search for: stop_tone_after_first_digit

...ext: [intern] exten => _X.,1,Macro(dial) How is this done properly with misdn? Thanks, Arik PS: I am using the following options in misdn.conf (basically they are the defaults): [general] misdn_init=/etc/misdn-init.conf debug=0 ntdebugflags=0 ntdebugfile=/var/log/misdn-nt.log bridging=no stop_tone_after_first_digit=yes append_digits2exten=yes dynamic_crypt=no crypt_prefix=** crypt_keys=test,muh [default] context=misdn language=de musicclass=default senddtmf=yes far_alerting=no allowed_bearers=all nationalprefix=0 internationalprefix=00 rxgain=0 txgain=0 te_choose_channel=no pmp_l1_check=yes need_more_infos=n...

...,45,tTwW) exten =>_9XXXXXXXX,2,Hangup() exten =>_9XXXXXXXX,102,Hangup() [default] exten => s,1,Answer() exten => s,2,Wait(1) exten => s,3,Dial(SIP/101,30,Ttm) misdn.conf: [general] misdn_init=/etc/misdn-init.conf debug=0 ntdebugflags=0 ntdebugfile=/var/log/misdn-nt.log bridging=no stop_tone_after_first_digit=yes append_digits2exten=yes dynamic_crypt=no crypt_prefix=** crypt_keys=test,muh [default] context=misdn language=es musicclass=default senddtmf=yes far_alerting=no allowed_bearers=all nationalprefix=0 internationalprefix=00 rxgain=0 txgain=0 te_choose_channel=no pmp_l1_check=no reject_cause=16 ne...

...I> misdn show stacks BEGIN STACK_LIST: * Port 1 Type TE Prot. PMP L2Link DOWN L1Link:DOWN Blocked:0 Debug:0 /etc/misdn-init.conf: card=1,hfcpci te_ptmp=1 poll=128 dsp_poll=128 dsp_options=0 dtmfthreshold=100 debug=0 /etc/asterisk/misdn.conf: [general] debug = 0 method=standard bridging=no stop_tone_after_first_digit=yes append_digits2exten=yes dynamic_crypt=no crypt_prefix=** crypt_keys=test,muh [default] context=misdn language=en musicclass=default senddtmf=yes far_alerting=no allowed_bearers=all nationalprefix=0 internationalprefix=00 rxgain=0 txgain=0 te_choose_channel=no pmp_l1_check=no reject_cause=16 ne...

...Debug ; 1 - mISDN Messages and * - Messages, and * - State changes ; 2 - Messages + Message specific Informations (e.g. bearer capability) ; 3 - very Verbose, the above + lots of Driver specific infos ; 4 - even more Verbose than 3 ; debug=3 ; ; Stops dialtone after getting first digit on nt Port ; stop_tone_after_first_digit=yes ; ; Wether to append overlapdialed Digits to Extension or not ; append_digits2exten=yes ; users sections: ; ; name your sections as you which but not "general" ! ; the secions are Groups, you can dial out in extensions.conf ; with Dial(mISDN/g:extern/101) where extern is a section nam...

...(section: general) invalid or out of range. Please edit your misdn.conf and then do a "misdn reload". I don't understand because the parameters : - use_callingpres - presentation - dialplan are set in the correct section.. My misdn.conf : [general] debug=4 append_digits2exten=yes stop_tone_after_first_digit=yes bridging=yes use_callingpres=yes presentation=allowed diaplan=0 [default] context=default language=fr nationalprefix=0 internationalprefix=00 rxgain=0 txgain=0 [TEports] context=isdn-incoming method=round_robin ports=2,7,8 callgroup=1 msns=5500,5501,5502,5503,5504,1812,1813,1814,1815,1816,560...

