Displaying 17 results from an estimated 17 matches for "t310".
Did you mean:
310
2011 Mar 23
4
Install on Dell PowerEdge T310
Hi,
this is the first time I install linux on a dell server. Simply I
booted from a centos 5.5 x64 dvd but I cant see the disks.. is there
something I miss ?
thanks very much for any help
luigi
2011 Apr 14
7
[OT] ups advice
Hi
I have a Dell PowerEdge T310 *tower* server.. I have to buy an ups by
apc... anyone could help me giving an hint ?
a simple "smart ups 1000" could be enough ?
thx so much!!
lewis.
2010 Feb 05
5
VMWare ESXi & CentOS5.4
I have a brand new Dell Poweredge T310 server with 4G ram and 1TB
raid-5 hard drive in it. I Really only need to be able to run a copy
of CentOS 5.4 on it, but I'm wondering if in the build process should
I stick on ESXi 4 and then run CentOS as a vm? This would give me the
options to roll out other VM's if I want over the life...
2011 Aug 14
2
hardware isues
I have a broadcom bcm5722 and a dual intel pro/1000 pt nic in a dell
t110. The setup sees the cards and i put them into automatic mode.
After the install no cards are detected at all. Astaro 8.01 detects and
utilizes all of these cards just fine. I have also tried ubuntu server
10.04 lts and they work fine. I'm curious if this is a bug with Centos 6?
2003 Dec 19
1
E100P connected to Cisco
...isco configuration:
isdn switch-type primary-qsig
isdn voice-call-failure 0
controller E1 2
framing NO-CRC4
clock source line primary
pri-group timeslots 1-31
interface Serial2:15
no ip address
isdn switch-type primary-qsig
isdn overlap-receiving T302 2000
isdn incoming-voice modem
isdn T310 40000
isdn send-alerting
no cdp enable
voice-port 2:D
cptone BR
I configured my /etc/zapata.conf:
span=1,0,0,ccs,hdb3
nethdlc=1-15
Any clue?
Thanks in advance,
Daniel
2010 Feb 08
4
Experiencing continual eth0 link up/down on a 10G Chelsio NIC (cxgb3 driver)
File Server OS: CentOS 5.3 (x86_64)
Kernel: CentOS Plus kernel (need XFS fs drivers)
The file server has a Chelsio T310 10GBASE-CX4 RNIC (rev 3) PCI
Express x8 MSI-X (eth0), driver and firmware is stock from the CentOS
Plus kernel.
Using ethtool I have verified driver association with the 3 NICs on
the system (eth1 and eth2 are not connected to any switch)
Driver for eth0
driver: cxgb3
version: 1.1.3-ko
firmware-...
2004 Oct 06
2
Cisco router for PRI termination?
If you have a PRI terminated in a Cisco router talking SIP to * and would
be willing to share your Cisco config, please respond. Also, I would be
interested in knowing what version of IOS you are using. We are using an
NM-HDV in a 3640.
TIA
Bruce Komito
High Sierra Networks, Inc.
www.servers-r-us.com
(775) 236-5815
2012 May 29
7
efibootmgr not working on xen-unstable booted on uefi system
I have installed dom0 Wheezy 64 bit on Dell PowerEdge T310 with kernel from
package and xen-unstable. System is in Uefi mode and booted with
grub-efi-amd64.
Booting without xen efibootmgr works, while with xen not, efivars kernel
module is loaded but show this message:
efibootmgr
Fatal: Couldn''t open either sysfs or procfs directories for accessi...
2010 Dec 01
0
Xentop not work and do segfault
Dom0 is on Dell T310, Lenny with kernel 2.6.32.26 for jeremy git (commit
b92d1ec0a86acd2dfe14d732c6a9304aae0ccf26) and xen 4.0.1
After double bridge with this config xentop not work and do segfault:
-----------------------------------
/etc/xen/xend-config.sxp
---
(network-script network-bridge-double)
-----------------...
2005 Aug 11
1
PRI dropped calls w/ asterisk dropped betweenpstn & norstar
...erisk-Users] PRI dropped calls w/ asterisk dropped
> betweenpstn & norstar
>
>
> I poured over my logs most of the morning. I'm fairly convinced at
> this point the disconnect is coming from the Norstar 10 seconds after
> the call was initiated. This points to the 'T310' timer, similar to
> what is described here:
> http://www.cisco.com/en/US/tech/tk652/tk701/technologies_tech_
> note09186a0080094487.shtml
> for the Cisco CallManager.
