search for: tdmv_dchan

...HDB3 FE_FRAME = NCRC4 FE_LINE = 1 TE_CLOCK = MASTER TE_REF_CLOCK = 0 TE_HIGHIMPEDANCE = NO LBO = 120OH TE_SIG_MODE = CCS FE_TXTRISTATE = NO MTU = 1500 UDPPORT = 9000 TTL = 255 IGNORE_FRONT_END = NO TDMV_SPAN = 1 TDMV_DCHAN = 0 [w1g1] ACTIVE_CH = ALL TDMV_ECHO_OFF = NO TDMV_HWEC = YES # zaptel.conf loadzone=uk defaultzone=uk span=1,1,0,ccs,hdb3 bchan=1-31 ### ss7.conf [linkset-ennie] enabled => yes use_connect => yes enable_st => no hunting_policy => odd_lru subservice => auto...

...HDB3 FE_FRAME = CRC4 FE_LINE = 1 TE_CLOCK = NORMAL TE_REF_CLOCK = 0 TE_SIG_MODE = CCS TE_HIGHIMPEDANCE = NO LBO = 120OH FE_TXTRISTATE = NO MTU = 1500 UDPPORT = 9000 TTL = 255 IGNORE_FRONT_END = NO TDMV_SPAN = 1 TDMV_DCHAN = 16 TDMV_HW_DTMF = NO [w1g1] ACTIVE_CH = ALL TDMV_ECHO_OFF = NO TDMV_HWEC = YES wanpipe3 and 4: [devices] wanpipe3 = WAN_AFT_TE1, Comment [interfaces] w3g1 = wanpipe3, , TDM_VOICE, Comment [wanpipe3] CARD_TYPE = AFT S514CPU = A CommPort = PRI AUTO_PC...

...= 4 PCIBUS = 9 FE_MEDIA = T1 FE_LCODE = B8ZS FE_FRAME = ESF FE_LINE = 3 TE_CLOCK = NORMAL TE_REF_CLOCK = 0 TE_HIGHIMPEDANCE = NO LBO = 0DB FE_TXTRISTATE = NO MTU = 1500 UDPPORT = 9000 TTL = 255 IGNORE_FRONT_END = NO TDMV_SPAN = 7 TDMV_DCHAN = 0 TDMV_HW_DTMF = YES [w7g1] ACTIVE_CH = ALL TDMV_ECHO_OFF = NO TDMV_HWEC = YES Here is /etc/dahdi/system.conf loadzone=us defaultzone=us #Sangoma A104 port 3 [slot:4 bus:9 span:7] <wanpipe7> span=7,0,0,esf,b8zs fxols=145-164 fxsls=165-168 Here is /etc/asterisk/chan_dah...

...T S514CPU = A CommPort = PRI AUTO_PCISLOT = NO PCISLOT = 4 PCIBUS = 1 FE_MEDIA = T1 FE_LCODE = B8ZS FE_FRAME = ESF FE_LINE = 1 TE_CLOCK = NORMAL TE_REF_CLOCK = 0 TE_HIGHIMPEDANCE = NO LBO = 0DB FE_TXTRISTATE = NO MTU = 1500 UDPPORT = 9000 TTL = 255 IGNORE_FRONT_END = NO TDMV_SPAN = 1 TDMV_DCHAN = 0 [w1g1] ACTIVE_CH = ALL TDMV_ECHO_OFF = NO TDMV_HWEC = YES wanpipe2.conf: [devices] wanpipe2 = WAN_AFT_TE1, Comment [interfaces] w2g1 = wanpipe2, , TDM_VOICE, Comment [wanpipe2] CARD_TYPE = AFT S514CPU = A CommPort = PRI AUTO_PCISLOT = NO PCISLOT = 4 PCIBUS = 1 FE_MEDIA = T1 FE_LCODE...