...keep mail size reasonable. /etc/misdn-init.conf: card=1,0x4,dtmf te_ptmp=1,2 nt_ptmp=3,4 option=1,master_clock poll=128 dsp_poll=128 dsp_options=0 dtmfthreshold=100 debug=0 misdn.conf: [general] misdn_init=/etc/misdn-init.conf debug=1 ntdebugflags=0 ntdebugfile=/var/log/misdn-nt.log bridging=yes stop_tone_after_first_digit=yes append_digits2exten=yes dynamic_crypt=no crypt_prefix=** crypt_keys=test,muh [default] context=default language=en musicclass=default senddtmf=yes far_alerting=no allowed_bearers=all nationalprefix= internationalprefix=00 rxgain=0 txgain=0 te_choose_channel=no pmp_l1_check=yes reject_cause=16 n...

...digits) in Asterisk but the old PBX got all the DNID number so I think it is the card. Is there anybody experiencing a problem like this? How can I solve it? Any ideas? TIA Giorgio Incantalupo Follows my misdn.conf: [general] debug = 0 tracefile = /var/log/asterisk/misdn.trace bridging = yes stop_tone_after_first_digit = yes append_digits2exten = yes dynamic_crypt = no crypt_prefix = ** crypt_keys = test,muh ; users sections: ; ; inbound group ; [inbound] ports = 1ptp,2ptp,3ptp,4ptp,5ptp,6ptp,7ptp,8ptp context = outbound_isdn msns=* musicclass = native method = standard need_more_infos=yes

...1072) inbuf(0x9eff060) irp(0x9eff060) iend(0x9eff060) [root@gateway ~]# [root@gateway ~]# cat /etc/misdn-init.conf card=1,0x4 te_ptmp=1,2 poll=127 dsp_poll=128 dsp_options=0 dtmfthreshold=100 debug=5 [root@gateway ~]# cat /etc/asterisk/misdn.conf [general] debug = 0 method=standard bridging=no stop_tone_after_first_digit=yes append_digits2exten=yes dynamic_crypt=no crypt_prefix=** crypt_keys=test,muh [default] context=misdn language=it musicclass=default senddtmf=yes far_alerting=no allowed_bearers=all nationalprefix=0 internationalprefix=00 rxgain=0 txgain=0 te_choose_channel=no pmp_l1_check=no reject_cause=16 ne...

...ryone, I'm having some issues connecting a Asterisk box to a old ISDN PBX. Everything works fine but the undetermined digits rules. For instance, if I have _00X. and I start dialing for instance 0035..., Asterisk just get the 4 first numbers and starts dialing 0035. I've tried adding: stop_tone_after_first_digit = yes append_digits2exten = yes Although I believe these are the defaults. I was wondering if something like Set(TIMEOUT(digit)=5) would work in this situation. Has anyone had a similar problem? If so, how did you work around it? Thanks in advance, Best regards, Paulo Santos

...e relevant part of the misdn-init.conf card=1,hfcpci te_ptp=1,2 poll=128 dsp_poll=128 dsp_options=0 dtmfthreshold=100 debug=0 And this is the misdn.conf [general] misdn_init=/etc/misdn-init.conf debug=0 ntdebugflags=0 ntdebugfile=/var/log/misdn-nt.log ntkeepcalls=no bridging=no l1watcher_timeout=0 stop_tone_after_first_digit=yes append_digits2exten=yes dynamic_crypt=no crypt_prefix=** crypt_keys=test,muh [default] context=misdn language=en musicclass=default senddtmf=yes far_alerting=no allowed_bearers=speech,3_1khz nationalprefix= internationalprefix=0 rxgain=0 txgain=0 te_choose_channel=no pmp_l1_check=no reject_cau...