> When comparing the log from a successful call to a failed call, I
> noticed Asterisk was not passing back c...
2009 Dec 22
2
E1 R2 Congestion Status
...N200 = 3
N201 = 260
T200 = 1 seconds
T203 = 10 seconds
ISDN Layer 3 values
T301 = 180 seconds
T303 = 4 seconds
T304 = 20 seconds
T305 = 30 seconds
T306 = 30 seconds
T308 = 4 seconds
T310 = 10 seconds
T313 = 10 seconds
T316 = 120 seconds
T322 = 4 seconds
T309 = 90 seconds
N303 = 1
---------------------------
/etc/asterisk/chan_dahdi.conf
[trunkgroups]
signalling=mfcr2
mfcr2_variant=mx
trunkgroup => 1,16
spanmap => 1,1...
2006 Jun 08
1
FW: asterisk and nortel meredian option 11c
Hi
I want to connect asterisk 1.0.9 ( kernel 2.6.8-2 debian )with TE110P
and Nortel meridian option 11c release 25.40 with NTBK50AA card which is
An E1 card. But the main problem is the first stage that no sync occurs
the * card never syncs with meridian card
I am using euroisdn, ccs , hdb3, crc4 , pri_net on asterisk
And I am assuming that meridian is using same as it is
2006 Apr 12
1
ASterisk Back2back
...age in cisco as5300 after make a call, if used debug isdn q931
in cisco AS5300 config :
isdn siwtch-type primary-net5
controller e1 0
framming crc4
linecode hdb3
pri-group 1-31
interface serial0:15
isdn switch-type primary-net5
isdn incomming-voice modem
isdn T310 60000
dialpeer,.....blah,...blahh
thanks for ur help
Dirgan
Send instant messages to your online friends http://asia.messenger.yahoo.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/a...
2007 Jan 24
0
NewTopic - Asterisk and Cisco AS5300 via E1/PRI
...group timeslots 1-31
!
gw-accounting h323
gw-accounting h323 vsa
gw-accounting voip
!
!
interface Ethernet0
no ip address
no ip route-cache
no ip mroute-cache
shutdown
!
interface Serial1:15
no ip address
isdn switch-type primary-net5
isdn incoming-voice modem
isdn T321 40000
isdn T310 4000
isdn negotiate-bchan
no cdp enable
!
interface Serial3:15
no ip address
isdn switch-type primary-net5
no cdp enable
!
interface FastEthernet0
ip address 192.168.0.3 255.255.255.0
no ip route-cache
no ip mroute-cache
duplex full
speed auto
!
ip classless
ip route 0.0.0.0 0.0...
2003 Jul 30
16
Need help
I do part time consulting work. I need to setup an asterisk system to
allow me to record both inbound and outbound calls to clients. I have one
client that is just a PITA. The client has changed their mind three times
so far and we are at step one.
I have a spare slackware box and a seperate phone line for the consulting
work. I have MCI Neighorhood as my carrier.
What I need to know is:
1.
2004 Jan 12
1
E100P - connected to Cisco
...tyle=""> </span>isdn
T306 3000<o:p></o:p></span></font> <br>
<font size="2"><span lang="EN-US"
style="font-size: 10pt; font-family: Arial;"><span style=""> </span>isdn
T310 60000<o:p></o:p></span></font> <br>
<font size="2"><span lang="EN-US"
style="font-size: 10pt; font-family: Arial;"><span style=""> </span>isdn
<span class="SpellE">bchan</span&...
2004 Jan 10
0
E1 - E100P connected to Cisco - problem - HELP
...tyle=""> </span>isdn
T306 3000<o:p></o:p></span></font> <br>
<font size="2"><span lang="EN-US"
style="font-size: 10pt; font-family: Arial;"><span style=""> </span>isdn
T310 60000<o:p></o:p></span></font> <br>
<font size="2"><span lang="EN-US"
style="font-size: 10pt; font-family: Arial;"><span style=""> </span>isdn
<span class="SpellE">bchan</span&...