search for: steve

While running the llvm tests, I get several error messages like these: [1/1] Running the LLVM regression tests FAILED: cd /home/steve/llvm-build/test && /usr/local/bin/python /home/steve/llvm/utils/lit/lit.py --param build_config=. --param build_mode=Release -sv --param llvm_site_config=/home/steve/llvm-build/test/lit.site.cfg --param llvm_unit_site_config=/home/steve/llvm-build/test/Unit/lit.site.cfg /home/steve/llvm-bu...

I am running OpenSolaris build 134 on a T1000 (Sparc). It has been an uphill battle getting this far. Many of the commands I find in the various documentation won''t work for me. ------------------------------------------------------------ steve@t1000:~# pfexec pkg install xvm-gui Creating Plan pkg: ''xvm-gui'' matches multiple packages system/xvm/xvm-gui xvm-gui steve@t1000:~# pfexec svcadm enable milestone/xvm svcadm: Pattern ''milestone/xvm'' doesn''t mat...

It's really weird how many times thing break in threes. This time is was my wife's laptop, my router and a phone. Anyway... My network has a router and 2 computers; my F11 box with the samba server on it called steve and my wife's laptop now running Windows 7 called Kellie-PC. My old router was a Linksys WRT54G that I had flashed with DD-WRT. I was using DHCP and DNS masquerading in the router. The new router is a CISCO E3000 which isn't supported yet by DD-WRT so no local DNS but I'm still using D...

Dear all, how can I "reshape"/"cast" the following matrix 00;01;10;11 John.Mike;123;313;12;31 John.Jim;54;57;39;36 John.Steve;135;47;47;74 Mike.Jim;63;37;27;16 Mike.Steve;15;15;5;61 Jim.Steve;6;10;34;35 into a set of stacked 2x2 contingency tables 0;1 John;123;12 Mike;313;31 John;54;39 Jim;57;36 John;135;47 Steve;47;16 ... so that the "fisher.test" and "chisq.test" can be "applied" to the...

...-dev/attachments/20120821/be3a9bbf/attachment.obj> -------------- next part -------------- On Aug 21, 2012, at 1:01 PM, Stephen Checkoway wrote: > While running the llvm tests, I get several error messages like these: > > [1/1] Running the LLVM regression tests > FAILED: cd /home/steve/llvm-build/test && /usr/local/bin/python /home/steve/llvm/utils/lit/lit.py --param build_config=. --param build_mode=Release -sv --param > llvm_site_config=/home/steve/llvm-build/test/lit.site.cfg --param llvm_unit_site_config=/home/steve/llvm-build/test/Unit/lit.site.cfg /home/steve/ll...

Hi Is there any way to park a call on an extension. Say a customer calls in and wants to speak with Steve. Steve is currently on the phone. How can I park the call so that when Steve hangs up his phone immediately rings and he is connected to the parked call. Thanks Kelly

...the mail correctly but the next recipients do not. ?ltmp apparently tries to create a link from the subsequent recipients' mail store to the first recipient mail store and fails. This returns 451 smtp codes to the sender which then resends at some later time. Please see below for users jerry, steve, and mary. The message to jerry gets written but not steve or mary: ul 27 11:24:41 testmailserver dovecot: lmtp(12412): Debug: none: root=, index=, control=, inbox= Jul 27 11:24:41 testmailserver dovecot: lmtp(12412): Connect from 143.112.53.4 Jul 27 11:24:41 testmailserver dovecot: lmtp(12412):...

...Cprl561 perl application SMCprngd prngd application SMCzlib zlib # pkginfo -l SMCegd SMCossh SMCprl561 SMCprngd SMCzlib PKGINST: SMCegd NAME: egd CATEGORY: application ARCH: sparc VERSION: 0.8 BASEDIR: /usr/local VENDOR: Brian Warner PSTAMP: Steve Christensen INSTDATE: Mar 26 2002 18:15 EMAIL: steve at smc.vnet.net STATUS: completely installed FILES: 25 installed pathnames 2 shared pathnames 4 directories 4 executables 247 blocks used (approx) PKGINS...

...yboard-interactive) I did the compiles the exact same way. Why would one compile work, but not the other? I would like to migrate to the newer version, since it has some security fixes. Is there something I need to do during compile, or is this a runtime configuration thing? Thanks in advance, Steve -- Steve "Wheat" Belt Motorola, Inc. Steve.Belt at motorola.com 6501 William Cannon Dr. West, MD OE341 512-895-2268 Austin, TX 78735

...Subject line so it is more specific > than "Re: Contents of samba digest..." > > Today's Topics: > > 1. Re: samba-tool set default group (Matthieu Patou) > 2. Re: latest Samba 4 does not look in keytab (Matthieu Patou) > 3. Re: samba-tool set default group (steve) > 4. Samba4 internal dns server cannot find ldap (steve) > 5. Re: samba 4 provision fails [solved] (steve) > 6. About SAMBA Configuration (Uttam Shrestha Rana) > 7. Re: About SAMBA Configuration (Adam Tauno Williams) > 8. Samba 4 no longer accepts SASL GSSAPI? (steve) >...