Hello everybody. I am trying to configure an Asterisk on Debian with the Billion ISDN card. I am using mISDN. But when I call on the CLI apears this: -- Executing Dial("SIP/101-081805b8", "mISDN/1/943833473|45|tTwW") in new stack -- Called 1/943833473 P[ 1] empty_chan_in_stack: cannot empty channel 255 P[ 1] --> we have already send Release_complete == Everyone is

...sk-1.4.15 ******************** SOFTWARE misdn is correctly loaded by misdn-inist start Here there is the misdn.conf (copied from an existing and working installation with Asterisk 1.2.x and one BN8S0) ******************** MISDN.CONF [general] misdn_init=/etc/misdn-init.conf debug=0 bridging=no stop_tone_after_first_digit=yes append_digits2exten=yes dynamic_crypt=no crypt_prefix=** crypt_keys=test,muh jitterbuffer=4000 jitterbuffer_upper_threshold=0 context=misdn language=en musicclass=maracaibo senddtmf=yes far_alerting=no allowed_bearers=all nationalprefix=0 internationalprefix=00 rxgain=0 txgain=0 te_choose_chann...

...he culprit (not sure what it is and what it does). Should I set hdlc to yes in misdn.conf (I'm asking before testing because this is a production system)? misdn.conf: [general] misdn_init=/etc/misdn-init.conf debug=0 ntdebugflags=0 ntdebugfile=/var/log/misdn-nt.log ntkeepcalls=no bridging=no stop_tone_after_first_digit=yes append_digits2exten=yes dynamic_crypt=no crypt_prefix=** crypt_keys=test,muh [default] context=misdn language=us musicclass=default senddtmf=yes far_alerting=no allowed_bearers=all nationalprefix=0 internationalprefix=00 rxgain=0 txgain=0 te_choose_channel=no pmp_l1_check=no reject_cause=16 nee...

Hi, My initial setup for receiving faxes worked as follows: fax call arrives on ISDN BRI connected to a BOSCH PBX, signal sent to ALCATEL PBX via PRI QSIG then finally sent to ASTERISK via PRI EUROISDN. The Asterisk server then forwarded the call to a iaxmodem and HylaFax received the data. All worked fine. Now I got rid of both BOSCH and ALCATEL in the "fax path" and it's as

You're quite right. We'll need to see your misdn.conf file to check the settings. -->> -----Original Message----- -->> From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users- -->> bounces at lists.digium.com] On Behalf Of Vieri -->> Sent: 06 February 2009 13:49 -->> To: asterisk-users at lists.digium.com -->> Subject:

...are configured identically. Cheers, Arik ===== CLI: misdn show config ===== (n.b. port 1=hfcpci; port 2=avmfritz) *CLI> misdn show config Misdn General-Config: -> misdn_init: /etc/misdn-init.conf -> debug: 0 -> tracefile: /var/log/asterisk/misdn.log -> bridging: no -> stop_tone_after_first_digit: yes -> append_digits2exten: yes -> dynamic_crypt: no -> crypt_prefix: ** -> crypt_keys: test,muh -> ntdebugflags: 0 -> ntdebugfile: /var/log/misdn-nt.log [PORT 1] -> name: intern -> allowed_bearers: all -> far_ale...

...default values: trace_calls : false ; trace_dir : /var/log/ ; ;trace_calls=false ;trace_dir=/var/log/ ; set to yes if you want mISDN_dsp to bridge the calls in HW ; ; default value: yes ; bridging=no ; stops dialtone after getting first digit on nt Port ; ; default value: yes ; stop_tone_after_first_digit=yes ; wether to append overlapdialed Digits to Extension or not ; ; default value: yes ; append_digits2exten=yes ;;; CRYPTION STUFF ; Wether to look for dynamic crypting attempt ; ; default value: no ; dynamic_crypt=no ; crypt_prefix, what is used for crypting Protocol ; ; default value: [not...

I may have found a source of an A-Ticked HFC 4BRI PCI adapter in Australia, and will be testing one next week if all goes well. I don't want to post the details of the reseller online unless invited to do so, so if nobody replies and says they are interested then I won't :) I'll follow up once I've tested it. Let me know if you want the details. James