with 1 4cm fan)... They look like a good next step (or leap) up from a Soekris Net4801. I know that 1ghz C3 != 1ghz intel, but it's still probably better than a 266mhz Geode... I would love to try this board with Sangoma A101's, te110p's, and even some TDM4xx's, but if people out there already know that * is a bad fit here, I probably won't even bother and look elsewhere. Any tips, notes, caveats, etc from anyone? Anyone using any of the hardware I mentioned with one of these boards? Thanks! -- Kristian Kielh...

Hello, I am trying to get a Wildcard TE110P to work in a relatively modern HP Proliant DL385p Gen8 server. Being a potent 12 core Opteron server I expected no problems. Much to my dismay the dahdi_test results are constantly terrible: # dahdi_test Opened pseudo dahdi interface, measuring accuracy... 89.101% 89.195% 89.142% 88.957% 88.953...

Hello I am running Asterisk on SUSE Linux Professional 9.3 on a VIA Epia M Series motherboard - CPU runs at 1GHz. There is no fan - just a large heatsink. Currently system is running off standard IDE hard drive - because I couldn't get astlinux to run with my Digium TDM04B card (only PCI card in system). Strangely I also have the same system also running SUSE Linux running as a file

We've done a direct swap of an old Amanda voicemail system with a shiney new Asterisk system (Asterisk 1.0.9). The system consists of 4 FXO ports on the * box (TDM400P), and three old Wildcards we aren't using (too buggy we found). CO lines-> Toshiba -> FXO ports on * We want to branch out a little more and use it as an auto-attendant. The first problem seems to be an asterisk

Hi, I have been using asterisk for a couple of months now and for thee most part, I love it. However, I'm having a problem with the drivers of the Digium TE110P. I have tried both the Debian package and the CVS. I have tried several kernels, and am now at 2.6.11. This has been working before (with 2.6.8.1), but after a reboot it stopped working and I am not able to consistently make it work or fail. I have make clean, make and make install, no comp...