search for: st3500630ns

...=6 /dev/sd[cdefgh]1 "mdadm: cannot open /dev/sdc1: Device or resource busy" with pvcreate, it seems as if there was no device, but I clearly see it in /dev/sdc1... "Device /dev/sdc1 not found (or ignored by filtering)." partprobe yields: "device-mapper: remove ioctl on ST3500630NS_9QG0P0PY1 failed: Device or resource busy Warning: parted was unable to re-read the partition table on /dev/mapper/ST3500630NS_9QG0P0PY (Device or resource busy). This means Linux won't know anything about the modifications you made. device-mapper: create ioctl on ST3500630NS_9QG0P0PY1part1-mp...

...m my configuration. I''ve this configuration (I''m not interested in raw top performances but in reliability.. so, I can accept slow MB/sec and prefer to rely on a RAID6, for example): 1 Infortrend iSCSI Array A16E-G2130-4 with: - 1GB DDR cache - RAID6 - 7 x 500GB sataII Seagate ST3500630NS with 16mb (no budget for SAS) - one of the logic volumes (about 1TB) is actually bounded to a single channel 1 DELL PE1950 server with: - QLogic iSCSI HBA QLA 4060C - 2 x Quad core x5335 2GHz Xeon - 8GB RAM - 2 x 73GB SAS drives (raid1 software) 1 DELL 2716 gigabit switch in the middle The arr...

I have a Dell PowerEdge 2950 and am looking to add more storage. I know a lot of factors can go into the type of answer given, but for present and future technology planning, should I look for a rack of SATA, SCSI, or fibre channel drives? Maybe I'm dating myself with fibre channel, and possibly SCSI? I may be looking to add a few TB now, and possibly more later. What are people

Under Solaris 10 u6 , No matter how I configured my ARECA 1261ML Raid card I got errors on all drives that result from SCSI timeout errors. yoda:~ # tail -f /var/adm/messages Jan 9 11:03:47 yoda.asc.edu scsi: [ID 107833 kern.notice] Requested Block: 239683776 Error Block: 239683776 Jan 9 11:03:47 yoda.asc.edu scsi: [ID 107833 kern.notice] Vendor: Seagate

I''ve just made my first ever attempt at an Nullsoft installer, so if you want to try it download "Xen PV Drivers 0.9.5.exe" from http://www.meadowcourt.org/downloads/ The installer should detect the version of windows you are running and install the drivers. At the moment you''ll need to install the shutdown monitor service manually, but you can do that from the start

I''ve just made my first ever attempt at an Nullsoft installer, so if you want to try it download "Xen PV Drivers 0.9.5.exe" from http://www.meadowcourt.org/downloads/ The installer should detect the version of windows you are running and install the drivers. At the moment you''ll need to install the shutdown monitor service manually, but you can do that from the start