My username is different on my Linux box than on my Windows box so I used the line username map = /etc/samba/smbusers in my smb.conf file and this file includes the line steve = steveb However when I'm logged on to my Linux box as 'steve' and use the smbclient command like this: # smbclient //<Windows computer>/Shared ... session setup failed: NT_STATUS_LOGON_FAILURE it still tries to log me on with my Linux username. I checked this using Ethereal....

...Also, I read somewhere that the two skinny implementations (chan_sccp and chan_skinny) were going to be merged, any news on this? Here's a skinny debug of a call being made to a queue: Linux3*CLI> skinny debug Skinny Debugging Enabled -- Starting simple switch on '111@steve' Collected digit: [6] -- Asked to indicate 'Stop tone' condition on channel Skinny/111@steve-2 Collected digit: [2] -- Asked to indicate 'Stop tone' condition on channel Skinny/111@steve-2 Collected digit: [2] -- Executing Queue("Skinny/111@steve-2",...

...to the introduction of the "printjob username" configuration parameter. I print via CUPS and the Cups-PDF driver wants to know the Linux username (so it can put the PDF in the proper location). The problem is that "printjob username = %U" results in a lowercase username ("steve"), even though the Linux account is "Steve". The Samba logs clearly show me authenticating as "Steve" and the last message I see (with logging at 20) with an obvious user name shows me connecting to the Cups-PDF printer share with username "Steve". But, the Cups...

Hello, struggling with the very basic needs... :( any help appreciated. #using the package doBY #who drinks how much beer per day and therefor cannot calculate rowise maxvals evaluation=data.frame(date=c(1,2,3,4,5,6,7,8,9), name=c("Michael","Steve","Bob", "Michael","Steve","Bob","Michael","Steve","Bob"), vol=c(3,5,4,2,4,5,7,6,7)) evaluation # maxval=summaryBy(vol ~ name,data=evaluation,FUN = function(x) { c(ma=max(x)) } ) maxval # over all days per person #function...

....SITE 2 cifs/HH3.HH3.SITE at HH3.SITE 2 cifs/HH3.HH3.SITE at HH3.SITE 2 cifs/HH3.hh3.site at HH3.SITE 2 cifs/HH3.hh3.site at HH3.SITE 2 cifs/HH3.hh3.site at HH3.SITE 2 cifs/hh3.HH3.SITE at HH3.SITE 2 cifs/hh3.HH3.SITE at HH3.SITE 2 cifs/hh3.HH3.SITE at HH3.SITE 1 steve4 at HH3.SITE 1 steve4 at HH3.SITE 1 steve4 at HH3.SITE 2 steve5 at HH3.SITE 2 steve5 at HH3.SITE 2 steve5 at HH3.SITE 1 lynn2 at HH3.SITE 1 lynn2 at HH3.SITE 1 lynn2 at HH3.SITE This all seems OK: Kerberos: TGS-REQ steve-pc$@HH3.SITE from ipv4:192.168.1.2:46585 for...

...5cc_0 with an expiry time. I've created a host principal and put it into the keytab: samba-tool spn add host someuser samba-tool domain exportkeytab /etc/krb5.keytab --principal=host/HH3.SITE How can I keep Samba 4 up without having to get a new Administrator ticket every 10 hours? Thanks, Steve

...nse from anyone in the R-core about this issue. Since our group uses locally-written code (in S+) that is object-oriented, R is useless to us until this capability exists. Do any of you have this on your tasks-list, or should we <attempt> to add attribute inheriting on our own? Thanks...Steve Oncley (oncley@ucar.edu) P.S. Please respond directly to me (or r-help), since I'm not on r-devel. -.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.- r-devel mailing list -- Read http://www.ci.tuwien.ac.at/~hornik/R/R-FAQ.html Send "info", "help&quot...

Thanks Steve, I will have a look at it. I think it's important to sync the idmap.ldb limits because in case of a crash of the schema master DC another DC must be seized and may not reassign already used ids in rfc2307 for new users or groups. Am 11. Dezember 2014 23:07:06 MEZ, schrieb steve <steve at s...

Hello, a have two matrices of data as below. I would like to add-up the duplicate in terms of pair of names in rows, and then merge the values in the second matrix to the pairs as two new variables x3 and x4. Input ,x1,x2 jane.mike,31,43 jane.steve,32,2 jane.steve,5,3 jim.mike,76,5 jane.steve,4,4 mike.steve,54,7 mike.steve,5,7 jane.mike,7,8 and ,y jane,0.3 jim,0.4 mike,0.1 carl,0.5 john,0.9 steve,0.4 dirk,0.2 Output: ,x1,x2,x3,x4 jane.mike,38,51,0.3,0.1 jane.steve,41,9,0.3,0.4 jim.mike,76,5,0.4,0.1 mike.steve,59,14,0.1,0.4 Any help appre...

Hi In Windows 7, user steve can change his own password. On a Linux client, Admin can change the password: net ads password steve abc123 -UAdministratator%xyz456 How does steve change his own password when logged into Linux? Linux Client=Samba 3.6.1 Thanks Steve