Displaying 16 results from an estimated 16 matches for "tdm04".
Did you mean:
tdm04b
2005 May 19
2
Two TDM04 with Poweredge
Has anyone on this list succesfully managed to get two (or more) TDM04
(with four FXO each) working on a Dell PowerEdge server? If so, which
model? Was it a hassle? I'm doing a seven-line installation and a
callbank seems like overkill, I just don't want to get suck with a
PowerEdge that gets into an IRQ mess.
Thanks in Advance,
Tom Hayden
2010 Feb 03
5
Intel Atom based Asterisk server?
I currently have some Asterisk home servers on general pc hardware as well
as a mission critical server asterisk pbx running on a Dell 2850
To reduce noise and power consumption i would like to migrate them all to
an Intel Atom based solution, showstoppers so far were single NIC and
single PCI slot motherboards. I found that Supermicro makes a Dual NIC
board with one PCI slot and 2
2005 Mar 14
1
TDM400 audio problems
Sorry everyone, I know this has been hashed over a bunch of times but I
can't find anything that pertains to specific cracking and popping on the
FXO modules of a TDM04. This happens on inbound or outbound calls. This is
the first install I have done with a TDM card for FXO modules so please, be
kind if I am missing something really simple.
Damn I wish everyone wanted t-1's or pri's!
Everything sounds great UA to UA and the dialplan works but any calls...
2011 Jan 18
1
Ongoing problem with 1.8
I have tried installing many of the beta versions and most of the
release versions of 1.8. I have 3 SIP phones which we use for all our
calls. After installing 1.8 the first thing I try is calling out port
one of my Digium TDM04 back into port 2. I can see that the call
comes in and tries to call all three SIP phones but the phones never
ring. Eventually the call goes to voice mail and these error messages
pop up. I've read doc/sip-retransmit.txt and as far as I can tell,
there's nothing there for me to try.
I...
2009 Feb 12
1
1.6.1-rc1 errors
...Unable
to support trunking on user 'telecomab' without DAHDI timing
[Feb 12 12:32:33] WARNING[22261]: chan_iax2.c:10679 build_peer: Unable
to support trunking on peer 'telecomab' without a timing interface
I am using DAHDI 2.1.0.4, Asterisk 1.6.1-rc1 on a CentOS 5.2 machine
with a TDM04 card. These are the modules:
Module Size Used by
dahdi_echocan_mg2 9608 0
wctdm 39884 4
dahdi 190728 2 dahdi_echocan_mg2,wctdm
Where do I have to specify the timing module?
--
Telecomunicaciones Abiertas de M?xico S.A. de C.V.
C...
2006 Dec 14
3
(no subject)
Hello everyone! I'm planning on setting up a new system shortly and
can't pick the right card... We will have 2 or 3 lines coming in and
7 extensions (GXP2k's). Should I just get 2 or 3 X100P cards? Or do
I need the Sangoma A20200 or even the A20200D (Echo cancelation)...
I was thinking I'd use a Dell 2.0 GHz machine as the server... If
anyone has suggestions as to
2005 May 19
0
Re: Asterisk-Users Digest, Vol 10, Issue 154
..."Re: Contents of Asterisk-Users digest..."
Today's Topics:
1. Re: Grandstream ATA 286 and ilbc (Kevin McCauley)
2. Re: MusicOnHold probelms (admin)
3. RE: SIP Phone Recommendations? (Ariel Batista)
4. Re: Deleting Monitor Files After 2 Months (Steve Totaro)
5. Two TDM04 with Poweredge (Tom Hayden)
6. Re: Public vs. Private Network (Eric Wieling aka ManxPower)
7. Re: asterisk-oh323 build problems (VoIP Newbie)
8. Re: Outbound dialing issue with FXO (Johnathan Corgan)
9. RE: Two TDM04 with Poweredge (David Brodbeck)
10. RE: Re: Grandstream ATA 286 and...
2005 Oct 11
6
PRI echo issues: solvable?
