search for: su1500rtxl2ua

I am trying to get a TrippLite SU1500RTXL2Ua working with nut on Mandriva 2007.1, is there a particular version of nut needed to get this to work? At first I tried nut 2.0.5 (which came with 2007.1) but it wouldn't work, and then research showed it was an older version of nut. So nut-2.2.1-2 src rpm was pulled from Mandriva 2008.1, the b...

...200XLA into nut-2.4.3 as follows: --- ./drivers/tripplite-hid.c.0 2010-03-03 15:53:20.000000000 -0500 +++ ./drivers/tripplite-hid.c 2010-03-03 15:53:40.000000000 -0500 @@ -81,6 +81,8 @@ { USB_DEVICE(TRIPPLITE_VENDORID, 0x4002), battery_scale_1dot0 }, /* e.g. TrippLite SmartOnline SU1500RTXL2ua */ { USB_DEVICE(TRIPPLITE_VENDORID, 0x4003), battery_scale_1dot0 }, + /* e.g. TrippLite SmartOnline SU2200XLA */ + { USB_DEVICE(TRIPPLITE_VENDORID, 0x4004), battery_scale_1dot0 }, /* HP R/T 2200 INTL (like SMART2200RMXL2U) */ { USB_DEVICE(HP_VENDORID, 0x1f0a),...

To all, I attempted to configure the UPS tools for the Tripp-Lite SmartOnline 1500VA 2U rackmount UPS. I followed the instructions from the 'upsdrvctl start' output and posted the diagnostic information below. Is my UPS using an unknown product ID as reported? From the mailing list archive, I have found another posting for the same UPS with device model '09AE/4003', whereas

...ollers had better luck than USB3 controllers, even on non-superspeed ports). David mentioned your model is likely protocol 4004. Here are other compatibility reports with that protocol ID: * https://networkupstools.org/ddl/Tripp_Lite/SU1000RTXL2UA.html * https://networkupstools.org/ddl/Tripp_Lite/SU1500RTXL2UA.html * https://networkupstools.org/ddl/Tripp_Lite/SU1500RTXLCD2U.html * https://networkupstools.org/ddl/Tripp_Lite/SU1000XLA.html * https://networkupstools.org/ddl/Tripp_Lite/SU2200XLA.html Seems like a good choice to me, based on the available information. Of those, the 1500s seem to have the mos...

I'm having trouble with a TrippLite SU3000XLCD. I'm using a Raspberry Pi running Raspbian (wheezy) with NUT 2.6.4. I can monitor my older TrippLite UPSs, mostly SU1000RT2Us, with this Pi and a USB to serial adapter. My first thought with the SU3000XLCD was to use the USB port instead of the serial port as that's the "modern" thing to do. When I plugged the USB cable in

We're looking at replacing some old APC SmartUPS 5000s with something that has USB so NUT can more easily talk with it (and yes, I've tried USB-RS232 adapters and every one I tried started kicking out errors within a few hours). One of the bids we have is for a "Tripp Lite UPS Smart Online 5000VA 4500W Rackmount 5kVA 200V/240V" as the potential replacement unit. I have no

Good afternoon all, I have a Tripp-Lite SmartOnline SU1500RTXL2ua UPS that I had previously tried to get up and running with NUT earlier this year. Peter Selinger had been working with this, but he had to devote time to more important things, and I did too, so it got pushed to the back burner. I saw in the release announcement of 2.2 that the UPS is now suppo...

...m doing this right. I assume this is the correct place to post this message. I will start with the equipment I have. I am using Debian Sarge (3.1 I think - it is the latest stable release) on a Toshiba A10-S169 laptop. The laptop does not have a serial port. The UPS is a Tripp-Lite SmartOnline SU1500RTXL2ua. I also have access to another similar laptop running WXP Pro (an A10-S100). Steps I have taken: I loaded just a bare-bones system and compiled a 2.6.17 kernel with what I believed were all the proper options for USB support (I used 2.6.17 to get the latest toshset utility to work). I then ins...

...offer hints or suggestions. I will be more than happy to provide additional info if requested. One further note, I performed a SVN update this morning, but the results are still the same (my output below is the most recent). Thanks, Patrick Info and output: The ups is a Tripp Lite SmartOnline SU1500RTXL2Ua. The laptop is running Debian Sarge which is current as of about six weeks ago (Jan 15th or so). Config files are as follows... ups.conf: [su1500] driver=usbhid-ups port=auto desc="Tripp-Lite SU1500RTXL2Ua" upsd.conf: ACL all 0.0.0.0/0 ACL localhost 127.0.0....