...HDB3 FE_FRAME = NCRC4 FE_LINE = 1 TE_CLOCK = NORMAL TE_REF_CLOCK = 0 TE_SIG_MODE = CCS TE_HIGHIMPEDANCE = NO LBO = 120OH FE_TXTRISTATE = NO MTU = 1500 UDPPORT = 9000 TTL = 255 IGNORE_FRONT_END = NO TDMV_SPAN = 1 TDMV_DCHAN = 16 [w1g1] ACTIVE_CH = ALL TDMV_ECHO_OFF = NO TDMV_HWEC = YES thanks for your help. -- ------------------------------------------------------------ Erick Perez ------------------------------------------------------------ _______________________________________________ --Ba...

...HDB3 FE_FRAME = NCRC4 FE_LINE = 1 TE_CLOCK = NORMAL TE_REF_CLOCK = 0 TE_SIG_MODE = CCS TE_HIGHIMPEDANCE = NO LBO = 120OH FE_TXTRISTATE = NO MTU = 1500 UDPPORT = 9000 TTL = 255 IGNORE_FRONT_END = NO TDMV_SPAN = 1 TDMV_DCHAN = 16 [w1g1] ACTIVE_CH = ALL TDMV_ECHO_OFF = NO TDMV_HWEC = YES thanks for your help. -- ------------------------------------------------------------ Erick Perez ------------------------------------------------------------

...RC4 FE_LINE = 1 TE_CLOCK = NORMAL TE_REF_CLOCK = 0 TE_SIG_MODE = CCS TE_HIGHIMPEDANCE = NO LBO = 120OH FE_TXTRISTATE = NO MTU = 1500 UDPPORT = 9000 TTL = 255 IGNORE_FRONT_END = NO TDMV_SPAN = 1 TDMV_DCHAN = 16 TDMV_HW_DTMF = NO TDMV_HW_FAX_DETECT = NO [w1g1] ACTIVE_CH = ALL TDMV_HWEC = NO ==end wanpipe1.conf ==================== ==begin zapata.conf ==================== [trunkgroups] [channels] context=default usecallerid=yes hidecallerid=no callwaiting=yes usecalling...

...E1 FE_LCODE = HDB3 FE_FRAME = NCRC4 FE_LINE = 1 TE_CLOCK = NORMAL TE_REF_CLOCK = 0 TE_HIGHIMPEDANCE = NO LBO = 120OH FE_TXTRISTATE = NO MTU = 1500 UDPPORT = 9000 TTL = 255 IGNORE_FRONT_END = NO TDMV_SPAN = 1 TDMV_DCHAN = 16 [w1g1] ACTIVE_CH = ALL TDMV_ECHO_OFF = NO TDMV_HWEC = YES goksie

...= 1 TE_CLOCK = NORMAL TE_REF_CLOCK = 0 TE_SIG_MODE = CCS TE_HIGHIMPEDANCE = NO TE_RX_SLEVEL = 430 LBO = 120OH FE_TXTRISTATE = NO MTU = 1500 UDPPORT = 9000 TTL = 255 IGNORE_FRONT_END = NO TDMV_SPAN = 1 TDMV_DCHAN = 0 TDMV_HW_DTMF = NO # YES: receive dtmf events from hardware TDMV_HW_FAX_DETECT = NO # YES: receive fax 1100hz events from hardware [w1g1] ACTIVE_CH = ALL TDMV_HWEC = YES MTU = 8 /etc/dahdi/system.conf: defaultzone=be lo...

...ent [wanpipe1] CARD_TYPE = AFT S514CPU = A CommPort = PRI AUTO_PCISLOT = YES PCISLOT = 2 PCIBUS = 1 FE_MEDIA = E1 FE_LCODE = HDB3 FE_FRAME = CRC4 FE_LINE = 1 TE_CLOCK = NORMAL ACTIVE_CH = ALL TE_HIGHIMPEDANCE = YES MTU = 1500 UDPPORT = 9000 TTL = 255 IGNORE_FRONT_END = NO TDMV_SPAN = 1 TDMV_DCHAN = 0 [w1g1] ACTIVE_CH = ALL TDMV_ECHO_OFF = NO I start wanrouter, the card connected success, monitor on E10 exchange (ACATEL), the status of all channels are LIBR. when i dial to asterisk, error show as belows *CLI> Warning, flexibel rate not heavily tested! Rx CAS bits 0x9 [ 10000/ 0/...

