search for: st3500630as

...ors: 0 Hard Errors: 0 Transport Errors: 0 Model: ST3200822A Revision: Serial No: 4LJ Size: 200.05GB<200047067136 bytes> Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0 Illegal Request: 0 c4d0 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0 Model: ST3500630AS Revision: Serial No: 6QG Size: 500.10GB<500101152768 bytes> Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0 Illegal Request: 0 c4d1 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0 Model: ST3500630AS Revision: Serial No: 6QG Size:...

...localhost,8G,54569,99,249788,68,75268,11,59128,91,211926,15,587.2,0,50:158999:5125/1000,748,15,256,1,1081,5,713,15,108,0,207,1<br> <br> <br> What i want to know is: Anyone use or recommend EXT3 for Maildir?<br> <br> My configuration: 3Ware 9650SE-8LPML, 8 drives SATA2 ST3500630AS 500GB on RAID 10.<br> <br> Regards,<br> <br> Heitor A.M. Cardozo</font></font> </body> </html>

...usr /dev/sdb5 ext3 40G 25G 13G 67% /home /dev/sdb1 ext3 107M 52M 50M 52% /boot */dev/sdb8 ext3 111G 79G 27G 76% /srv/multimedia* tmpfs tmpfs 2.9G 35M 2.9G 2% /dev/shm Parted info: (parted) select /dev/sdb Using /dev/sdb (parted) print Model: ATA ST3500630AS (scsi) Disk /dev/sdb: 500GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 115MB 115MB primary ext3 boot 2 115MB 32.3GB 32.2GB primary ext3 3 32.3GB 35.5GB 3224MB pr...

...controller: set curctrl=1 set password=0000 GuiErrMsg<0x00>: Success. rsf delete raid=1 GuiErrMsg<0x00>: Success. CLI> disk info # ModelName Serial# FirmRev Capacity State =============================================================================== 1 ST3500630AS XXXXXXXXX 3.AAE 500.1GB Free 2 ST3500630AS XXXXXXXXX 3.AAE 500.1GB Free =============================================================================== GuiErrMsg<0x00>: Success. CLI> sys changepwd p=XXXXXXX GuiErrMsg<0x00>: Suc...

...mdma 0xe400 irq 10 ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xe408 irq 10 ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata3.00: ATAPI: PIONEER BD-ROM BDC-202, 1.01, max UDMA/66 ata3.00: configured for UDMA/66 ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata4.00: ATA-7: ST3500630AS, 3.AAC, max UDMA/133 ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) ata4.00: configured for UDMA/133 sda is HD sdb is HD again RAID1 sdc is the HD extra sdd should be hte ATAPI DVD but it ends up being the external USB nothing is at sde Where might my DVD be? Jerry

...D1 Instances of EXT3 errors which caused read only FS : a. ?EXT3-fs error (device sdb1): ext3_lookup: unlinked inode 8766158 in dir #8765708? 2. Red Hat Enterprise Linux Server release 5.2 (Tikanga) 2.6.18-92.1.10.el5 #1 SMP x86_64 Dell PERC 6/i - Write back cache enabled Battery available 2 * ST3500630AS 500GB in RAID1 Instances of EXT3 errors which caused read only FS : a. ?EXT3-fs error (device sda3): ext3_lookup: unlinked inode 89065027 in dir #89065024? b. ?EST3-fs error (device sda3): htree_dirblock_to_tree: bad entry #65077525: rec_len is smaller than minimal - offset=0, inode=0, rc_len=0,...

...and > let > it cool for a few hours, then restart, card fan speed is fine for a few > hours, > then the fan speed goes back through the roof. Temps are not the problem. > CPU > temps never get above 38 deg. C, drive temps are: > > 05:40 archangel:~> hdtemp > /dev/sda: ST3500630AS: 35?C > /dev/sdc: ST3500630AS: 40?C > /dev/sdb: ST3750330AS: 37?C > /dev/sdd: ST3750330AS: 38?C > > GPU temp reports 67 deg C, and case ambient (reported by the nvidia card is > at > 50 c.) My guess says it looks like an nvidia driver temp reporting issue > there. But there...

...cd0: DMA limited to UDMA33, controller found non-ATA66 cable acd0: DVDR <Memorex DVD+-RAM 510L v1/MWS7> at ata0-master UDMA33 ad4: 381554MB <Seagate ST3400620AS 3.AAJ> at ata2-master SATA300 ad6: 381554MB <Seagate ST3400620AS 3.AAJ> at ata3-master SATA300 ad8: 476940MB <Seagate ST3500630AS 3.AAE> at ata4-master SATA300 ad10: 381554MB <Seagate ST3400620AS 3.AAJ> at ata5-master SATA300 ad12: 381554MB <Seagate ST3400620AS 3.AAJ> at ata6-master SATA300 ad14: 381554MB <Seagate ST3400620AS 3.AAJ> at ata7-master SATA300 ipmi0: IPMI device rev. 1, firmware rev. 1.2, vers...