Hello,
After solving the other "low hanging fruit" audio issues in our Asterisk
PBX, we are left with occasional cases of severe echo which we have not
found a solution for yet.
Our system:
- Asterisk 1.2.0-beta1
- TE110P on a PRI
- TDM04 and TDM40, but these are unrelated to current echo issues
- Fedora core 3
- Echo canceller KB1
Most calls have minimal, acceptable echo levels. But occasionally, we
get a call where the echo is delayed by a substantial amount (sometimes
around 250ms), and sounds as loud as the remote party.
One e...
2007 Mar 27
5
TDM400p reliability
What are peoples experience with the reliability of the TDM400p. Specifically in the 2 FXO, 2 FXS configuration, which is the 022 (?) model.
Is this board prone to random failures?
joe a.
2008 Feb 15
7
Digium stopped TDM400P production: alternatives??
Hi,
Digium stopped to produce TDM400P and the new TDM410 is too new to find
it in our shops. The only alternative available is a "fully-compatible"
Openvox product...but is it really "fully-compatible"? Any experience
about Openvox products (card and zaptel versions, etc...)?
Thank you!
Giorgio.
2005 Aug 22
7
Small office setup/using analog lines w/ Ast erisk
...nd after and see if it
makes any difference. If it does (i.e. ZTTEST yields ~98.X% before and
~99.X% after) then right there that's going to help.
I have used these statements in /etc/rc.d/rc.local to good effect (YMMV)
setpci -v -s 01:04:0 latency_timer=ff <--Specific statement for Digium
TDM04, you will have to do lspci -vv for the pci vendor id of your specific
Digium card
setpci -v -s XX:XX:X latency_timer=0 <-- Replace XX:XX:X with the PCI Vendor
ID of every other card that lspci -vv recognizes.
What the setpci statements do is allow the Digium cards to hog the bus more
than any...
2003 Feb 28
34
Newbie question
I have an ATA-186 in a SIP configuration (following Shawn Djernes
how-to), but I get the following error at the asterisk console when I
try to call the phone connected to the ATA:
ioctl(ZT_LOADZONE) failed: Inappropriate ioctl for device
Failed to register zone 'United States / North America': No data
available
Everything works if I remove indications.conf from /etc/asterisk -
2006 Feb 12
6
Best quad-port fxo solution with EC?
Hello All,
I am trying to figure out which way to go for a quad port fxo solution
with a good echo can on it. My options are the sangoma remora, a
mediatrix fxo, or something similar.
The issue is that I would need a good EC. This would be on about a 9000
foot loop, and the lines don't function well on a spa-3000 or zaptel tdm
4 port card.
Anyone have experience that drives them in a
2005 Sep 14
7
Asterisk 1.0.9 long term stability <--thread hijack, why not reboot?
Disclaimer: Not a troll
I'm curious as to this obsession with uptime is. All of the posts of this
type are along the lines of "After X days, Y thing does not work but if I
reload or reboot, it's OK" - so why not cron a reboot? Is it considered bad
form or something like that? I reboot every night whether it is needed or
not, not afraid to admit it, and everything works fine for
2005 Jun 30
7
passing through MWI info from SBC
Hi.. I am about to replace my aging Nortel Venture
system with an Asterisk system and 6 Polycom IP 501
phones, and a couple sipura 841's for less used areas.
We have 3 phone lines here. One is SBC, one Vonage,
and one Voipjet... One hangup is that I can't figure
out how to pass through a voicemail waiting indication
from SBC. This is important because my wife and her
family all
2006 Feb 21
17
What business IP phone to use
I have been struggling with this issue for about a year now. There were
just too many IP phones to choose from at all sorts of price points and not
enough information about any of them. Now I am looking at the situation
again and if anything it has gotten worse. There are even more phones and
all sorts of opinions. For every person that says phone x is great there is
someone else complaining