...HDB3 FE_FRAME = NCRC4 FE_LINE = 1 TE_CLOCK = NORMAL TE_REF_CLOCK = 0 TE_HIGHIMPEDANCE = NO LBO = 120OH TE_SIG_MODE = CAS FE_TXTRISTATE = NO MTU = 1500 UDPPORT = 9000 TTL = 255 IGNORE_FRONT_END = NO TDMV_SPAN = 1 TDMV_DCHAN = 16 [w1g1] ACTIVE_CH = ALL TDMV_ECHO_OFF = NO TDMV_HWEC = NO Basically I only get channels 1 to 15 active in Asterisk. I am using wanpipe-2.3.4-3 with Zaptel 1.2.12 for this configuration and Asterisk 1.2.14. -- Telecomunicaciones Abiertas de Mexico S.A. de C.V. Carlos Ch...

...= E1 FE_LCODE = HDB3 FE_FRAME = CRC4 FE_LINE = 1 TE_CLOCK = NORMAL TE_REF_CLOCK = 0 ACTIVE_CH = ALL TE_HIGHIMPEDANCE = NO FE_TXTRISTATE = NO MTU = 1500 UDPPORT = 9000 TTL = 255 IGNORE_FRONT_END = NO TDMV_SPAN = 1 TDMV_DCHAN = 0 [w1g1] ACTIVE_CH = ALL TDMV_ECHO_OFF = YES ##EOF

I've been working with a telco for the past two days trying to get a PRI span up and running. This is a small-ish telco and I get the feeling they don't do this very often. Anyway, they specified a pretty standard setup: ni2 switchtype, esf framing, b8zs coding, etc. All of my b-channels are up, but we're having a heck of a time getting the d-channel to come up. He finds out that

Hey all, I had a user complaining of calls which were dropping mid-conversation. I looked into the time of one of the calls, and saw the following: Apr 4 12:13:03 WARNING[6670] chan_zap.c: No D-channels available! Using Primary channel 28 as D-channel anyway! Apr 4 12:13:05 WARNING[6660] channel.c: Avoided initial deadlock for '0x82b8430', 10 retries! Apr 4 12:13:05 WARNING[6660]

Following is my scenario to connect back to back PRI of two asterisk server. PRI cards are Sangoma A102D [Asterisk1]------------[PRI]-Cross Cable---------[Asterisk2] Asterisk1 ; Span 1 (MASTER) switchtype = national ; commonly referred to as NI2 context = from-pstn group = 0,24 echocancel = yes signalling = pri_net channel => 1-23 Asterisk2 ; Span 1 switchtype = national ; commonly

...U = A CommPort = PRI AUTO_PCISLOT = YES PCISLOT = 2 PCIBUS = 1 FE_MEDIA = E1 FE_LCODE = HDB3 FE_FRAME = NCRC4 FE_LINE = 1 TE_CLOCK = NORMAL TE_REF_CLOCK = 0 ACTIVE_CH = ALL TE_HIGHIMPEDANCE = YES FE_TXTRISTATE = NO MTU = 2100 UDPPORT = 9000 TTL = 255 IGNORE_FRONT_END = NO TDMV_SPAN = 1 TDMV_DCHAN = 0 [w1g1] ACTIVE_CH = ALL TDMV_ECHO_OFF = NO and my setting /etc/zaptel.conf # # Zaptel Configuration File # # This file is parsed by the Zaptel Configurator, ztcfg # # # First come the span definitions, in the format # span=<span num>,<timing>,<line build out (LBO)>,<frami...